Recommended RBAs for beginner?

[N0ks]

I started vaping about 4 months ago and i've grown a bit tired and annoyed of the inconsistency of some coils for my tanks. So i decided to get into RBAs to save a bit of monney and built them myself. However, im not sure where to start. I only order my stuff from Canvape but they seem to have a pretty decent selection of RBAs. The list of things i'd look for are:

-Easy to rebuilt
-Stainless Steel
-Adjustable airflow
-Compatible with itaste V3.
-at least 2.5ml capacity
-less then 50$

Right now im eying the Russian 91% that Canvape received recently, but the packaging is different then what i've seen on videos so im not sure its made by the same company. I need 2 RBAs because i vape 2 different juices throughout the day. Im also wondering about drippers, i have some juices that i have yet to try because im lazy and dont feel like trying them out only to find out i dont like them, Drippers might help here.

Does anyone have any recommendations?

 

[Katcandoo]

I have a EHpro Atomic clone that I use for dripping, and an EHpro kayfun lite clone as my RBA. Both are reasonably priced, easy to build, and good construction. Good luck!

 

[Shootist]

EHPro Kayfun Lite + V2.

 

[Sthur]

This KFL is small and will fit vv v3.

Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO

 

[serenity21899]

No sure of the dimension of the iTaste vv, but a Tobecco Kayfun mini is small.

 

[realsis]

I highly recommend the kayfun lite. Here is why, it's a very easy build, it does not leak or give any problems and it produces great vapor and the flavor is amazing!! I've tried a lot of different rbas and rsst and by far the kayfun lite is my most favorite! The flavor you get out of the kayfun is like no other! I wick mine with cotton and it's like eating a candy when I vape. The flavor is just that good. And the kayfun lite is a bottom fill no mess no leaking and has never given me any type of trouble! ! The deck is super easy to build on and no matter what type of build I've done I always have gotten a consistent vape with thick dense vapor and loads of flavor. You will not be disappointed if you get the kayfun lite. I have the kayfun 3.1 but like the lite better because the 3.1 fills from the side and the light the bottom and for me it's much easier. Once you try the kayfun other tanks flavors won't compare. Except maybe the taifun but the taifun can be more of a difficult build and wicking so kayfun lite is perfect for a beginner. I use my kayfun lite as my daily vape. All other rbas and rsst just don't have the flavor like the kayfun. I think you will really love it.

 

[N0ks]

Alright well i'll go for Russian 91 and kayfun lite but there's a few things i dont understand.

This is the one on Canvape i'm about to order:
Russian 91% Clone Rebuildable Atomizer
I cant see who's the maufacturer, does anyone have a clue if they're good?

This is the one i've seen being reviewed on Youtube:
The Russian 91% v2 Rebuildable Atomizer - EVcigarettes.com
They look pretty identical

For the Kayfun, i'm seeing a few different versions im not sure which to pick. Most are made by EHPro and 1 by tobecco:
http://www.canvape.com/SearchResults.asp?Search=kayfun+lite&Submit=
What's the difference between a lite, lite plus and lite plus V2?

 

[brickfollett]

Not a rebuildable, but the kanger aerotank Mini is a fantastic tank. I'm a live and die RDA person, I use a Trident V2 on a Reo daily, and I have been nothing short of impressed by the Aerotank Mega and mini. I have both.

For the VV3, it wouldn't be a bad idea to try a squid RDA. but once you start dripping, you very quickly realize what you've been missing, and you'll be looking for more very shortly.

My perfect setup really did wind up being a modified Trident V2 and my Reo Grand. But dripping is what got me started on all that

Drippers really suck for out and about though. I definitely second the kayfun mini. I had an AGA-S for my wifes vision Spinner. Steer clear of that one. Pain to build, even more of a pain to get it to vape correctly, and leaks true to the genesis reputation. And I used an RSST exclusively for a few months when I had my Provari

 

[Shootist]

This KFL is small and will fit vv v3.

Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO

No need to go with a Mini anything. Every 510 or eGo cone thread atomizer will fit on a Innokin iTaste VV V3. And if you are running a coil below 1.4 ohms +/- the iTaste

 

[joesquid]

I would just get 2 of these.

Kayfun Lite Plus V2 Dual Airflow Clone by EHPro

Don't know if you're limited to canvapes but these are a great deal. Ehpro is one of the best clones out there so I would stick with them regardless. The Kayfuns and Russians are clones of each other depending on what version your talking about.

 

[steved5600]

I always recommend a dripper for the first Rebuildable. The one I would get would be the tobh. Easy to work with and holds a lot of juice. it has a deep well.
But for the next step I'd get a fogger v4 or aqua. Work better than the kayfuns and i have all versions of them.

 

[huntharley]

A little more than you are talking about but my first rebuildable was the nimbus clone and the russian 91, love both. the russian was especially nice on my vtr

 

[huntharley]

Drippers were by far the easiest for me to start building on, got a little frustrating at the start always dripping thats why I tried a russian 91, but was quickly back at the droppers so much more satisfying! Start with single coil builds and work your way up from there.

 

[wraithxiv]

From the research I have done, The kayfun lite plus v2 is the way to go for a good solid RBA thats easy to rebuild. Also I just order one from eciggity as my first RBA. I got the v2 with the larger air holes.

 

[N0ks]

Wow sorry, i didn't think there would be more replies. I ended up ordering the Russian 91%, the Kayfun Lite plus V2 by EHPro and an ohm checker. Ill probably buy a dripper down the road to use it to test juices sitting in my drawers, have yet to fill a tank with one i like, and it justs stays there in the tank. My favorite juice (Mapplebaco) gunks the coils very fast but i cant find an alternative exept for blueberry (second favorite).A dripper could be handy for that. Im not sure i'd use it a lot tho, i like the hassle-freeness of tanks.

@Wraithxiv, your avatar is awesome, FF VIII is one of my favorites games of all time.

Edit: @ joesquid, strange, i ordered the Lite plus V2 but its a bottom screw airflow control, yours seems to be an airflow ring. Didn't know they made those.

 

[DoubleWesternCheeseburger]

correct me if i'm wrong but i believe the russian 91 and the kayfun lite are essentially the same thing. i don't have a russian, but i do have a kayfun..

 

[N0ks]

From what i can understand they're both clones of the Kayfun Lite by Svoemesto but not replicas, as in they're not identical and each have their own features, differences in design. But don't quote me on that.

 

[Shootist]

Wow sorry, i didn't think there would be more replies. I ended up ordering the Russian 91%, the Kayfun Lite plus V2 by EHPro and an ohm checker. Ill probably buy a dripper down the road to use it to test juices sitting in my drawers, have yet to fill a tank with one i like, and it justs stays there in the tank. My favorite juice (Mapplebaco) gunks the coils very fast but i cant find an alternative exept for blueberry (second favorite).A dripper could be handy for that. Im not sure i'd use it a lot tho, i like the hassle-freeness of tanks.

@Wraithxiv, your avatar is awesome, FF VIII is one of my favorites games of all time.

Edit: @ joesquid, strange, i ordered the Lite plus V2 but its a bottom screw airflow control, yours seems to be an airflow ring. Didn't know they made those.

Don't feel bad about that. I have yet to find one juice that I can vape all day long, everyday. I do have one juice I use most of the time, Halo's Tribeca, but also mix it with other juices. I take at least 3 different devices with me most everywhere I go with 3 different flavors, mostly mixes of flavors, so I can switch between them during the day.

Juice taste is extremely subjective. What one person likes another hates. I have a cabinet full of juice I may never use.

 

[rawr]

Kayfun 3.1 or lite+ v2 quality clone.

 

[landoawd]

The one I would get would be the tobh. Easy to work with and holds a lot of juice.

My only complaint is the posts that allow the top to adjust airflow. It seems they could have offset them a bit to allow easier duals AND maintain airflow control. That said, it's what's next to me right now.