Resistance

[Feeq]

Hello fellow vapers,
Would like to ask as to why does my resistance keeps jumping up and down? I mean when i vape @60-80 watts its at 0.67 ohms and above 100 watts its at 0.79 ohms.. anyone knows about it? Is it normal for resistance to have some slight changes?

 

[taps41]

Most likely is u didn't secure ur coils tight enough. Wat mod u using? Wat atty u using?

Sent from my SM-N910G using Tapatalk

 

[R_u_mine]

Check the screws that are holding the coils

 

[Comrade Vape]

I thought this was a thread about bringing local underground vaping to another level.

 

[isux]

I thought this was a thread about bringing local underground vaping to another level. [emoji14]

Haha me too. like rallying for a strong army to fight against the gahmen, with varying preferences to our weapons of choice. [emoji28]

@Feeq, most likely it's your screws loose. tighten them up and you should be fine.

Sent from vapour clouds above

 

[KenshinAdryan]

La resistance! Understand that some mods can lock the resistance level. Atty also can be the cause... The resistance may change if screwed out and in again..

 

[Feeq]

Ahh i see.. but well i tighten them all tightly ..scared if too tight may lose the grip of the slot do i actually have to keep checking the tightness of screws time to time?

 

[Feeq]

@Comrade Vape @isux not like that la hahahahaha im in no position to lead even !

 

[KenshinAdryan]

Bro if u lead such resistance not only HiShAm will find you.. his twin brother IrSyaD will find u first...
Btw what atty are u using.. some atty nuts when tie to much will wear out the thread.. worse when u have no spare..

 

[Feeq]

Bro if u lead such resistance not only HiShAm will find you.. his twin brother IrSyaD will find u first...
Btw what atty are u using.. some atty nuts when tie to much will wear out the thread.. worse when u have no spare..

Hahaha naah i like to live peacefully with no disturbance
Im using hellboy rda

 

[Attyca]

What mod you using? Is this in TC mode? Some mods will show u realtime resistance of coils in TC mode, explaining the resistance jumps.

 

[Feeq]

What mod you using? Is this in TC mode? Some mods will show u realtime resistance of coils in TC mode, explaining the resistance jumps.

Using the smok x cube 2 and using watts.. the jumps arent so frequent but still idk might be something to worry about

 

[isux]

hmm. I don't know what atomiser you are using, this is what I'll normally check for if this happens to me:
1) surface of coil - looks worn and rough? --> change. metal lattice might have already deformed and alter the resistance. otherwise, change to different brand of metal coil (might be a batch problem) if this happens consistently. I see that you're running about 6v to 9v across your coils, might be material stress (depends on the type of metal you're using)
2) connections / contact points (510 connection and screws and posts) loose? plays a huge part in ohm variation
3) coils in contact with anything other than the ends in contact with the post? usually I will end up clipping stray ends or finding coils touch the walls of the rba.



Sent from vapour clouds above

 

[oscia]

Read somewhere that when the coil is heated, resistance will go up. So far my X Cube II has not given me such changes in resistance even when I don't lock my resistance. If you running on kanthal, just give a check to your screws again.

 

[plumeofred]

0.67 ohms and you hitting it at 80 watts?! Crazy sia bro. That is quite extreme. Usually if you wanna hit 80-100+ watts your coils should be built at a lower ohm. Use thicker wires or make triple/quad coils. Bad things start happening when you go to the limits of the metal.

 

[Feeq]

0.67 ohms and you hitting it at 80 watts?! Crazy sia bro. That is quite extreme. Usually if you wanna hit 80-100+ watts your coils should be built at a lower ohm. Use thicker wires or make triple/quad coils. Bad things start happening when you go to the limits of the metal.

Haha i see. I just want to try experimenting myself bad things like?

 

[plumeofred]

Haha i see. I just want to try experimenting myself bad things like?

Actually it's not the metal. It's more of the VG in your juice. If you heat it too hot it will create acrolein. It starts appearing if you heat VG at a temp of about 300C. Acrolein is toxic and will irritate your throat.

 

[Feeq]

Actually it's not the metal. It's more of the VG in your juice. If you heat it too hot it will create acrolein. It starts appearing if you heat VG at a temp of about 300C. Acrolein is toxic and will irritate your throat.

But thats at temp control right?

 

[Karstine]

Hello fellow vapers,
Would like to ask as to why does my resistance keeps jumping up and down? I mean when i vape @60-80 watts its at 0.67 ohms and above 100 watts its at 0.79 ohms.. anyone knows about it? Is it normal for resistance to have some slight changes?

All metal wire resistance change with heat. If you are using super high wattage, better to be using a lower sub ohm.

Trying lowering your wattage and vaping and check whether your resistance still change by a lot.

Try vaping in super cold aircon might help haha

 

[Feeq]

Sg so hard to

All metal wire resistance change with heat. If you are using super high wattage, better to be using a lower sub ohm.

Trying lowering your wattage and vaping and check whether your resistance still change by a lot.

Try vaping in super cold aircon might help haha

Sg so exp to get aircon i once tried a parallel coil build @0.26 ohms, tried to vape 70 watts but then they say battery low
But my battery was still about half