SIGELEI VMAX V 3 help with tank

[srh70634]

hello all,

I just bought the SIGELEI VMAX V 3 round top. I also have the Kanger Pro tank 2 will this tank work well with the mod? I wanted to know if so what would be a good oHm coil should I use? 2.5 or 1.8 or any other oHm? If not the Kanger what would be a good tank for this mod?
And last question, should I charge the Vmax fully when I first get it or should I drain it first?

Thanks.

 

[steved5600]

Actually you can use either. You can adjust your voltage or in a VW your wattage to accommodate either. You should have gotten a card with your PT that shows the voltage settings but if not here is a spread sheet and a chart you can use to set it. I usually us 6 watts. View attachment ecig calculators.xlsx

 

[steved5600]

Oh if you have an android you can download eLiquid Recipe Manager. It has a wattage calculator in the app.

 

[Racehorse]

Well you would not be 'charging' the vmax because that is just the mod that holds the battery.

You will want to fully charge the batteries, yes. And make sure they are IMRs, since the Vmax is a VV device that will put demands on the battery. You may use a 18350, a 18490, or a 18650 since this is a telescoping mod. Depends on the size you want to carry.

The Vmax is both Ego threaded and 510 threaded, and that is one of the things I liked about it! I used Kanger EVODs and Protanks on mine.

You may use 2.5 or 1.8 or 2.2 ohms......any ohms, since this is a VV and VW device, so you can adjust your voltage and/or wattage using the vmax 8 part menu system, up or down, to get the vape you need.

It's a real nice mod!

I used it at 6-7 watts, that is my sweet spot.

With EVOD in 18490 mode (I have small hands even for a female)

 

[Texasman2011]

Well you would not be 'charging' the vmax because that is just the mod that holds the battery.

You will want to fully charge the batteries, yes. And make sure they are IMRs, since the Vmax is a VV device that will put demands on the battery. You may use a 18350, a 18490, or a 18650 since this is a telescoping mod. Depends on the size you want to carry.

The Vmax is both Ego threaded and 510 threaded, and that is one of the things I liked about it! I used Kanger EVODs and Protanks on mine.

You may use 2.5 or 1.8 or 2.2 ohms......any ohms, since this is a VV and VW device, so you can adjust your voltage and/or wattage using the vmax 8 part menu system, up or down, to get the vape you need.

It's a real nice mod!

I used it at 6-7 watts, that is my sweet spot.

With EVOD in 18490 mode (I have small hands even for a female)

i have almost the same setup.. except i am using the protank 2. it works flawlessly i love it. mine is the vmax v5

 

[LEE9476]

That tank should work very well with the zmax, I use evods on it quite a bit at 10 watts. And just for the sake of sharing, here's another tank setup that performs great on mine

 

[srh70634]

I see you talking about watts (6) or (10). what about the voltage? what setting should that be at?

 

[LEE9476]

There's a handy chart pbusardo has a link to on his website, it tells you the corresponding watts and voltages per different resistance atomizers

Link here: http://25.media.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

 

[srh70634]

perfect! that works perfect! I now have a setting that works awesome. Im new at this stuff, at first I bought the eco twist not to bad its a great back up for me. Then I went and bought the Vmax and I love it. with this setup the kanger pro 2 and the Vmax its a perfect combo for me.
Thanks again for all the help and input from all.
I really like this site.