smok morph 2 TFV18 Kit 230W
The SMOK Morph 2 "Make a stir" kit is composed of the Mod Morph 2 Mod and the TFV18 tank, in essence it is an updated reinterpretation of the previous Morph 219 kit.
There are several interesting aspects for both the mod and the new Tank TFV18.
Enjoy the reading
The package shows on the front an image of the new Smok kit, there are the color indications and the writing "Dual External 18650 batteries".
On the back there are; warnings, hologram and scratch & check.
The packing list and the main features are shown on the sides of the box.
The kit includes:
• 1 MORPH 2 Mod
• 1 Tank TFV18 (7.5 ml)
• 1 0.33Ω TFV18 Mesh Coil (pre-installed)
• 1 TFV18 Dual Meshed Coil of O.15Ω
• 1 spare Bubble Glass
• 1 Type C cable
• 1 User Manual
Morph 2 Mod Specifications:
• Dimensions: 47,5x31.7x88mm
• Weight: 133.5 g
• Output Mode: WW - TC / NI-TI-SS
• Power Range: 1W-230W (VW) / 10W-80W (TC)
• Standby current: <300uA
• Input voltage: 6.4V-8.4V.
• Output voltage: 1.2V-8.2V.
• Reaction time: 0.001s
• Charging voltage: 5V ± 0.2V.
• Charging current: 2A
• Resistance range: 0.1Ω-2.5Ω (WW) / 0.05Ω-2Ω (TC)
• Temperature range: 200 ° F-600 ° F / 100 ° C-315 ° C.
* In countries subject to TPD regulations the Morph 2 Mod kit can be purchased in combination with the TFV-V2 Mini Tank (2ml).
TFV18 Tank Specifications:
• Dimensions: 66.3xØ31.6mm
• Weight: 93.3g
• Material: stainless steel
• Capacity: 7.5ml (Mesh Coil 0.33Ω)
• Capacity: 6.5ml (Dual meshed Coil of O.15Ω)
• Recommended Power: 80-140W (best 100-110W)
• Thread: 510
Currently the Smok Morph 2 kit can be purchased in 8 different color combinations.
First impressions:
I received for this Test the Smok Morph 2 TFV18 kit in “White-Red” color. This Morph 2 kit is designed in red / garnet colored zinc alloy (same color for the TFV18 tank).
The soft two-tone leather (White-Red) covers a large part of the surface, and undoubtedly gives a comfortable touch, the excellent degree of finish and the right leather / metal mix give this kit an elegant sporty look.
Before receiving the kit and based on the images on the internet, I was expecting a much bigger and heavier Mod, I must say that I have been proved wrong, the Morph 2 has quite comfortable dimensions, it carries well and does not weigh too much. I like that!
The new TFV18 tank has a rather imposing appearance without however being more bulky than the previous TFV16.
TFV16 and TFV18 look like twins, however the differences are there and we will see them later.
The front shows the 0.96 "color screen, the USB-C charging socket, the" + "and" - " adjustment buttons, all housed within a metal holder, surrounded by two-tone leather upholstery.
On the back, the frame design houses the large vertical writing “Morph2” in the center, the two-tone coating creates the edge and extends to the sides of the Mod.
The fire button is located on the side, its shape is rectangular of excellent size and is easy to click, on this side you can see the writing "smok Newchip inside" in the center between the two parallel red seams.
On the other side there are 3 white parallel seams on the red background.
The top of the Mod Morph houses a cup with 510 attachment and spring loaded pin, the cup is fixed to the frame by three torx screws. The central position allows to house tanks up to 31mm in diameter without protrusion.
The access door to the compartment / batteries is located in the lower part of the Mod, in addition to logos & brands you can see the opening / closing mechanism and the writing “Designed & Manufactured By Smok”.
The SMOK Morph 2 "Make a stir" kit is composed of the Mod Morph 2 Mod and the TFV18 tank, in essence it is an updated reinterpretation of the previous Morph 219 kit.
There are several interesting aspects for both the mod and the new Tank TFV18.
Enjoy the reading
The package shows on the front an image of the new Smok kit, there are the color indications and the writing "Dual External 18650 batteries".
On the back there are; warnings, hologram and scratch & check.
The packing list and the main features are shown on the sides of the box.
The kit includes:
• 1 MORPH 2 Mod
• 1 Tank TFV18 (7.5 ml)
• 1 0.33Ω TFV18 Mesh Coil (pre-installed)
• 1 TFV18 Dual Meshed Coil of O.15Ω
• 1 spare Bubble Glass
• 1 Type C cable
• 1 User Manual
Morph 2 Mod Specifications:
• Dimensions: 47,5x31.7x88mm
• Weight: 133.5 g
• Output Mode: WW - TC / NI-TI-SS
• Power Range: 1W-230W (VW) / 10W-80W (TC)
• Standby current: <300uA
• Input voltage: 6.4V-8.4V.
• Output voltage: 1.2V-8.2V.
• Reaction time: 0.001s
• Charging voltage: 5V ± 0.2V.
• Charging current: 2A
• Resistance range: 0.1Ω-2.5Ω (WW) / 0.05Ω-2Ω (TC)
• Temperature range: 200 ° F-600 ° F / 100 ° C-315 ° C.
* In countries subject to TPD regulations the Morph 2 Mod kit can be purchased in combination with the TFV-V2 Mini Tank (2ml).
TFV18 Tank Specifications:
• Dimensions: 66.3xØ31.6mm
• Weight: 93.3g
• Material: stainless steel
• Capacity: 7.5ml (Mesh Coil 0.33Ω)
• Capacity: 6.5ml (Dual meshed Coil of O.15Ω)
• Recommended Power: 80-140W (best 100-110W)
• Thread: 510
Currently the Smok Morph 2 kit can be purchased in 8 different color combinations.
First impressions:
I received for this Test the Smok Morph 2 TFV18 kit in “White-Red” color. This Morph 2 kit is designed in red / garnet colored zinc alloy (same color for the TFV18 tank).
The soft two-tone leather (White-Red) covers a large part of the surface, and undoubtedly gives a comfortable touch, the excellent degree of finish and the right leather / metal mix give this kit an elegant sporty look.
Before receiving the kit and based on the images on the internet, I was expecting a much bigger and heavier Mod, I must say that I have been proved wrong, the Morph 2 has quite comfortable dimensions, it carries well and does not weigh too much. I like that!
The new TFV18 tank has a rather imposing appearance without however being more bulky than the previous TFV16.
TFV16 and TFV18 look like twins, however the differences are there and we will see them later.
The front shows the 0.96 "color screen, the USB-C charging socket, the" + "and" - " adjustment buttons, all housed within a metal holder, surrounded by two-tone leather upholstery.
On the back, the frame design houses the large vertical writing “Morph2” in the center, the two-tone coating creates the edge and extends to the sides of the Mod.
The fire button is located on the side, its shape is rectangular of excellent size and is easy to click, on this side you can see the writing "smok Newchip inside" in the center between the two parallel red seams.
On the other side there are 3 white parallel seams on the red background.
The top of the Mod Morph houses a cup with 510 attachment and spring loaded pin, the cup is fixed to the frame by three torx screws. The central position allows to house tanks up to 31mm in diameter without protrusion.
The access door to the compartment / batteries is located in the lower part of the Mod, in addition to logos & brands you can see the opening / closing mechanism and the writing “Designed & Manufactured By Smok”.