Screwdriver-E-NI MKII Battery size

[Mark1]

Could someone tell me what size Battery to order from mad vapes for my Screwdriver-E-NI MKII.

I tried the 18350 it was a little long but worked, But my attys are burning up. 3 in two weeks.

Thanks for your time !!!

 

[elcheapo]

I thought the 18350 was the correct battery.

does your screwdriver act like it is turning on and off correctly ??
or does it act like it is still vaping after you release the button ??

I have heard that if the thin plastic on the bottom corner gets torn, the battery can engage even if the button is not pushed

 

[Mark1]

I'm not able to thread the two half's together all the way, still about 3/16" of threads left. It turns on and off alright, but the attys are not lasting but 3 to 5 days. I checked all the batteries plastic coverings and they look good (thanks for the tip).

 

[elcheapo]

in 3 to 5 days are the attys completely failing, or are they getting very weak ?

 

[Mark1]

One quit 2 are very weak.

Thanks for your help !!!

 

[Mark1]

Tried cleaning them, still the same.

 

[Mark1]

I converted my Screwdriver from it's original 901 atty to a 510 atty. Works great for 3 to 5 days, but then the vape slowly goes down to almost nothing.

 

[Xanax]

Uses 18350 but not all 18350s work. You will need to buy a different charger for whatever new 18350 you get. Preferrably a universal charger, madvapes has them. The charger that comes with the screwdriver will not work. Good luck!

 

[Xanax]

Adapters go bad btw. They don't last forever. Same goes for atomizers too. It's probably your attys and not your screwdiver. Do some troubleshooting.

 

[Mo JJC]

Could someone tell me what size Battery to order from Mad Vapes for my Screwdriver-E-NI MKII.

I tried the 18350 it was a little long but worked, But my attys are burning up. 3 in two weeks.

Thanks for your time !!!

I had the same problem. I burned up my original atty in a day and figured it was old. I had 3 slightly used attys, I had just checked them to make sure they worked and put them away. I burned out 2 of them in a week before I ordered new batts from TW. that was a month ago and its still working.

 

[Mark1]

Thanks Xanax, Lot of good information there. I tried a different adapter, that did not help.
I did pick up the universal charger from madvapes and the 18350 batteries also the 510 atomizers. I guess they don't have the right batteries for the MKII. But they work just not the right size. Maybe I got a bad batch of 510 atomizers ? Should I try a different brand of 510 atomizers (Bauway) maybe ? Thanks for your time !!!

 

[Mark1]

Hi Mo JJC, Is your battery from TW a 18350 ?

 

[elcheapo]

what e-liquid are you vaping?
I think some liquids clog attys more than others

 

[Mark1]

I'm vaping again with a Titan 510 atty from Totally Wicked. I make my own juice elcheapo, If this atty dose not last I will try one of their batteries. Thanks for all your help guys !

 

[Mo JJC]

Hi Mo JJC, Is your battery from TW a 18350 ?

It is. ICR18350
I used this link to choose Mad vapes MVLBAT18350.1200 Protected 18350 Lithium Ion Battery

$5.79​

http://www.e-cigarette-forum.com/forum/new-members-forum/94518-screwdriver-mkii-battery.html


But ened up going back. Here is the discount link for TotallyWicked. A discount of 7.5% should be automatically supplied. some other stuff is 30% off until sept 1

Discount: 7.5%

=$9.24

 

[Mark1]

Thanks for the discount link and the battery number Mo JJC

I think i might have had my battery (from Mad Vapes) in backwards, I now have the positive pointing at the atty. It works both ways but it might make a difference, I don't know. Still vapen.

 

[Ironlion]

For keeping your stuff in the best shape, I wouldn't switch from the battery specified from the manufacturer, especially since the battery life and quality is actually one of the really strong points of the SD.

 

[prof beard]

I use these batteries in my Mk2 with the originally supplied charger:

http://www.kaidomain.com/ProductDetails.aspx?ProductId=5319