- Status
Looking forward to seeing your skirt!
Adding: I have taken a blown ego mega cartomizer and cut off the skirt and I am sanding it down. Hoping to match the notches and have the right height without over doing it. If I get it wrong, I'll have to wait until a second Mega blows-LOL. It will take awhile (to blow one) as I very seldom use this stuff since I purchased the VapeMate. I do have the need to try out new items as they come out. And I like to put them on my Precise-LOL.
Sorry David, not trying to make the P look fugally, just like to play with the new toys and make them work on these babies.
Last edited:
I inquired about the beveled cap both in my purchase order and in follow up emails. I actually got both the brass and the stainless steel. No response to either inquiry and no bevel delivered. Maybe I wasn't cute enough.
I still love my P18. But, feel slighted after seeing you got your wish granted, while my request was disregarded without a response. I even suggested that I would pay extra if required.
Congratulations Bella. I've been telling you for weeks you'd be delighted. The Precise is a beauty!
I apologize for that. You weren't the only one as I was just so behind the past few months i wasn't able to fulfill a few other requests for beveled caps too. Chad, my part timer is back now (he was gone for fall semester in college) so i'm finally catching up. Feel free to send it in and i'll bevel it for you, no problem!
David
Bella-told you you'll love it,much smaller than you thought,right?It is vaping Jewelry.
glad you finally got it.looking forward to a review.
I inquired about the beveled cap both in my purchase order and in follow up emails. I actually got both the brass and the stainless steel. No response to either inquiry and no bevel delivered. Maybe I wasn't cute enough.
I still love my P18. But, feel slighted after seeing you got your wish granted, while my request was disregarded without a response. I even suggested that I would pay extra if required.
Congratulations Bella. I've been telling you for weeks you'd be delighted. The Precise is a beauty!
Congrats Bella!!! O happy day!
Thanks guys!!! I couldn't be more happy, I just absolutely love my P16 and I have been vaping myself silly. I should have probably gotten lower nic juice lol. The 3.0 - 3.2ohm XL clear cartomizers really rock on this thing too, warmer than the ego and pretty much perfect in my opinion. I'm still going to give the 2.8 - 3.0ohm a go just for curiosity sake lol. I can't believe I have my P16!!!
Hey Bella... congrats on the new toys!
I'm curious about your cartos? I tried a CE2 carto and liked how it worked, but refilling the thing was such a hassle that I haven't bothered with them since. But I'm curious about the clear tank thing. Where do you get the CE2 cartos with the clear tanks, how much liquid do they hold, and what does it take to refill them?
Hmmm... perhaps you've done a video review of them... ah, yes you have... I'm off to watch it now... thnx
Cool, glad you found the video. You can get them from gotvapes.com. Great people to deal with. There is no primer taste or anything like that. They are super awesome. The 3.0 - 3.2 ohms are very nice on my P16. They were a whole lot cooler on my eGo and Riva batteries but a nice medium warm on my P16. I am very very pleased indeed. the 2.4 - 2.6 ohm ones are way to warm for me on my P16 and they don't seem to wick quickly enough either, just a lil fyi.
Thnx! I was going to ping you about where you got them since you didn't mention it in your vid, but you beat me to it
Yup, the P16 delivers the full power of the batt whereas the eGo/Riva has circuitry which drops the voltage (and power) down a few notches, so not surprising that your cartos kick harder on the P16. About the CE2s, I was pretty surprised at how it performed when I tried it. Comparable to LR attys, but at much higher resistance levels, so lower power consumption and batteries should last longer (as compared to LR attys).
Thanx again for the pointer to a retailer for these things. Looks like cloudsofvapor.com has them too.
Yea, a few of us were discussing the same thing, cutting/sanding down the skirt, but that will be a last resort for me. I have a 510-510 connector that is 1/4 inch and thinking of doubling that up, but it looks like 7/16 is the tolerance that is needed. But it is all theoretical until I get my Provari in 2-3wks to see how the set-up with connectors will work on this particular model.
I just got the 2nd generation of the eGo-T atomizer and this thing is blowing clouds of vapor like crazy on an ego 650 battery, not to mention really nice taste. I know people have differing opinions about the ego tank, but for me, I am loving it and hoping to set it up on my Provari.
