Reo/ bottom fed advice.

[JC Okie]

One more thing....make sure you cut an inverted "V" in the bottom of the tube so that it can't suction itself to the side or bottom of the bottle. Also, you know you'll need to squonk a little longer when your juice gets down to half a bottle or less. Maybe take the drip tip off and watch the juice come up so you'll have a feel for how long to squonk. For me, on every single squonk the juice washes over the wick and the entire coil.

Also, you will need to squonk as often as you would drip. I get maybe three good hits, max, on one squonk.

 

[B2L]

Hey Cool-breeze, just wondering if the advice helped and you've got it performing for you?

 

[jchisholm]

Way too much cotton.. Cut it back so both ends are hanging straight down and and just touching the deck. Less is definitely more when it comes to cotton and squonking, why try to pull your liquid through all that wick?


Sent from my Nexus 6 using Tapatalk

 

[jchisholm]

I had a similar issue when building with a parallel coil. Once I went to a simple, single coil build, the problem resolved.

28g, 2.5mm bit, 6 wraps and it's a whole new world.

Exactly what I settled on (after a lot of over-thinking it), go with a simple single coil and not too much wick and it'll light right up.

Sent from my Nexus 6 using Tapatalk