Resin mods

[Robinowitz]

Hoping for a tie dye one!

I know this is all speculation but do we have any ideas about size, battery size, etc.?

(Just doing my part and reminding Rob about his "priorities."

 

[Train2]

The last we heard, they were going to be physically identical to the last Woodvilles - same shape, size, hardware, etc.

Hoping for a tie dye one!

I know this is all speculation but do we have any ideas about size, battery size, etc.?

(Just doing my part and reminding Rob about his "priorities."

 

[Debadoo]

Hoping for a tie dye one!

Jup, that would be amazing!! with lots of purple in it!!

 

[misswish1]

The last we heard, they were going to be physically identical to the last Woodvilles - same shape, size, hardware, etc.

Wonder if they will be as tough as the metals? Price range?

 

[M4rtin]

Yes please, lovin both my LP hammertones, really looking forward to seeing the resin.

 

[unsure]

I'm sure most can hardly wait but it will be a big job in which Rob will want to make plenty so everyone who wants one can get one and that can take a long time. It'll be worth the wait. In the mean time I anguish to see what my Woodvil will look like when it returns from the spa.

 

[jifjifjif]

Exactly, Gil. It may be a while, but at least we have new Woodvils to keep us content until the resins are ready. I still haven't gotten over the initial wow factor of the Woodvils. I gaze t it lovingly.

 

[kkiet]

I am sure rhe resins will be awesome.

 

[mwdenko]

Exactly, Gil. It may be a while, but at least we have new Woodvils to keep us content until the resins are ready. I still haven't gotten over the initial wow factor of the Woodvils. I gaze t it lovingly.

Well that only counts if you have a Woodvil keeping you content. I do not and require a Resin post haste. lol.

 

[jifjifjif]

I hear that too, denko. You definitely deserve a resin.

 

[mommabird62]

Hoping that he will be able to make some of these with plunger doors [emoji2]


Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[unsure]

Well that only counts if you have a Woodvil keeping you content. I do not and require a Resin post haste. lol.

I understand. I had my one and only for less than a month and made the decision to send to the spa for some special treatment so I can relate with being without.

 

[redeyedancer]

I haven't forgot the resin mods I still need to do more testing before I jump in to deep . Were finishing up the brass patina mods and I will work on the resin mods and let you no my findings .

I wont be doing large runs of any mods in the future . I just did a large run of mini mods and didn't sell enough to even cover the cost of the materials .
I still have 50 wood mods on the site times are changing folks . I have to be a little more careful about what I do and how many I produce .

MY company is down to 3 guys including me .

I am going to be down for a little while shortly I have to have a couple surgeries . I have two hernias that I have putt off for long enough

 

[unsure]

Health before business my friend.

 

[mwdenko]

Take care Rob.

 

[Papa_Lazarou]

I haven't forgot the resin mods I still need to do more testing before I jump in to deep . Were finishing up the brass patina mods and I will work on the resin mods and let you no my findings .

I wont be doing large runs of any mods in the future . I just did a large run of mini mods and didn't sell enough to even cover the cost of the materials .
I still have 50 wood mods on the site times are changing folks . I have to be a little more careful about what I do and how many I produce .

MY company is down to 3 guys including me .

I am going to be down for a little while shortly I have to have a couple surgeries . I have two hernias that I have putt off for long enough

So you literally busted a gut for us. We salute you, sir, but do take the time to get it all fixed up. We shall be waiting (im)patiently, with visions of resin mods in our heads. Health and family first, always.

 

[SteamStack]

Take care of yourself rob! Atleast there's alot of mods on the site for people to buy while your away getting stuff takin care of.

Works out fine for me as it gives my wife time to get over my last few reo purchases hehe.

I know if there's a way I'll be down for 2-3 resins hehe.

Woods are awesome enough to hold me over!! Built strong and even had a couple of accidents with 2 of them falling on my hard tile floor.. about a 3 foot drop and not a single mark!

Was oiling up the 3 woods.. was all done with the last propped up on my ohm meter while it was soaking. Went to close the lid on the howards bottle on the table and stupidly wasn't holding the bottle and it fell over and knocked the most precious wood on the floor.. the (whatever the wood is called.. boygina?) Mod shown in your wood mantiance video, shot right to the floor and the brass button flew off and the oak wood as well and the door from the zebra! I freaked out!

Could not find a single ding, scratch,scuff or crack.. thought for sure there would be a crack. Crazy.

Then just last night my hand just let go of the oak mod while reading on the phone and it landed on the same hard floor.. and not a mark! Haha.. nuts that it even happend but it shows you there awesome!

 

[smiddlet68]

yes, for sure, take care of yourself Rob. its not like we dont all own 2+ mods that will last forever and require little maintenance.

I as well went down for surgery and it curbed the hell outta my vape budget.. but for some reason im still content put one of those woods in a shoebox, after i get these doctors paid up ill come get it..lol

By the way rob.. you will get lots of time to practice the guitar.

 

[Robfisher]

Take care Rob! Hopefully it's key hole hernia surgery... been there done that and got the T-Shirt... wasn't half as bad as I expected it to be!

PS My shiny brass Mini is causing a stir here on the southern tip of Africa. ;-)

 

[mommabird62]

I haven't forgot the resin mods I still need to do more testing before I jump in to deep . Were finishing up the brass patina mods and I will work on the resin mods and let you no my findings .

I wont be doing large runs of any mods in the future . I just did a large run of mini mods and didn't sell enough to even cover the cost of the materials .
I still have 50 wood mods on the site times are changing folks . I have to be a little more careful about what I do and how many I produce .

MY company is down to 3 guys including me .

I am going to be down for a little while shortly I have to have a couple surgeries . I have two hernias that I have putt off for long enough

Hopefully things will pick up for you after summer. Lots of peeps are vacationing etc., and not as much buying going on. Hubby is self employed and sees a little bit of a slow down every summer.

Please listen to your surgeon and take it easy! Hoping that your recovery goes well. [emoji1]


Sent from my iPhone using Tapatalk with my paws

Mommabird62