Heck, if I can get it to work on the Provari, my next mod will be the p-16/18--which these were a toss-up between the Provari.
cheers,
Last edited:
Thnx! I was going to ping you about where you got them since you didn't mention it in your vid, but you beat me to it
Yup, the P16 delivers the full power of the batt whereas the eGo/Riva has circuitry which drops the voltage (and power) down a few notches, so not surprising that your cartos kick harder on the P16. About the CE2s, I was pretty surprised at how it performed when I tried it. Comparable to LR attys, but at much higher resistance levels, so lower power consumption and batteries should last longer (as compared to LR attys).
Thanx again for the pointer to a retailer for these things. Looks like cloudsofvapor.com has them too.
I actually got them in a coop but I am getting them from gotvapes now. They actually are in with the manufacturers to make them to there specifications and just how they want them and are also involved in making them better and all that kind of stuff so they are a very great supplier for being that close to the manufacturer to make us happy. Just some more helpful info
Cloudsofvapor.com also carries a few C-E2 tanks. If you order one, do not go below 2.8. I have some 2.5's and they are too hot and give a burnt taste and require cleaning too often.
To fill the tanks you simply pop off the top plugs.
To fill the tanks you simply pop off the top plugs.
I inquired about the beveled cap both in my purchase order and in follow up emails. I actually got both the brass and the stainless steel. No response to either inquiry and no bevel delivered. Maybe I wasn't cute enough.
I still love my P18. <snip>
Congratulations Bella. I've been telling you for weeks you'd be delighted. The Precise is a beauty!
David, so sorry I have left you without a response on this.
It's a beautifully made device and by far my best PV to date!
Thanks for your offer to do the beveling after the fact. I'm ending day 9 of 18 straight 12 hour work days without a day off though, so I doubt I'll pursue it until I've recuperated with a couple days off, LOL. so, I hope there's not an expiration soon on that offer. I'm most definitely NOT a workaholic. But, I'm glad to say my problem isn't a lack of work.
My P18 is getting closer to home! As the subject line says.... 
definitely tomorrow! 
Looks like it's going to be tomorrow! Until then, carry on!
As the subject line says.... definitely tomorrow! Looks like it's going to be tomorrow! Until then, carry on!
Last edited:
My P18 is getting closer to home!
Looks like it's going to be tomorrow! Until then, carry on!
I bet you are on pins and needles! I just know without a doubt that you will be pleased.
I am on pins and needles waiting but it's in VA now and fairly close! So, tomorrow for sure!
I just found a P16 on the classifieds! I hope I can get that P16! YeeHa!!! I got the P16 coming now too! That will complete the set!
Now, waiting for the Shockwave to appear!! Always something waiting to be bought!
I just found a P16 on the classifieds! I hope I can get that P16!
YeeHa!!! I got the P16 coming now too! That will complete the set!Now, waiting for the Shockwave to appear!!
Always something waiting to be bought!
Last edited:
Woo hoo for you. I bet you are super excited and you are going to love them both! I'm so happy to finally have mine and I still can't believe how awesome it is
Whoppie!!! P18 has landed with a cloud of vapor!
It is awesome! This should hold me over til next week when the P16 arrives!
Thanks David, another awesome SuperT!!
It is awesome! This should hold me over til next week when the P16 arrives!
Thanks David, another awesome SuperT!!
AWESOME! Take a picture and let us see I bet you are super excited to have it in your hand huh...I know I'm lovin my P16!
I bet you are super excited to have it in your hand huh...I know I'm lovin my P16!
Isn't it nice Grammie? I tell ya-I don't understand how some people sell theirs.
I can't understand why anyone would sell their SuperT Precise (any size). But, I am so pleased to have found it on the classifieds!
I will try to get a picture next week some time when I have all 3, the family of Precise together!
I am loving the P18! So far, only used carto's on it, getting ready to hook up the VapeMate! I won't be able to see the computer for a while with that going!
I will try to get a picture next week some time when I have all 3, the family of Precise together!
I am loving the P18! So far, only used carto's on it, getting ready to hook up the VapeMate! I won't be able to see the computer for a while with that going!
- Status
Similar threads
