Hey guys. I just bought a rsst rba tank. Using it on my evic. Wrapped coil so its at 2.1 ohms, ss mesh wick. Using 60vg/40pg. Is there anyway i can get the nice clouds im getting and still get a decent throat hit. I usually run it at 11 watts. 1 more question. Can someone tell me the best way to hit rbas
- Status
Drilling out the airhole made a big difference for me.. thought mine is a bit airy now. I went straight to 1/16", so I'd suggest starting smaller and working your way up. I just didn't have a smaller drill bit at the time. You can buy replacement caps as well if you screw it up.
I love the RSSTs. I have several. I drill the air holes to 1.2mm. That's perfect, for me.
If I'm using them on a vv or vw mod, I like to build the coils somewhere around 1.5 ohms. This resistance allows for plenty of adjustment of the voltage or wattage, without erroring out. I use 30ga kanthal. IMO, RSSTs like to be pushed. I don't know the watt limit on an Evic, but with a Provari, I usually vape at 14-14.5 watts; which works out to around 4.6 volts.
On a mechanical mod, I set up with 28ga kanthal. .8 or .9 ohms.
If I'm using them on a vv or vw mod, I like to build the coils somewhere around 1.5 ohms. This resistance allows for plenty of adjustment of the voltage or wattage, without erroring out. I use 30ga kanthal. IMO, RSSTs like to be pushed. I don't know the watt limit on an Evic, but with a Provari, I usually vape at 14-14.5 watts; which works out to around 4.6 volts.
On a mechanical mod, I set up with 28ga kanthal. .8 or .9 ohms.
- Status
Similar threads
- Locked
