rebuilding a protank 2

[nate806]

after doing some research i've decided on getting a kangar protank 2.

My question is, what part/parts do i need to replace to restore it? I found an EVOD Protank Coil Wick. Is that all that needs replacing? do i need to find a V2 version of the coil wick or are they both the same?

A little confused as when i was vaping i only used carts/attys without tanks.

 

[mightymen]

Got Resistance Wire and pickup some wire I use 32 ga

Then your need wick I use cotton squares(make up dept) from CVS $3.79 last a life time.

Best to go to UTUBE lots if video's on how to make wick/coil it's pretty easy with the protank.

Don't throw out the heads you got with the protank that's re-useable.

If you want more heads goto http://www.aquavaporcig.com/5-Pack-Coils-for-PRO-Tank-Bottom-Coil-Clearomizer-BCC_p_720.html 5 for $7.95 shipping $1.50

 

[RoudyruffKK]

really depends are you talking about rebuilding a coil or replacing the coil? if you're rebuilding then follow what mightymen said. if you just want to replace the coil you can easily find those online for about $1/coil in packs of 5

 

[ImageX]

after doing some research i've decided on getting a kangar protank 2.

My question is, what part/parts do i need to replace to restore it? I found an EVOD Protank Coil Wick. Is that all that needs replacing? do i need to find a V2 version of the coil wick or are they both the same?

A little confused as when i was vaping i only used carts/attys without tanks.

Yes, the Protank 2 and Evod use the same coil head. That's all you will need when the time comes. The good thing about the Protank 2 is that you can build your own coils if you choose and install them on the old coil head. Search Youtube for complete instructions on how to do this. Most people just replace with a cheap prebuilt evod/protank coil though. I do both.

 

[nate806]

im currently using a phoenix with meh results. Although i got a little more advice on rebuilding earlier today, i'd like to have a failsafe plan B. ran out of wire today and instead of ordering more thinking i want a tank mod. Thank you all very much! =D

 

[cope]

rebuilding a micro coil for the pro tank is so easy use a cotton wick and its rockin you dont need a flavor wick i havent had any flooding issues yet...the coil lasts weeks just clean it up dry fire alittle not too much and re wick...
look on e-bay i got 100ft of 32g kanthal a-1 wire for 10 bucks

 

[f1vefour]

Check this thread for a nice bit of information regarding rebuilding Kanger heads http://www.e-cigarette-forum.com/forum/showthread.php?t=463771