Recommendations please

[suprtrkr]

I just bought a new (clone) mech before dropping big bucks on the authentic, and I am looking for a nice RTA tank to put on it. My purpose is out-and-about carry, so I don't really want an RDA or and RDTA.

My specs are:

Minimum 4ml capcaity (and up to 6ish)
Maximum base diameter 23mm
Single coil
Free breathing for direct lung hits
Bonus: A brass tone to the atomizer would look good, but I wouldn't rule out stainless or black
Bonus: A metal tank "glass," or a screen, would be a plus as well.

I don't insist on the latest and greatest; old school will do so long as I don't have to fill it by taking a tiny screw out of the base and use a syringe to get the juice in. In fact, with the 23mm limitation, it will almost have to be. New ones seem to come bigger these days.

Suggestions?

 

[bombastinator]

i had great luck with the Solomon 2 not leaking till I broke the glass. If you can avoid doing that it should work well. The bubble glass is (much) more functional than the tube glass. The tank wall is so close to the coil enclosure that it doesn’t vent air very fast with the tube glass.

 

[suprtrkr]

MTL or DL? 22mm I assume? Color?

DL. Brass if possible, stainless or black will do.

 

[bombastinator]

DL. Brass if possible, stainless or black will do.

The Solomon 2 has a brass/stainless that might go well. Se previous post for caveats though. The bubble glass (fat boy glass) is basically required for the tank to work well as far as I can tell.

 

[suprtrkr]

The Solomon 2 has a brass/stainless that might go well. Se previous post for caveats though. The bubble glass (fat boy glass) is basically required for the tank to work well as far as I can tell.

Thank you. I wanted 23mm or less because that's the size of the recess in the mod top, so a bubble tank wouldn't bother me. But the specified 24mm diameter may be the glass and not the base. Anybody have one, and a pair of calipers handy? I do like the deck design.

 

[bombastinator]

Thank you. I wanted 23mm or less because that's the size of the recess in the mod top, so a bubble tank wouldn't bother me. But the specified 24mm diameter may be the glass and not the base. Anybody have one, and a pair of calipers handy? I do like the deck design.

As it happens I just bought one. Base is 24.18 :/

 

[suprtrkr]

As it happens I just bought one. Base is 24.18 :/

Not to worry. I think I shall try one anyway, just to see how it stacks up to my current favorite single coil tank, the Serpent SMM.

 

[bombastinator]

So the trip to the caliper committed me to this venture. Googling about there are several coppervape attys that might work, as well as the serpent. The only modern atty I own that fits the bill is the ammit and I personally find it a bit too leaky. If you want it to really not leak you have to do a perfect wicking job.

 

[suprtrkr]

So the trip to the caliper committed me to this venture. Googling about there are several coppervape attys that might work, as well as the serpent. The only modern atty I own that fits the bill is the ammit and I personally find it a bit too leaky. If you want it to really not leak you have to do a perfect wicking job.

Thanks

 

[Letitia]

You might consider a Kanger Toptank with the rba head. Not sure if the rba protrudes enough for a mech. I have a black Engine Nano that you might like, 24mm iirc.

 

[suprtrkr]

You might consider a Kanger Toptank with the rba head. Not sure if the rba protrudes enough for a mech. I have a black Engine Nano that you might like, 24mm iirc.

I Did not think of that!

 

[Letitia]

I Did not think of that!

lol Not sure if it's a good thing but you can pick up a Toptank for 20.00 at MFS. It comes with the rba and you can pick up spares at ft.

 

[mimöschen]

What about the Wotofo Conqueror?
22mm, fits 4ml, DL with a little bit of restriction, can be built single and dual coil, has JFC, isn't prone to breaking because of its large metal encasing and has a protruding 510 for mech mod use.
You don't have a brass option though, but it is available in stainless and black.
Overall a very good performer imo, that's still in use from time to time.

There is a 2ml mini version as well, but I can't comment on that.

 

[tac_driver]

another vote for the Engine Nano and if you can find it they have a gold version
never leaks, single coil, extraordinary flavor