Rebuilding a ViVi Nova

Status
Not open for further replies.

bubbadreier

Super Member
ECF Veteran
Verified Member
May 14, 2012
316
112
oklahoma
Kanthal A-1 is the wire you will be looking for. I am not certain where you can buy it locally, but eBay tends to be where most people get it. 28-36 gauge is what you are looking for depending if you want to build a low res coil, standard, or high res coil.

Oh and certain e cig stores carry the wire, but it tends to be expensive for a small amount.
 

QBerry21

Senior Member
ECF Veteran
Verified Member
Oct 25, 2012
77
14
Sherwood, Oregon
Kanthal A-1 is the wire you will be looking for. I am not certain where you can buy it locally, but eBay tends to be where most people get it. 28-36 gauge is what you are looking for depending if you want to build a low res coil, standard, or high res coil.

Oh and certain e cig stores carry the wire, but it tends to be expensive for a small amount.

Awesome, thanks! And I think I read somewhere before that if you want a low res coil (which is what I would want), you need to use a larger gauge. Is that correct?
 

Vapoor eyes er

ECF Guru
ECF Veteran
Sep 13, 2011
11,028
8,945
Toronto, Ont.
I agree with elmattias about kanthal 32 gauge wire and cotton. A few things to understand before you begin:
Boil the cotton for 15 minutes before using.
Be absolutely sure there are no shorts after wiring up the head.
Test the resistance of the new coil.
Realize although cotton wick is far superior to other wicking materials it cannot be dry burned.
Best of Luck
 
Last edited:

Vapoor eyes er

ECF Guru
ECF Veteran
Sep 13, 2011
11,028
8,945
Toronto, Ont.
Unfortunately it's because you're over 70 posts...too low a number to bar new vapers from posting in New Members Section IMO.

Totally off subject, but ECF is not letting me post new threads today :( - Where do you buy your vivi from? I have looked at several sites and just don't know which one would be best. I am looking for a mini vivi BTW.
 

Iffy

Vaping Master
ECF Veteran
Verified Member
Feb 3, 2011
9,626
79,411
Florida Suncoast
Vivi Nova Rebuild Tutorial - loooong!
BigGrin-1.gif
 

DtEarth

Full Member
Verified Member
Nov 1, 2012
69
60
53
Philly
Just rebuilt my Vivi nova last night. There are plenty of videos out there on ECF and youtube on how to do this. There are also many different ways of wicking. 100% unbleached cotton with 30 gauge A-1 Kanthal works best for me. I've rebuild many different kinds of rebuildables and this is easiest in my opinion. I get my supplies from Elite vapor and OKC vapor. And do also check out the rebuildable section on ECF that is lots of info available.
 
Status
Not open for further replies.

Users who are viewing this thread