Smok Tech VMax

Status
Not open for further replies.

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
...***

Does that post give you any indication that I might just be here to try to help people by giving them as much useful information as I possibly can, for the sole purpose of letting them experience the best vape that they can, for the least amount of total expenditure, which might just involve putting their limited resources into something that I know will work very, very well for them?

This is going to be my last post on the subject. John, I've never attacked or harassed you, despite your howls to the contrary. I also never intended for this to be some pissing match. For Freddie, who seems to think this is about the relative benefits of one PV over another, it's not. It's about the suitability, or lack thereof, of one device for a particular person. I don't for a second doubt that the Vmax is a great PV and I never implied anything else.

I'm also not doubting your intentions in the least, John. That's not the issue here at all. I think what you're not considering is that, although you are trying to give people as much useful information as you can, it's far in excess of what some people want, asked for or more importantly, are prepared or willing to tackle. Someone who titles a thread "Too much info" is crying out for a simplified solution, not a technical treatise, no matter how thoughtfully constructed or simplified. They are so desperate for simplicity that they find the Volt an appealing option. Just to get them to seriously consider the relative benefits of something like a *Go is a considerable challenge because, true or not, they see a big battery mod as inherently confusing and are likely to throw up a mental block that is difficult to overcome. If you doubt that, re-read Digger's post where he expresses exactly those beliefs. And Digger appears to be way ahead of the person who wrote the "Too much info" post.

Does that post also give you an idea that I might feel a little underappreciated and maligned right about now? That was not a cut-and-paste; that was off the top of my head, and probably took about an hour. (Will I cut and paste it in the future? You better believe it). lol

That little e-cig primer you wrote was fine. It would make a good response for anyone who expressed an interest in an easy explanation of a technical subject. But regardless of it's technical merits, it's will go unread and unappreciated by someone who is paralyzed by information overload to the point where they're ready to pick up a pack of e-cigs at the gas station.

I never said you cut and pasted anything. I meant the word "can" as in "could", not "did". Of course you didn't cut and paste your original recommendation. What I said was that in the future you can just C&P, because you are convinced that the Vmax is a one-size-fits-all APV, regardless of any factors or concerns expressed by the OP. All anyone has to do is read your explanation of how e-cigs work and they'll see the light.

Well, John, I'm sorry. It doesn't work that way. That's not human nature and the success of companies like Blu and Volt provide all the proof you need of what I'm saying. You might know technical subjects, but you're missing the mark if you think people like Digger and the "Too much info" poster are going to abandon their simplified e-cigs after reading and understanding what you've written. It's not a matter of the subject matter being too difficult, it's a matter of they're not interested at this point in time. I know it's frustrating. It makes you feel unappreciated and maligned. But think how unappreciated all the people who try to steer someone away from a Volt or a V2 feel when someone comes in and carpet bombs a thread, resulting in the OP retreating back to their oversimplified first impression and ending the thread with "I'm getting a volt". I will virtually guarantee you that the "Too much info" poster will not, and did not, read your e-cig primer. They backed off, retreated in confusion and likely will buy the Volt or, worse yet, forgot the whole idea. That's just the way people are and all your good intentions won't change it.

Look, I'm very selective about who I give information directly to. You will not find another thread in which I have recommended the VMax to a beginner, although I probably will, and more often.

I believe that. If you can recommend a Vmax to a stone newbie who clearly expressed a desire for the simplest e-cig possible and the least amount of technical jagon possible, you'll recommend it to anyone.

I posted that because based on what I know now, if I had started with those exact five items for $185, I would have been thrilled with my vaping experience, exactly and obviously just as I am now.

Based on what you know now. What you know now. Not what you knew then. Not what you, let alone the less technically oriented, knew when you didn't know a carto from a cantaloupe.
Some people want to learn as much as possible before they start and they want to jump in with both feet. They are technically inclined and willing to devote a considerable amount of time before beginning. You and I are like that. Some people are not. They are not interested and/or capable. They are not willing or capable to absorb vast amounts of information before they make the switch to e-cigs. I would hope that you could acknowledge that fact and realize not everyone is like you and me. You can often tell the difference by what they say in their threads. A thread titled "Too much info." provides a clue that this person is not particularly interested in learning a lot of technical details, no matter how well presented.

