- Status
I've never used one, so my opinion may not carry much weight. But from what I've read, a Buzz Pro may be a better choice.
Yeah, I'm a Buzz fan.
Yeah, I'm a Buzz fan.
Most people seem pretty happy with them, I've never used one. The only quibble I've noticed is some say your finger must be moist for the touch sensor to work properly.
I have a Sabertouch VV w/HP option. It puts out 5amps. It will vaporize your lips off your face with all the power! I say this in jest, but to emphasize the power it packs. It hits harder than any PV I know of, hands down.
Your body's chemistry may cause issue with the touch switch. Also, I have misfired my ST by laying in on a moist surface. Using a ST in the rain without protection is a no-no, as well.
Your body's chemistry may cause issue with the touch switch. Also, I have misfired my ST by laying in on a moist surface. Using a ST in the rain without protection is a no-no, as well.
I like mine better than the buzz pro i had.I don't change voltage alot,so the screw vs wheel adjustment ain't a big deal.
Never have any problems with misfires,but you gotta keep yer finger of the touchpad if yer not vaping,it fires easy
Never have any problems with misfires,but you gotta keep yer finger of the touchpad if yer not vaping,it fires easy
Thanks for the replies so far folks... any and all information on the ST VariVolt is much appreciated... 
@ Dougiestyle & aziffel
Any info or recommendations on batteries in particular would be a great help...
@ Dougiestyle & aziffel
Any info or recommendations on batteries in particular would be a great help...
I have ordered a Saber VV today, will be able to compare it against the Infinity Pro. I really like the IP, all except the long 510 connection that makes in ungainly with a tank. Didn't think of this issue until after I had the IP. And I am a full time nothing else carto tank user. I've order 2 mods the Saber VV for at home, and one of the smaller Precise+ for when I out and about. Both of these have recessed 510 connections that make a more seamless transition to a tank. Then again I might find I prefer the IP even with the awkwardness with a tank. The IP has the perfect form factor for someone who likes cartos without tanks or the slender atomizers that are the same diameter as the extension on the end of the IP. The other notcigs mod, Buzz Pro looks better with a tank, probably should have order one of those instead of the IP at the time I was only thinking of the extra $30 price difference.
i got my VV/HP Saber 3 days ago the tube is poweder coated in black ice. the high power option eliminates the problems of not firing uneless your hands are bone dry. I can fire mine with out having to touch the end caps. Should you have any problems just call or e mail Sir Lawerence he will gladly solve any issues you are having . Ithink you are gonna love your new Saber.
I was checking out the VaporMoon site last night and came to realize that the Saber Touch VV with the "High Power" option is the only vv tube mod that isn't limited to 2-3 amps. As Dougiestyle pointed out, the Saber Touch cranks out a whopping 5 amps and won't shut down when using DCC's or LR atomizers. I'm going to buy a high end mod with my tax return $$$. I was going to buy a Provari, Buzz Pro or even a Precise Plus 18650. I would also consider a Darwin if you they were ever available. Now I have to think long and hard before I make a decision. I wish I could afford them all!
i love my saber touch hp and pass through this thing will knock you socks off i have a ipro and a buzzpro lt and provair and some diff vvmodboxes and this thing is crazy it will handle anything you throw at and laugh when i first got mine i put a lr atty on it and put some drops in it and holy cow it whoops other vv in a lot of ways but the screw is a lil rough to get used to and i have lick my finger to get mine to fire on cold days but the saber is tough really tough i have put it through some stuff droped a ton and have never had a problem with it its my go to vape you will be happy if you dont mind the screw to change the voltage i set mine and leave it
Yeah my Saber touch VV is coming in Thunder Textra Thunder Blue, nickle plated turned caps, LE turned racing stripes, and of course the high power option. I really like the idea of the textured powder coat. And I love blue, should go good with my blue anodized Buzz tanks.
Not sure why someone wouldn't get the HP option, after spending around $150 it seems petty not to spend the extra $7.
If you order one don't forget the discount code "contest1" that saves 10%. Enough to pay for the stripes and the HP option.
Not sure why someone wouldn't get the HP option, after spending around $150 it seems petty not to spend the extra $7.
If you order one don't forget the discount code "contest1" that saves 10%. Enough to pay for the stripes and the HP option.
Am I reading this right that 18350 imr fit in the sabre touch? Does the cap screw on tightly? I've been on the hunt for a vv tube that fits 18350 and if this does it will be my next mod
Yeah that black really looks good too, and the stripes make all the difference in the world. I find it hard to believe that the stripes are really "Limited edition" people are going to continue to demand them.
If the 18350's fit I'll be sorta irritated because I will have just ordered different batteries (16340's for the saber) that I don't need, I already ordered 18350's for my Precise+. Although it would be nice if they could use the same batteries.
They are different diameter I believe
I would think the 18350s will fit from a diameter point of view... as the 3.7/6v option takes 18650s, so has an internal diameter large enough to accommodate 18mm batteries... The difficulty will be in the length, if anything...
Yes,they fit,but i'm not recommending 18350's for full time use,I only use them when my 16340's or ICR 123's are not available
Looks like I'm going to be ordering a new Saber Touch VV with the HP option. Can anyone tell me what the turn around time is when you place an order from Vapor Moon?
- Status
