Sigelei Mechnical Mods

[CharTek]

i saw a link to that vid in LOV too but he didnt say where the ordering would happen he did say it would open up at 8EDT

 

[whit77]

Hmm, I thought for the 19, you would only be drilling into the delrin ... is there brass somewhere that needs to be tapped also?

Here's my #19, I removed the switch magnet and used a tap and dye and a m4 brass bolt, so now I can adjust the throw of the switch with the turn of screw

Here's what I did

 

[Oktyabr]

Here's what I did

I'm assuming you used a drill press or did you do this by hand? Remember the size of the drill bit and tap?

 

[whit77]

I'm assuming you used a drill press or did you do this by hand? Remember the size of the drill bit and tap?

I used a cordless de-Walt drill I'm in the uk so its metric, a brass m4 pan head bolt, 3.3mm drill bit and a m4 tap

 

[NGAHaze]

Here's what I did

Thanks, those pics were perfect!

What length of 4mm bolt did you use? I could cut one down if necessary so I guess I'm just wondering what the min length should be. I'm thinking a 5/32 would be pretty close if I can't find a 4mm.

I don't know what I was thinking with the delrin ...

 

[forg1vn]

Got my 19, let the fun begin...

 

[whit77]

Thanks, those pics were perfect!

What length of 4mm bolt did you use? I could cut one down if necessary so I guess I'm just wondering what the min length should be. I'm thinking a 5/32 would be pretty close if I can't find a 4mm.

I don't know what I was thinking with the delrin ...

I just got some about 1" long and cut it to suit, I did drill and tap about 3/4 of the length of the brass part

 

[XfooYen]

Thanks, those pics were perfect!

What length of 4mm bolt did you use? I could cut one down if necessary so I guess I'm just wondering what the min length should be. I'm thinking a 5/32 would be pretty close if I can't find a 4mm.

I don't know what I was thinking with the delrin ...

If you're in the US, use a 1/2" #8-32 machine screw. Tap the switch 3/8 depth. Cut the screw to size.

*Don't expect much. I'm on Tapatalk.*

 

[whit77]

To give you an idea

 

[xsphat]

Here's my #19 with an RSST on top and an o-ring to fill gap created by the slant cap. I got this from vaportekusa, and the shipment was delayed due to changes, but what they did wasn't specified. It gives me much hotter vapor than my #13a, so maybe they fixed the voltage drop. Who knows.

 

[whit77]

Here's my #19 with an RSST on top and an o-ring to fill gap created by the slant cap. I got this from vaportekusa, and the shipment was delayed due to changes, but what they did wasn't specified. It gives me much hotter vapor than my #13a, so maybe they fixed the voltage drop. Who knows.

View attachment 211269

View attachment 211270

Good idea, but if its mainly gennys your going to use I'd sand the #19 top flat

 

[NGAHaze]

I just got some about 1" long and cut it to suit, I did drill and tap about 3/4 of the length of the brass part

If you're in the US, use a 1/2" #8-32 machine screw. Tap the switch 3/8 depth. Cut the screw to size.

To give you an idea

Thanks guys, highly appreciate the help!

 

[Lhartman89]

i saw a link to that vid in LOV too but he didnt say where the ordering would happen he did say it would open up at 8EDT

It looks like he posted the link to the group now.

Edit: He is selling them for as much as the sigelei's cost. I don't think I will get getting any for now. $29 is a little too much for a piece of metal......

 

[mrfixit]

I just scored a segelei #8 from aquavaporcig for $18.96 now they $29.95 but if you use the the code av20 it makes them $23.95 but had a $5 gift certificate so that's why so low also you get a free 10ml.bottle of juice decent selection of flavors.

 

[El_tecolote]

I just scored a segelei #8 from aquavaporcig for $18.96 now they $29.95 but if you use the the code av20 it makes them $23.95 but had a $5 gift certificate so that's why so low also you get a free 10ml.bottle of juice decent selection of flavors.

Have one, but that's a great deal...too good to pass.

 

[aintdunn]

View attachment 211036
View attachment 211037
Potatoe quality pics for aintdunn

Thanks so much CharTek! I was really hoping it would look good together and IT DOES!

 

[in4mati0n11]

It looks like he posted the link to the group now.

Edit: He is selling them for as much as the Sigelei's cost. I don't think I will get getting any for now. $29 is a little too much for a piece of metal......

I have an original AGA-T and I hear you can combine old with new and create a Chibrid...... lookup "cheebrid"

 

[clancy0below]

sadly not with the sig mods

 

[Red_Bird]

I have no self control ... just ordered a # 8.

you will be shocked how solid a device it is.

 

[in4mati0n11]

Thats why I bought a KTS.... gonna make me a cheebrid...