Recommendation for a small sized 18650 mod please

[Rivers]

Hi, I am looking for recommendations for a small sized mod aand a rebuildable atomizer and would greatly appreciate recommendations on this.

mod
===
Able to run via wattage
Low wattage requirements - I don't do anything over 30watts currently
Utilizes 18650 battery
Small sized


Atomizer tank
=============
Rebuildable
Flavor over clouds
Easy to rebuild
Small sized

Thanks in Advance!

 

[Two_Bears]

Hi, I am looking for recommendations for a small sized mod aand a rebuildable atomizer and would greatly appreciate recommendations on this.

Mod
===
Able to run via wattage
Low wattage requirements - I don't do anything over 30watts currently
Utilizes 18650 battery
Small sized


Atomizer Tank
=============
Rebuildable
Flavor over clouds
Easy to rebuild
Small sized

Thanks in Advance!

See my blog for the review of the istick Pico..

It used a 18650. Fires at 1-75 watts. Weighs almost 1 ounce less than the eVic VTC Mini, more pocket friendly.

I like the Pico more than my Sigelei75, Cloupor Mini plus, and my two eVic VTC Mini's.

There is only 1 problem with the Pico. Since the 510 is 11 mm below tgee end of the 18650 larger mods 24 mm diameter and larger attys will not fit the Pico. 23 mm atties fit with no problems.

 

[Rixsta]

Istick Pico !

Tootle Puffers, Part Three! (The Sequel of the Redux)

 

[Rivers]

Think i might go for istick pico like you guys recommended.

Any suggestions for a RTA? Thinking of going with the uwell crown.

 

[Eskie]

Think i might go for istick pico like you guys recommended.

Any suggestions for a RTA? Thinking of going with the uwell crown.

The Pico is a great choice. As to tanks, you listed the following,
Atomizer Tank
=============
Rebuildable
Flavor over clouds
Easy to rebuild
Small sized

Does this mean you want a rebuildable RTA? Or something using factory coils that offers an RBA option?

 

[Rathamar]

If you are running an 22mm tank I say the Smoant Knight V1 - Very Compact & built like a tank, but very heavy. It is solid Stainless Steel.

If you want cheap - you cant beat the One Mod from Hana Mods - $26 with Shipping, I love this little mod! Light Weight, DNA 40 board but it is plastic and cheap.

 

[Rathamar]

For Tanks, I would recommend either a Kanger Top Tank with the RBA head or the Smok TFV4 mini with the RBA Head, both are easy to build. The Top Tank will give you a more restrictive Airflow then the TFV4 but I think the flavor is better on the TFV4.

 

[Two_Bears]

Think i might go for istick pico like you guys recommended.

Any suggestions for a RTA? Thinking of going with the uwell crown.

RTAs are much more complicated than recommending a mod, and here is why.

Do you like single or dual coils?
Do you like MTL or DL vaping?
Are you a cloud chaser or flavor chaser?
Do you like bottom or top airflow?
Do yoy want temp Control or power mode vaping?
Do you want a standard RTA or DL you want a Genesis of a new RDTA like the Azeroth, Theorem, Limitless?
Is it ok to trap leads under screws, do you have to have post holes like the Orchid, Goblin, or DO you want a postless deck as in the Bachelor, Petri, etc?

 

[daviedog]

Kfun v3mini,,single coil.
Goblin mini,,dual coil.

 

[Baditude]

Think i might go for istick pico like you guys recommended.

Any suggestions for a RTA? Thinking of going with the uwell crown.

I have been using the Uwell Crown 1 for a few months and love it. It is a sub-ohm tank which can take factory-made coils of different coil resistances and different wire configurations (kanthal, stainless steel, nickle). Wide range of air control. Great for both flavor and vapor production.

However, it's a pretty large tank and may look silly on a Pico and kinda defeats your intended desire to stay small. It does have an accessory RTA adaptor available (separate purchase), but the reviews I read were not so great.

You might look into the Aspire Nautilus X clearomizer tank if you're looking for a smaller (shorter) sized tank which takes factory-made coils.

 

[Zurd]

iStick Pico! Very nice device!

But as Two_Bears said, it doesn't fit big atomizers, it's a small device after all. Do your dimensions calculations before buying!

 

[Grimwald]

For a tiny tank that still holds 3-4 mils I like the goblin mini.

 

[jjatl]

I don't know specifically what kind of tank you are looking for, but the Serpent Mini is compact, holds a good amount of e-liquid and has great flavor. It is extremely popular here at ECF: Wotofo Serpent Mini

 

[WhiskeyTango]

I'll second (or third or fourth) the Pico and Goblin Mini v2 or v3. I started with one for a work mod and now I've ordered a few more just to keep around the house in different places. Looks good and vapes great.

 

[Jonner]

Rixsta, good to see you too! We think too much alike:

View attachment 556079

Pico with Serpent Mini
Apologies in advance if it doesn't work, difficult with phone

 

[Flt Simulation]

eVic-VTC Mini . . . . (82mm x 38mm x 22mm)

Kayfun Lite-Plus V2 clone

 

[ScandaLeX]

Allow me to jump in here & cosign Pico + Serpent Mini!!

Skip the Crown tank- it'd look absolutely ridiculous on such a small mod like the Pico.

 

[DaveP]

I've been an iStick lover for years now. The Pico solved my USB charging issues with its replaceable 18650. While I'm out I keep a small hard shell zipper container in the car with an 18650 and a 15ml bottle of juice.

The case is smaller than it looks. It's about an inch longer than an 18650. It fits into a pants pocket easily and holds a battery (or two) and a 15ml juice bottle with room to spare and has a belt clip.

Amazon.com: Efest Carrying Case for 18650 / 26650 Batteries: Cell Phones & Accessories

 

[DaveP]

I've been a KF2 lite plus V2 Tootle Puffer for years now. There has to be something even better for flavor out there. I hear good things about the KF Mini V3, but it's also a mini juice capacity.

So, what's the latest and greatest MTL tank these days? Leak Free, 4ml-5ml, easy build and even better flavor is what I look for. I have the KF2, KF3, KF4, and KF5 already. Maybe it's impossible to improve.

 

[Two_Bears]

I've been a KF2 lite plus V2 Tootle Puffer for years now. There has to be something even better for flavor out there. I hear good things about the KF Mini V3, but it's also a mini juice capacity.

So, what's the latest and greatest MTL tank these days? Leak Free, 4ml-5ml, easy build and even better flavor is what I look for. I have the KF2, KF3, KF4, and KF5 already. Maybe it's impossible to improve.

The best flavor chaser RTA IS almost a tie.

Goblin Mini
Silverplay Nano

If i could get spare bell caps, chimneys, abd bases that us all i would ever use.

I can't get those spare parts so i use the short Kayfun in my avatar