I experienced the same sort of issue with my ego-t. The thing tasted so bad I was tempted to just toss it, turns out I just had to vape the taste away. hope everything works out for you.
Second Try At e-Cigs and Still Bad Taste!
- Thread starter NestoChe
- Start date
- th_trl_thread_readers 0
- Status
check out BlueMist Vapor. They have a huge selection of juices. 250+. They have sample packs which I recommend you get so you can try a bunch of different juices without spending a lot. You can pick 5 for $10 The samples come in small bottles. DO NOT get big bottles until you know you like a juice.
That could help. The only way to be sure is to try and see. Taste is so subjective that it's impossible to make objective decisions about what will work from one of us to another. We can read reviews and sometimes get in the same ballpark, but try and see is the only way to really tell.
for fruity flavors I like vaporbomb. I DIY my own juice now but I was a regular customer for them for a long time.
I guess it's also possible that there's a dead carto/atty involved (even multiples). I bought a pack of 5 eGo DCCs from a respected seller last week - every one tasted like burnt carpet tiles.
I mean the mouth piece. I got the black mouth piece and removed the white plastic ring
Last edited:
Normally people like cartomizers a lot more than an atty/cartridge, but you can def try it. You might like it.
I would also recommend filling a cartomizer with a syringe though and see if that fixes the problem.
I originally posted this in another thread for someone who asked how to fill a Ressurector cartomizer, but this is really for any carto. Instead of putting 2ml of juice in the syringe(thats what the Ressurectors hold) your going to put whatever the cartos your using holds. If you dont know, then just SLOWLY fill and you will see the juice rise to the top. Once you start to see the juice and the polyfil you can see becomes "slushy" it is full. Follow these steps and it might fix the problem
Here ya go
How to fill a cartomizer with a syringe:
"All you have to do is take the dropper part of the bottle off your juice and fill your syringe with 2ml for a new carto. Take the rubber tip off the carto and carefully insert the needle down the side pushing against the metal. DO NOT go thru the filler because it will move it and you could potentially break a connection and your carto. Slide the needle down the side and go all the way to the bottom. Then slowly start dispensing some juice. Dont dispense it all bc then it won't be evenly distributed. Put alittle in, then take it out and insert the needle in a different spot. I normally do it in 3 spots (in a triangle) I found it distributes the best, but you could just do it in 2, on opposite sides. Make sure the needle is at the bOttom bc then you will not have to wait at all for it to settle. Disperse slowly and you will begin to see the toP of the filler become slushy. It is full then, don't put more. If its a new carto is will def hold 2ml, if your refilling it won't take a lot so pay attention and once it gets alittle slushy stop. While your filling hold a napkin or something under the carto bc if you do it too fast a few drops will come out the battery end. If that happens its only bc you did it too fast and the poly fill didn't absorb quick enough.( that happens to me bc I am impatient and fill it in about 10 sec, so I just hold a paper towel or napkin underneath.) wipe up the drops and put the rubber cap back on the carto. Then put the carto between your hands and rub back and forth spinning the carto quickly. This will insure the liquid is evenly distributed in case you put too much on one side from the syringe.
Now you have a perfectly filled ressurector that is ready to be used right away!"
Let me know if you have any questions
I would also recommend filling a cartomizer with a syringe though and see if that fixes the problem.
I originally posted this in another thread for someone who asked how to fill a Ressurector cartomizer, but this is really for any carto. Instead of putting 2ml of juice in the syringe(thats what the Ressurectors hold) your going to put whatever the cartos your using holds. If you dont know, then just SLOWLY fill and you will see the juice rise to the top. Once you start to see the juice and the polyfil you can see becomes "slushy" it is full. Follow these steps and it might fix the problem
Here ya go
How to fill a cartomizer with a syringe:
"All you have to do is take the dropper part of the bottle off your juice and fill your syringe with 2ml for a new carto. Take the rubber tip off the carto and carefully insert the needle down the side pushing against the metal. DO NOT go thru the filler because it will move it and you could potentially break a connection and your carto. Slide the needle down the side and go all the way to the bottom. Then slowly start dispensing some juice. Dont dispense it all bc then it won't be evenly distributed. Put alittle in, then take it out and insert the needle in a different spot. I normally do it in 3 spots (in a triangle) I found it distributes the best, but you could just do it in 2, on opposite sides. Make sure the needle is at the bOttom bc then you will not have to wait at all for it to settle. Disperse slowly and you will begin to see the toP of the filler become slushy. It is full then, don't put more. If its a new carto is will def hold 2ml, if your refilling it won't take a lot so pay attention and once it gets alittle slushy stop. While your filling hold a napkin or something under the carto bc if you do it too fast a few drops will come out the battery end. If that happens its only bc you did it too fast and the poly fill didn't absorb quick enough.( that happens to me bc I am impatient and fill it in about 10 sec, so I just hold a paper towel or napkin underneath.) wipe up the drops and put the rubber cap back on the carto. Then put the carto between your hands and rub back and forth spinning the carto quickly. This will insure the liquid is evenly distributed in case you put too much on one side from the syringe.
Now you have a perfectly filled ressurector that is ready to be used right away!"
Let me know if you have any questions
Thanks everyone for you're suggestions, I very much appreciate it. I'm going to read and try all of these recommendations. I guess it is going to take some time before I settle on the right juice. I'm not giving up yet!!..lol
thanks again!
thanks again!
sample packs are def the way to go to try a lot of juices. Many vendors have them. Personally I like the sample packs where you can pick your own. And like I said, dont buy big bottles until you know you like a juice or your going to go broke
Goodluck and enjoy it!
Goodluck and enjoy it!
Good luck with the sampling phase..!Watermelon is always awesome. This is what you should do. Go to pinkspotvapors.com and get a sampler pack. You can try six different flavors and at a good price. That's what I did. They have the best eliquids in my opinion
You definitely need to try out a few different samples, from even a few different vendors to see what is pallatable to you
- Status
Similar threads
