Reo Lounge Part V
- Thread starter pwheeler
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the warm welcome, All!
Sorry to hear about the critter, Justice! A friend of mine had critter problems in her garden...her hubby got a BB gun...one pop on the rear and that raccoon didn't come back! lol Hope the fence works!
Sent from my iPhone using Tapatalk
Sorry to hear about the critter, Justice! A friend of mine had critter problems in her garden...her hubby got a BB gun...one pop on the rear and that raccoon didn't come back! lol Hope the fence works!
Sent from my iPhone using Tapatalk
Oh I'm well armed for a Canadian
Problem is even my Pellet gun is louder than a .22 rifle Which makes me think Hmmm I do have a little .22 rifle seeing as its quieter than my airgun ya I dunno if its a good idea the airport real close to us does fire off propane cannons a lot so maybe people would think it was that 
Good Morning REOVille from Roxboro NC (north of Durham).
Have a Safe and Blessed Day
Have a Safe and Blessed Day
Hello All,
Yesterday T gave me some advice on building an ugly coil with 3mm RxW. Today I gave my mini a spa treatment in an ultrasonic cleaner, got it all nice and clean and proceeded to build my coil. As suggested I used a 7/64" drill bit and I put 4 wraps of 28 gauge Kanthal spaced about 1/8" (probably slightly less) apart and installed it in the atty (RM2). Came out to be a .9-1.0 ohm coil, which I decided I would use.
I had tried 30 gauge Kanthal, same coiling method and was up over 2 ohms, so I decided to stick with the lower ohm coil to give it a try. Next time I might try one extra wrap of the 28 gauge.
Anyway, threaded the 3mm RxW through it, (Thanks Tracey!!!!) and cut it to length. Filled a clean bottle with my favorite juice, put a fresh battery in and:
Mmmm, tastes good Now I just have to see if the carbon build up is minimal. That was a problem I was having with my micro coil (too much build up) with either cotton or 2mm RxW. Time will tell on this one So far so good. Certainly was quicker and easier than making a micro.
Again, Thanks T and Tracey. Your help made it happen.
Yesterday T gave me some advice on building an ugly coil with 3mm RxW. Today I gave my mini a spa treatment in an ultrasonic cleaner, got it all nice and clean and proceeded to build my coil. As suggested I used a 7/64" drill bit and I put 4 wraps of 28 gauge Kanthal spaced about 1/8" (probably slightly less) apart and installed it in the atty (RM2). Came out to be a .9-1.0 ohm coil, which I decided I would use.
I had tried 30 gauge Kanthal, same coiling method and was up over 2 ohms, so I decided to stick with the lower ohm coil to give it a try. Next time I might try one extra wrap of the 28 gauge.
Anyway, threaded the 3mm RxW through it, (Thanks Tracey!!!!) and cut it to length. Filled a clean bottle with my favorite juice, put a fresh battery in and:
Mmmm, tastes good
Now I just have to see if the carbon build up is minimal. That was a problem I was having with my micro coil (too much build up) with either cotton or 2mm RxW. Time will tell on this one So far so good. Certainly was quicker and easier than making a micro. Again, Thanks T and Tracey. Your help made it happen.
Mornin Papaw.....Fleet ......Scott and anyone else
Kewl fleet, hope you end up likin it.
I built the nuppin Doffy sent me a bit ago. It really chucks out the vapor, which I don't care so much about. It is a nice creamy vapor, so now when folks talk about that, I know what they mean now. lol But........not really getting any throat hit, which I desperately need!! So.... gonna check out the nuppin thread and see what I can find about how to get that done. Love the way it squonks and drains.....love the way you wick it......was a pita to build, but if you get a good one in there ya don't have to do that very often. Love most everything about it, but I need me some th
Kewl fleet, hope you end up likin it.
I built the nuppin Doffy sent me a bit ago. It really chucks out the vapor, which I don't care so much about. It is a nice creamy vapor, so now when folks talk about that, I know what they mean now. lol But........not really getting any throat hit, which I desperately need!! So.... gonna check out the nuppin thread and see what I can find about how to get that done. Love the way it squonks and drains.....love the way you wick it......was a pita to build, but if you get a good one in there ya don't have to do that very often. Love most everything about it, but I need me some th
Ok....Ok!! Soooooooo now am getting more TH on the nuppin. I'd been vaping it a few hrs when I posted the first post, now a couple more hours, and TH started picking up. Then I closed the air flow off a bit and got even more. Lookin forward to playing with this more and getting a better build on it.
Own that thing, Deb. Teach it who's boss! Make it bend to your will and deliver the vape you want.
The new to me classies black wrinkle was in the mail box today. Checked it for "the to much wobble" tell tale sign and sure enough the gasket was mangled. Stuffed in a new one, moved Blue's door, tube and bottle, and Rm2 over. Blue looks like his handsome self again go away OCD.
Got a bit of a nice bonus in that the door that came with it nicely matches one of my unused tips. A girl can't have to many options for dressing a Reo
go away OCD.Got a bit of a nice bonus in that the door that came with it nicely matches one of my unused tips. A girl can't have to many options for dressing a Reo
Whelp, sent my list of accessories and request for an LP Silver Vein with an SL door to Rob this morning around 9. Once I get the invoice from him I'll officially be on my way to REOville!!!
The new to me classies black wrinkle was in the mail box today. Checked it for "the to much wobble" tell tale sign and sure enough the gasket was mangled. Stuffed in a new one, moved Blue's door, tube and bottle, and Rm2 over. Blue looks like his handsome self again
Got a bit of a nice bonus in that the door that came with it nicely matches one of my unused tips. A girl can't have to many options for dressing a Reo
You can dress your Reo anyway you want, just don't try and dress me
Ah, the anticipation
Wonderful thing to have Reo vapemail. And, you *are* in Reoville To me (many/all?) if you're even just interested in Reos, or you just like the people (Reonauts) here, well..... You're welcome to be here!For those who just like the people, bet a large percentage of you end up with Reos
Got a ways to go for that, I'm still waiting on the invoice Take my money pleasedems the only thing worse than the wait for your first Reo is waiting on the second, third, 12th ect, because then you know first hand what's coming in that box.
I'm sure it will wind up just like you say though, lol
The new to me classies black wrinkle was in the mail box today. Checked it for "the to much wobble" tell tale sign and sure enough the gasket was mangled. Stuffed in a new one, moved Blue's door, tube and bottle, and Rm2 over. Blue looks like his handsome self again
Got a bit of a nice bonus in that the door that came with it nicely matches one of my unused tips. A girl can't have to many options for dressing a Reo
You know the rules. Pics, or it didn't happen.
If you sent a request by email you might want to contact him by PM on here. Make sure he got the email. PM's are the fastest way to let him know.
I sent the list in a reply to an email from him telling me to send a list, hehe. I'm sure he got busy or something though, but the wait is hard when you are this excited for something, oh garsh so excited
- Status
