Same amount of vapor

[SammyKablammy]

So idk if it's just me or if my eyes are deceiving me but when I build on my rda weather it's .25 to .6 ohms it all seems like it's the same amount of vapor . Only difference is one is warmer than the other. Do you think I'm doing something wrong with wicking? I've tried different methods of wicking by putting less and more, how tight or loose it is. Maybe I'm just trippin? Idk..


Sent from my iPhone using Tapatalk

 

[Susan~S]

Which rda are you using?

 

[JoeMySwords]

I'm going to ask the same question as Susan: What RDA are you using? Also, are your post screws screwed all the way to make sufficient contact with the wires?Are using a fresh battery? What's your juice ratio? We'l need some details before we can pinpoint the problem.

 

[Completely Average]

The coil is only part of the equation. The other parts are the size of the chamber and the amount of air flowing through it. If the chamber is small or airflow restricted then the amount of vapor you can produce will be limited regardless of the coil build. You've got to have good airflow to produce a lot of vapor.


Which brings us to the question others have asked.... what RDA are you using?

 

[dbrandt01]

For me, I have an igo w4, stock air holes I was getting NOTHING. Today I drilled them out to 5/64 and WOW! Its the world of difference.

For me though, on my TOBH, the biggest different that was made when I went to 100% VG juice.

 

[JoeMySwords]

For me, I have an igo w4, stock air holes I was getting NOTHING. Today I drilled them out to 5/64 and WOW! Its the world of difference.

For me though, on my TOBH, the biggest different that was made when I went to 100% VG juice.

Same exact thing I did. Started out with the W4, and without even trying it with stock holes I moved up to 1/16, and increased until I found the right size. I have a TOBH too, airflow on that is amazing. Honestly, just about everything about the TOBH is awesome.

 

[SammyKablammy]

Sorry I forgot to put that in the post. I'm using a patriot RDA with 1/8th air holes 50/50 juice from MBV hawk sauce. And a heimdall clone


Sent from my iPhone using Tapatalk

 

[SammyKablammy]

Yes fresh battery off the charger, I checked the screws to make sure they were down tight


Sent from my iPhone using Tapatalk

 

[JoeMySwords]

Sorry I forgot to put that in the post. I'm using a patriot RDA with 1/8th air holes 50/50 juice from MBV hawk sauce. And a heimdall clone


Sent from my iPhone using Tapatalk

Check that the screws aren't backing out a bit after you set it up, that might be part of the problem. Also, you can only get so much vapor production using a 50/50 blend, try using something with more VG and see how it compares between the two resistances, it should be much more noticeable.

 

[SammyKablammy]

I'm also using sont vtc5 batteries


Sent from my iPhone using Tapatalk

 

[SammyKablammy]

Alright I'll pick up some juice with more VG , is that about the only thing I can do? Thanks a lot , really appreciate it


Sent from my iPhone using Tapatalk

 

[realsis]

You can drill out the air flow holes to increase air flow and vapor. You can use a dremmel to do this. Hope this helps.

 

[JoeMySwords]

You can drill out the air flow holes to increase air flow and vapor. You can use a dremmel to do this. Hope this helps.

He already has them drilled out to 1/8 inch, which should be about the right size he'd want for a coil of that resistance.