hmmm I was wondering how to mark carts. I had one that I filled with hopscotch and accidently took that when I thought I had my favorite tobacco. That was bad.....really bad.
Just ordered my screwdriver
- Thread starter mudboy
- Start date
- th_trl_thread_readers 0
- Status
Ouch.
Mint and CoffeX. Also bad.
You can possibly also find little hair bands that are the right size. You're looking for 3/8th's of an inch or smaller.
Welcome to the obsession.
Well it came, it saw and it conquered. I however not got my 2 ohm cartos in so i've just been using the cart/attys. The 901 attys are measuring out at 3.6 ohms and the 510s are measuring out at 2.3 ohms. I'm liking the 510s more I believe due to this difference. battery is 3.89v before and after switch activation. so with the 510 I'm at 6.579W and with the 901 I'm at 4.203W. Compared to my old EGO where I would be at 4.735W. With the 2 ohm setup I will be at 7.566W which I cannot say how this is due to the fact I don't have them cartos yet. If you are looking for a great hit. that 6.6 Watt area is the place to be from what I can tell. The taste is still way better and stronger than i could ever get from my EGO along with the hit is just plain awesome.
I ordered it Friday and it came Monday from Totally Wicked, so I give props to them. Even though people call this a mod, it is no harder to use than a regular e-cig. The batteries that come with it however I'm not sure if they are up to par. The 510 setup on the SD calls for 1.61 Amps. The batteries that come with it are 900MAH Moetcell ICR 18350s which have a charge current of .5C and a discharge curret of 1C. I'm guessing the "discharge current" is the actual C rating to go by. I believ to have a 100% successful setup I would need at least a 2C battery. Now the spare batteries that I bought are 900 MAH DKL ICR18350s are what appear(searched internet) to be identical to the Moetcells. I guess to make the perfect setup I need some Ultrafire 1200MAHs will make me complete. To narrow it down I had a regular 510 and got tired of batteries every 2 hours so I bought an EGO kit, the batteries lasted plenty long but I got tired of weak hits. I was going to run LR attys or cartomizers but didn't want to kill the batteries., So i stepped up to the Screwdriver MKII and found what I was looking for. This will now be preference to people looking to get into vaping. I owe it to ECF!!!! thanks guys/gals/mistress
I ordered it Friday and it came Monday from Totally Wicked, so I give props to them. Even though people call this a mod, it is no harder to use than a regular e-cig. The batteries that come with it however I'm not sure if they are up to par. The 510 setup on the SD calls for 1.61 Amps. The batteries that come with it are 900MAH Moetcell ICR 18350s which have a charge current of .5C and a discharge curret of 1C. I'm guessing the "discharge current" is the actual C rating to go by. I believ to have a 100% successful setup I would need at least a 2C battery. Now the spare batteries that I bought are 900 MAH DKL ICR18350s are what appear(searched internet) to be identical to the Moetcells. I guess to make the perfect setup I need some Ultrafire 1200MAHs will make me complete. To narrow it down I had a regular 510 and got tired of batteries every 2 hours so I bought an EGO kit, the batteries lasted plenty long but I got tired of weak hits. I was going to run LR attys or cartomizers but didn't want to kill the batteries., So i stepped up to the Screwdriver MKII and found what I was looking for. This will now be preference to people looking to get into vaping. I owe it to ECF!!!! thanks guys/gals/mistress
Great glad you got it so fast I had good shipping from TW also, From what I read on here the Ultrafires are not really 1200mAh all companys rate there batteries a little different. I use my SD with 1.5 - 1.7 ohm attys. I believe I'm going to pick up a Super T top juicing mod for mine at the end of the week, which should make for a crazy looking PV and no more dripping just hook it up 10ml's of juice and good to go
I might try and make a threaded sleeve for my SD so it will take an 18650. It might be a bit ugly, but man I love the hits 18650's give off. Congrats on your new SD.
thanks guys, I may get the ultrafires just to have them(due to C rating). I'll study to see if I can come up with a difference over long time use.
I agree the Ultrafires are almost certainly not 1200mah (I have a bunch) BUT they do last longer between charges than the "official" ones like TW sell (they are also good batteries though). I'm mainly using LR901 atties with SD (1.7ohm). Let us know how you get on with the Super T juicing mod - I'd love to know
The MAH doesn't concern me. So far the 900 MAH 18350s have lasted just fine throughout the day. It's the C rating that I'm concerned about which refers to stress put on the battery from from the amperage that a atty draws. There is a logical chance, strictly from what I understand, that a 2 C battery will take more charges compared to a .5C rated battery such as The Moettcell batteries that are supplied through TW. Only reason I wiould do this is out of curiosity. I do not Doubt the quality of the Moettcells and the DKIs
Do you know if the resistance is a true 1.7 ohm or just factory spec?
Generaly you will get betweet 1.5 & 1.7 I have both and they work about the same you can't tell the difference like you can using a standard atty
I'll do that it's a couple of weeks to get after order. The first ones went out last night I believe so there should be some word on them soon.
Here is the thread if you want to follow it
http://www.e-cigarette-forum.com/fo...ing/132729-vapemate-juice-feeder-super-t.html
Here is the thread if you want to follow it
http://www.e-cigarette-forum.com/fo...ing/132729-vapemate-juice-feeder-super-t.html
HMMM. I have dripped before on my other 510 setups and have heard of feeder but at the sametime, never looked into them much. How do these work. I guess some sort of electronic pump that pumps the liquid to act as an auto drip. Does it drip everytime you hit the button? How much juice does it use up?
well last night when I got home my 2ohm cartos came in. I thought this would put me at the perfect spot......well....it didn't. With a halfwaay beat battery at 3.44V it just fried my juice for the most part. You could hear it sizzling and it had almost no taste, still the same TH and vapor as using the regular carts. I'm sort of confused here since with the half beat battery and 2 ohm cartos I was frying juice with LESS Wattage than using my freshly charged battery at 4.15Volts which is not frying juice. 6.889 Watts for current setup, 5.917 Watts with the half beat battery and 2ohm cartos. 3.657 Watts with the ego battery to regular carto. As much as I liked the 2.8 Ohm carto on my Ego, I don't like the 2ohm on my screwdriver. hmmm.
- Status
Similar threads
