SMOK Magneto question

[LowTone]

I'll try to make this as short and simple as possible. My question,

If one were to pair a Aspire BVC tank rated at 8-14 (1.6/1.8 ohm) watts, with the smok magneto using a 18650 that is rated at 6.2A and 3100mah, would there be any issues?

 

[r77r7r]

Not sure, but I believe we ran them on basic eGo batteries.

 

[UncLeJunkLe]

I'll try to make this as short and simple as possible. My question,

If one were to pair a Aspire BVC tank rated at 8-14 (1.6/1.8 ohm) watts, with the SMOK magneto using a 18650 that is rated at 6.2A and 3100mah, would there be any issues?

Ohms law calculators are everywhere.

https://ohmslawcalculator.com/ohms-law-calculator

At full charge (about 4.2 volts) and at 1.6 ohms on a mechanical mod, you are pulling roughly 2.6 amps. Assuming you have a reputable battery from a reputable vendor so you know it is actually 6.2A, you're fine pulling only 2.6 amps or less.