RM 7 (yep, 7)

[SteamStack]

Hmmm.. just a quick thought. I bet one could sand or file the top of the center post so the screw would go further down to secure the wire.

Obviously would be easier to find a screw around the house but if one was to buy a new screw get stainless steel screws.

 

[Rule62]

Is that including the thread base or just the or just the atty Rule?

That's the base to top of the cap; no threads.

 

[Fuzzy Bruce]

Having had problems with screws on other clones, I have been swapping the screw with grub screws. Not sure of the size because I have a boatload of grubs from my RC model building days and just find one that works.

 

[TS12000]

Got the post swung back around and replaced the center screw with a hex from an rm5 and it seems to be doing much better.

 

[pennysmalls]

Err...I went to Rob's profile page to send him a pm about this RM7 and I can't figure out how to pm him lol! Everything has changed so much! Help? Where in the heck is the pm button on people's profile pages?

 

[Train2]

Click on his name from any post he's made, then look for "Start a Conversation".

There are other ways, but that works...

Err...I went to Rob's profile page to send him a pm about this RM7 and I can't figure out how to pm him lol! Everything has changed so much! Help? Where in the heck is the pm button on people's profile pages?

 

[pennysmalls]

Thanks Train! Weird that pms are viewable by the public now.

 

[Rule62]

Thanks Train! Weird that pms are viewable by the public now.

So, they're not really PMs. They're just Ms.

 

[pennysmalls]

No, their still pm's. Public messages.

 

[Mrs C]

Conversations started from your inbox aren't visible to the public only the participants. Click on inbox on the right side at the top of any page then start a conversation. They only come up in searches for the participants.

 

[pennysmalls]

Ah, thanks Mrs. C. I thought it odd that there was no option for a private message to someone. I need to sit down and mess around and figure out this new stuff.

 

[Jet Knight]

Looks rogueish to me!!
Good pick, I think for a new RM model...

Really lovin this atty from Rob! Had to order a couple more.

 

[Mrs C]

It's just a new name on the same function.

 

[Squonkysquonkster]

I just got my rm7 today, to be honest im a little disappointed. The screws are way too short and of poor quality and the o rings are too thin and loose, a bit of dental floss helped but ill need to search for proper screws now to get this thing to work. I really wanted to like this atty. I understand its a clone, just very poorly made. :'(

 

[Rule62]

I just got my rm7 today, to be honest im a little disappointed. The screws are way too short and of poor quality and the o rings are too thin and loose, a bit of dental floss helped but ill need to search for proper screws now to get this thing to work. I really wanted to like this atty. I understand its a clone, just very poorly made. :'(

It's definitely not the most well made clone I've ever seen. The screws are terrible, and the o ring seals on the top, for the AFC ring, are too loose. But performance wise, I liked the design well enough to order an authentic, which should be here tomorrow.

 

[LR40K]

My screws are horrible but work but the center post spins with the slightest breeze. I was even extra careful building the first time after seeing others with the issue. Nope, second build it spins like Pat and Vanna are in the background urging it on. Can't get a stable ohm reading on three different meters.

 

[SteamStack]

Where are people putting there coils on this one?? Cant seem to find the sweet spot. Trying to build it the same as the derringer with 30 gage wire with 7 wraps 2.5 pole on the coilmaster.. comes out to 1ohm for dual coil. Tried fully opened and fully closed. Coil near the top and coil normal and then even moved the coils in more near the center post.

I'm thinking I need to drop ohm and go bigger wire to get the same volume or heat.

 

[Squonkysquonkster]

Where are people putting there coils on this one?? Cant seem to find the sweet spot. Trying to build it the same as the derringer with 30 gage wire with 7 wraps 2.5 pole on the coilmaster.. comes out to 1ohm for dual coil. Tried fully opened and fully closed. Coil near the top and coil normal and then even moved the coils in more near the center post.

I'm thinking I need to drop ohm and go bigger wire to get the same volume or heat.

Center of the wells and out to the edge, about 3/4 way up the center post in height. I need to put ss screws in mine i think...using plumers tape for the oring problem, good build in it now, leaving it alone lol...

 

[Rule62]

Where are people putting there coils on this one?? Cant seem to find the sweet spot. Trying to build it the same as the derringer with 30 gage wire with 7 wraps 2.5 pole on the coilmaster.. comes out to 1ohm for dual coil. Tried fully opened and fully closed. Coil near the top and coil normal and then even moved the coils in more near the center post.

I'm thinking I need to drop ohm and go bigger wire to get the same volume or heat.

Mine is built with 7/8 wrap 26g kanthal on 2.0mm pole. Dual coils. About .43 ohms. Coil height is important. Measure the inside of the cap, from bottom to the underside of the top, where the air inlets are, and set your coils so the tops of the coils are 1 1/2 to 2mm below that. You have to play with the height, but I like mine as close to the air inlets as I can safely get them.

 

[redeyedancer]

Anyone having a problem with there atomizer my email is reo@reosmods.com . I will refund your money if there is a problem . Keep in mind these are not $100 atomizers . I will look into the screws on these mods if there not up to the task I will get some that are and replace them no charge to the customer