It's your favorite special human, my mom always said so anyway, I'm always posting dumb and dangerous .... on the forums but I'm a loveable guy.
Ps. I didn't mean to give anyone bad ideas, I keep forgetting with people on the internet it's monkey see monkey do, so if you can save someone's face, then by all means.
As far as vaping goes I have the dovpo dual topside black and gold edition squonk mod with the profile ps running the nexmesh A1 strips in parallel mode(.07 ohms, 43 amps, 130 watts)
I use batteries that are within the amp rating.
Molicel p28a batteries I think they're called.
The profile is also gold, perfect match.
Im a flavor chaser and this is where I ended up. Haven't found anything that gives off as good flavor as the a1 strips in the profile ps.(some builds have come kind of close) (Clouds are godlike) but not important. It would be subjective saying it's the best vape ever, but in terms of how much flavor you get each hit, nothing gives more. And if there's something you think could deliver more flavor let me know I want to continue the chase.
My yihi chip in my dovpo only is supposed to go up to 40 amps, and it only goes to 43, I'm ables to squeeze that much out and no more. And I'm only at like 3.3 volts roughly at 130 watts at .07ohms. it requires so much power to function properly if you can dish out at least 35 amps.
UNLESS you vape it in series mode, still very good, just prefer parallel. So if you got a single battery mod, then put the series pin in and the A1 strips work perfect at 90 to 100 watts.
Air flow is so buttery smooth my lord.
Throw out the strips that come with it, and order the a1 strips, ss316, and classic strips and try those. The parallel 510 pin isn't pre installed tight enough so only one side will fire so out of the box you need to tighten it for both to fire.
^all the reviewers on YouTube thought that only one side was supposed to fire with the pre installed pin to they each did the review in series.
And they used the strips that came with it and they are trash. Throw out those strips that come with the device.
2/3 of a piece of cotton bacon roughly is the perfect wick size. Really tight but not as tighten as you can possibly go either, tighter than a regular coil.
So since the reviews did all their reviews with the stock mesh strips, annnddd in series mode, it's a very underrated rda.bit still got decent reviews, but it should've had more popularity with the performance of the other strips. but no one even bothered to try or knew about them and now their profile is sitting in their vape part graveyard when they have no idea what their missing out on.
I also got the stng by wotofo, I love wotofo obviously, there are better mtl rdas, but it is great, kind of prehistoric but prehistoric works, sometimes simple is better, and it's only 15 dollars. So it's a no brainer.
Right now I'm vaping on 28g ni80 2mm 9 wraps. 1 ohm. Very nice. Mouth to lung hit. Nothing else much to say.
I want to get some 30 guage ni80, do a 3mm 7 wraps 2 strand parallel coil(.9ohm)
Also want to try 32 guage 3mm 5 wrap(1ohm) 2 strand
And want to try 32 g 6 wrap(1.15 ohm) 2 strand
I know one of those I try will end up being the winner. Never seen anyone do a parallel build for mtl so I like how it'll be unique. I've figured out for mtl I like to be from.9 to 1.1 ohms. Usually around 17 to 20 watts.
So that's all about me in regards to vaping.
The picture of the cloud from the profile does not do the justice a video does, not at all, but still an idea. The only thing I've seen blow clouds this big is an rda with a triple coil deck or one of those decks with 4 or more coils. But that's just too gigantic and that much heat wouldn't be fun all the time.
Ps. I didn't mean to give anyone bad ideas, I keep forgetting with people on the internet it's monkey see monkey do, so if you can save someone's face, then by all means.
As far as vaping goes I have the dovpo dual topside black and gold edition squonk mod with the profile ps running the nexmesh A1 strips in parallel mode(.07 ohms, 43 amps, 130 watts)
I use batteries that are within the amp rating.
Molicel p28a batteries I think they're called.
The profile is also gold, perfect match.
Im a flavor chaser and this is where I ended up. Haven't found anything that gives off as good flavor as the a1 strips in the profile ps.(some builds have come kind of close) (Clouds are godlike) but not important. It would be subjective saying it's the best vape ever, but in terms of how much flavor you get each hit, nothing gives more. And if there's something you think could deliver more flavor let me know I want to continue the chase.
My yihi chip in my dovpo only is supposed to go up to 40 amps, and it only goes to 43, I'm ables to squeeze that much out and no more. And I'm only at like 3.3 volts roughly at 130 watts at .07ohms. it requires so much power to function properly if you can dish out at least 35 amps.
UNLESS you vape it in series mode, still very good, just prefer parallel. So if you got a single battery mod, then put the series pin in and the A1 strips work perfect at 90 to 100 watts.
Air flow is so buttery smooth my lord.
Throw out the strips that come with it, and order the a1 strips, ss316, and classic strips and try those. The parallel 510 pin isn't pre installed tight enough so only one side will fire so out of the box you need to tighten it for both to fire.
^all the reviewers on YouTube thought that only one side was supposed to fire with the pre installed pin to they each did the review in series.
And they used the strips that came with it and they are trash. Throw out those strips that come with the device.
2/3 of a piece of cotton bacon roughly is the perfect wick size. Really tight but not as tighten as you can possibly go either, tighter than a regular coil.
So since the reviews did all their reviews with the stock mesh strips, annnddd in series mode, it's a very underrated rda.bit still got decent reviews, but it should've had more popularity with the performance of the other strips. but no one even bothered to try or knew about them and now their profile is sitting in their vape part graveyard when they have no idea what their missing out on.
I also got the stng by wotofo, I love wotofo obviously, there are better mtl rdas, but it is great, kind of prehistoric but prehistoric works, sometimes simple is better, and it's only 15 dollars. So it's a no brainer.
Right now I'm vaping on 28g ni80 2mm 9 wraps. 1 ohm. Very nice. Mouth to lung hit. Nothing else much to say.
I want to get some 30 guage ni80, do a 3mm 7 wraps 2 strand parallel coil(.9ohm)
Also want to try 32 guage 3mm 5 wrap(1ohm) 2 strand
And want to try 32 g 6 wrap(1.15 ohm) 2 strand
I know one of those I try will end up being the winner. Never seen anyone do a parallel build for mtl so I like how it'll be unique. I've figured out for mtl I like to be from.9 to 1.1 ohms. Usually around 17 to 20 watts.
So that's all about me in regards to vaping.
The picture of the cloud from the profile does not do the justice a video does, not at all, but still an idea. The only thing I've seen blow clouds this big is an rda with a triple coil deck or one of those decks with 4 or more coils. But that's just too gigantic and that much heat wouldn't be fun all the time.
