- Status
I found Joyetech 306 LR atties with drip tips for $3 a pop at Supreme Nicotine. Joye 510 LR or standards for $5 each.
They have a bunch of Joyetech products and Kanger cartos on clearance. 5/$5 on XXL Kanger horizontal coils was a steal IMO.
They have a bunch of Joyetech products and Kanger cartos on clearance. 5/$5 on XXL Kanger horizontal coils was a steal IMO.
Ive been thinking of trying the Kidney Puncher sealed 2ohm
KP Long Barrel Sealed Atomizer - Kidney Puncher
Ive heard they are great for the money. Eventually i would love a HH357 in 2ohm too
Is the draw on the Joye 306 a little easier than the Joye 510s? Ive got some 510s and the draw is just a little stiff.
KP Long Barrel Sealed Atomizer - Kidney Puncher
Ive heard they are great for the money. Eventually i would love a HH357 in 2ohm too
Is the draw on the Joye 306 a little easier than the Joye 510s? Ive got some 510s and the draw is just a little stiff.
I've been wanting to try dripping and this seems like the easiest way to go, I'm glad I found this thread! Can anyone help me pick an atty? I have a Provari 2.5 and a MVP2.
My MVP v2 is ok with a 510 LR atty but i wanted something a little better. The Joye 510 LR is 1.5ohm. 2ohm is probably better for the MVP and for the Provari for sure. IIRC the Provari needs a minimum of 2ohms so a 2.5 atty may even be better.
Both Kidney Puncher and Avid Vapor have 2.5ohm atties in 306, and 510 for under $10.
The HH357 from Avid Vapor is likely the best one out there but its about $20.
I used IO6 attys from Ikenvape for years then found Joyetech ones for $32 for ten bucks. When they stopped sellin' em I bought Leo drippers and build my own coils. Couldn't be happier, the same or better performance at a fraction of the cost (other than initial outlay for the drippers).
To begin, I would recommend either the Empire Mods' 510s (either 1.5Ω οr 1.8Ω) or Avid Vaper's Cisco Spec 510s (any resistance at 1.5Ω or above will be fine). Also, with the CS atties, you can get either bridged or no bridge. If wanting to try a bridged atty, go for the CS 510 atty from Avidvaper (I like the 1.5Ω), or if you want to try the bridgeless atty I would recommend the 1.8Ω 510 αtty Εmpire Mods. Any of those would be peferct for a Provarι and I vaped like that for a long time. If vaping on a 1.5Ω-1.8Ω 510 atty, you will want to keep your voltage between 3.7-3.9v where the1.5Ω attys should be kept at 3.7v. There a smidgen more wiggle room with the 1.8Ω.
The prices on the atties I recommend will be pretty good for entrance into 510 dripping.
I keep posting this, but apparently nobody is clicking on the link...
BULK 901 801 Joye 510 and 306 atomizers
I have well over 100 of their standard 510 atomizers, which they claim are genuine Joyetech.
I've had zero problems with them.
BULK 901 801 Joye 510 and 306 atomizers
I have well over 100 of their standard 510 atomizers, which they claim are genuine Joyetech.
I've had zero problems with them.
Supreme Nicotine is a local Saint Louis vendor that has been around for awhile. They are normally really high on pricing. Ive tried their juice and i am not impressed at all. The only thing i can really say for them is, they appear to sell only authentic products.
I tried to go into one of their B&Ms and they did not want to honor the online pricing. I did get some cartos for $1 each and one bottle of juice for mixing. That location did not seem to have any of the other items they have listed on clearance.
Last edited:
I ordered some of these when you posted awhile back. I did not have good luck with them. I guess I should have taken their advice to test them all when I received them, several didn't work right out of the box. Unpacking and testing 40 atomizers on arrival though seemed a daunting task.
Several more died within a couple days. Based on my own experience, the ones that make it a week are outliers but I'm glad you've had good luck with them.
Yes. Buying bulk atties and being told to test them all in a small time frame is just not going to happen. I think back in the day duds were less common then they are now (though still commonplace), but either which way, they are all-too-common now. Luckily I got enough proven-performers to last me.
p.s. Sometimes, just sometimes, atties that appear to be duds in the beginning can miraculously turn into great atties with prolonged usage, though it's not fun finding out which ones weren't truly duds.
Yep, I don't toss them until I've had a chance to try them out on another device. The V.K. atties I received were specifically prone to getting slightly pushed in by non floating pins and shorting. I learned to be REAL gentle with them when screwing em on, and I take them off to change drip tips. Seems to be helping.
Oddly, it seems 510's have a lot of variability in quality. The 306's I've bought from several different vendors however, all seem to have great life. Don't know enough about their builds, but I'm starting to wonder if I need to just stick to 306's, and of course my beloved 510 357's. Nice to see you, Mr. Mann. Going to have to do a coffee sometimes soon.
For sure, LLB.
I don't know what's going on with me these days, but no sooner than I say the Magma has been a game changer for me, I am right back to using my 510s on my assortment of Spinner/Twist-type devices. And what's even more crazy is my new fling with unflavored! The hit is just perfect. The taste is so pure. To me, this is perfect. Other devices and toys will always be able to amaze and intrigue, but few will ever (as far as I can imagine) be able to bring it home like this. Simple things. Yes.
I don't know what's going on with me these days, but no sooner than I say the Magma has been a game changer for me, I am right back to using my 510s on my assortment of Spinner/Twist-type devices. And what's even more crazy is my new fling with unflavored! The hit is just perfect. The taste is so pure. To me, this is perfect. Other devices and toys will always be able to amaze and intrigue, but few will ever (as far as I can imagine) be able to bring it home like this. Simple things. Yes.
- Status
Similar threads
- Locked
- Locked
