Refilling cartomizer--help?

Status
Not open for further replies.

oldlady

Senior Member
ECF Veteran
Nov 7, 2009
209
3
Charleston, SC
Could somebody help me, please?

My sister just followed the video on how to refill a kr808D-1 cartomizer. She says she added about 5 drops of liquid just inside the edge while holding the thing at a 45 degree angle, as shown on the YouTube video. When she tried to smoke it she got a mouthful of liquid and nothing.

I haven't gotten my juice yet. Has this ever happened to you? Any idea what she may be doing wrong?
 

Taryn

Ultra Member
ECF Veteran
Oct 21, 2009
2,142
19
Florida

frogbmth

Ultra Member
ECF Veteran
Feb 8, 2009
1,239
4
Dorset, UK
www.jantyclub.com
I would imagine tha cart is flooded to get a mouth full of liquid. The filler should look moist but not wet if that makes sense, and the hole down the middle should be clear. Blow gently through the threaded end of the cartomizer. If it gurgles it is flooded. It should have a clear air path.

Thats my idea of your problem. I could be wrong as usual :)
 

Shortstuff116

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2009
1,370
138
Bellingham, MA
I would imagine tha cart is flooded to get a mouth full of liquid. The filler should look moist but not wet if that makes sense, and the hole down the middle should be clear. Blow gently through the threaded end of the cartomizer. If it gurgles it is flooded. It should have a clear air path.

Thats my idea of your problem. I could be wrong as usual :)

That has been my exact experience also. When you refill the cartomizer, just put in enough drops to get the material good and damp, not soaking wet. Then with a tissue on a table or in your hand, turn the carto so it's pointing down at the tissue and lightly blow into the brass end that attaches to the battery. This will make sure that the center "tube" is clear of any fluid. Then take just a little bit of tissue or a Q-Tip and lightly clean any excess fluid out of the mouth end.

Then: Place the semi-clear stopper with the hole in the middle inside the mouth end. It has a flat-side which must face up (towards the mouth end), but I ony put it just inside the cartomizer and when I put the white cap on, I let the white cap push the semi-white stopper down at the same time. This makes sure that I don't over-insert the semi-transparent stopper too far inside at all.

Also, as with any atomizer, make sure you wait at least a minute between vapes. This will allow the atomizer to cool a bit, and will also allow the e-liquid time to "wick" back onto the atty for the next vape.

Hope this helps.

:thumb:
 

Lightgeoduck

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 7, 2009
5,699
180
50
jp(APO)Camp Z us
I would imagine tha cart is flooded to get a mouth full of liquid. The filler should look moist but not wet if that makes sense, and the hole down the middle should be clear. Blow gently through the threaded end of the cartomizer. If it gurgles it is flooded. It should have a clear air path.

Thats my idea of your problem. I could be wrong as usual :)
you could have hit the nail on the head, But another small possible is that you still have some residual liquid left on the inner walls and that is how you are getting liquid in the mouth. try waiting a bit before vaping a new refill by setting it battery side down on a paper towel and vaping another cart.

everyone has their methods even the trick of the day spinning the cartimizer over your head utilizing cirtrifical force to get that liquid down in there.... it may work( i just can't get myself to do it with out laughing)

anyway good luck

just don't get discouraged you'll get the hang of it and find your way
 

Taryn

Ultra Member
ECF Veteran
Oct 21, 2009
2,142
19
Florida
you could have hit the nail on the head, But another small possible is that you still have some residual liquid left on the inner walls and that is how you are getting liquid in the mouth. try waiting a bit before vaping a new refill by setting it battery side down on a paper towel and vaping another cart.

everyone has their methods even the trick of the day spinning the cartimizer over your head utilizing cirtrifical force to get that liquid down in there.... it may work( i just can't get myself to do it with out laughing)

anyway good luck

just don't get discouraged you'll get the hang of it and find your way

Awww, come on duckie! Jump on the spinning bandwagon! We are working out a theme song and a little dance to accompany it!

It's really not as goofy as it sounds, people are just having fun with it. And I don't twirl it over my head or in any real grand fashion. Just a spin to get the centrifugal force to help put that juice where it belongs. Its actually quite dignified and scientific!! ;)
 

Lightgeoduck

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 7, 2009
5,699
180
50
jp(APO)Camp Z us
Awww, come on duckie! Jump on the spinning bandwagon! We are working out a theme song and a little dance to accompany it!

It's really not as goofy as it sounds, people are just having fun with it. And I don't twirl it over my head or in any real grand fashion. Just a spin to get the centrifugal force to help put that juice where it belongs. Its actually quite dignified and scientific!! ;)

since you put it that way

Oh I found a tutorial

YouTube - Pen Spinning Stunts!!!!
 

Snarkyone

Super Member
ECF Veteran
Sep 4, 2009
818
5
59
Your mom said not to say...
While I get it's not always possible for maximum results when refilling let it sit for a few hours prior to using after refilling them to give the liquid plenty of time to seep into the material. It will extend the vaping time produced by the cart quite a bit. It always pays to gently blow through the end as stated by the others as well, although sometimes a shot of nicotine juice in the mouth can keep me away from the vaporizer for hours so I don't consider it to be too bad a thing, lol! Happy vaping and good choice in going with a 2pc model, they are much better in my opinion than the 3pc models, a lot more convenient, and a lot less hassles and mess, no modding required for great performance out of the box.
 

oldlady

Senior Member
ECF Veteran
Nov 7, 2009
209
3
Charleston, SC
Dear Snarkyone,

Thank you for your encouragement. I just got my kit two weeks ago.

I already prefer "vaping" to "smoking." In fact, the extra battery I ordered arrived day before yesterday, and yesterday was my first day of NO analogs. During my first week of "vaping," I would sometimes forget to keep one battery on the charger at all times! This helped me learn that real cigarettes taste terrible!

When first ordering a kit, I knew nothing about e-cigs. I just found the NHaler Website by chance. The description of the KR808D-1 seemed so user-friendly, I thought I'd give this a try.

The appeal for me was that

this is just as easy (actually more so) than real cigs.
it is way cheaper
it tastes better--flavors!

Then, on top of that, come the health benefits. . .

When I first discovered this, I am not sure I would have been up for the hassle involved in the care and keeping of three pieces--i.e., the automizer on top of the carts!

I LOVE that the carts are refillable. I think the cost incentive alone provides huge encouragement for smokers to switch!
 
Status
Not open for further replies.

Users who are viewing this thread