We need to not forget the objective. It isn't to turn newbies on to the best vaping experience possible and the best design possible. The objective is to introduce them to something that they'll be comfortable with actually getting and using and that will perform well enough that they'll abandon the ciggies. It does not good to educate them to the point that they're paralyzed by information and spend the next year searching for the ultimate PV as they continue to smoke. In our enthusiasm and good intentions, we should not lose sight of that. What's the old saw? Don't let the perfect be the enemy of the good.

You keep using the term "....-hurt". Is it you who is actually ....-hurt, because your e-Power is outshone by superior devices? Is your continued use of the term "fanboy" toward me a "psychological switcheroo"? Something to think about as you please leave me alone.

I used the term butthurt as shorthand for "unappreciated and maligned", which you have complained that you feel. That's all.

I fully acknowledge the Vmax is far superior to the e-Power or any *Go device. In fact, just last night I recommended a Vmax to someone who was interested in a VV. So it's not "my" e-Power". I don't even own one. I don't always recommend one. When I do, it's because of the large numbers of newbs (including yourself) that device has satisfied. Sometimes I'll recommend a kGo, sometimes a LT, sometimes something else including a Volt or Bloog or Provari, and even a Vmax. Because I read what people write. I ask questions. I try to gauge their needs and desires and, half the time, it's a win just to keep them away from a ciggy looking thing with a light on the end. Unlike you, I'm not convinced that everyone needs simply to read my well thought out e-cig primer and they will see the light and become instantly comfortable with the most advanced PV on the market. Maybe if they did read and understand, some would. But many, probably most, of them won't and it's not that hard to tell who they are. They're just not interested, no matter how well it might serve them. That's a fact. There's nothing you or I can do about it and we end up doing more harm than good by forcing the issue.

Look at Digger's post again. How successful do you think you'd have been had he asked for a recommendation and you hit him with that wall of text?
 
Last edited:

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
Why mess with that knock off? I would rather pay the extra money and buy a Provari that has a proven track record.. Plus if you have a problem with it, you cant beat Provapes customer service... Made in the USA.........

Beyond the price, there are some technical issues, notably the higher current limit and the downward regulation, where the Vmax has an advantage. The current limit alone is a major deal to some people, even if it turns out they never really even take advantage of it. That, and the price which will surely drop, need to be balanced with the proven record and the made in USA factor of the Provari. Right now, they both have their advantages and disadvantages. Once the Vmax accumulates a good reliability record, it'll be very hard to beat unless Provari does some major re-designing.
 

donnah

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2010
4,470
4,463
Albemarle, North Carolina
While I AM partial to the Provari for it's quality, features, performance and customer service.. I never recommend it to a new vaper. Most new vapers need something simple, inexpensive and easy to learn. I've found that when new vapers get hold of an advanced device, they tend to blame that device for any problems they experience. (just go browse through the provari forum right now LOL) In the vaping world, it's very easy to get overwhelmed and just drop it. Many people just don't have the available funds to purchase a $100+ mod. Trying to wrap my head around volts and amps and resistance was hard for me and took me quite a while to get it plus I needed to work up to higher voltage vaping. Some people want a device that had a readout and some don't. I don't recommend the Provari to those who don't want or care about knowing what voltage they're using and there's nothing wrong with not caring or wanting to know. So one PV doesn't fit everyone.

As for this particular device... I am seeing terms like "beast" and "monster" used and I still want to know what's beastly about a 4 and a half watt vape. I've seen where people love extreme high voltage vaping..I don't see how they can do that without burning up their cartos or attys but maybe they're using something that can handle that.

This is a new device and I haven't seen many reviews on it other than what I'm reading here. I'm very interested on what pbusaro will have to say about it. If it's worthy of respect it will get it. For $130 for just the tube alone it better not only have the specs but the build quality and customer service to go along with it.
 

VAPNJ350

Super Member
ECF Veteran
Verified Member
Mar 26, 2011
733
941
50
Jacksonville,FL.
Ok so who wants to be the hero and post the instruction manual? Anyone? Freakin menu is all cattywampus.
Scan it.. .pdf format
Type it out
I ain't to proud to beg ya'll.
1292747789041s.jpg


Its super simple Puff

Push the button 3 times to go to menu 1.Uu ( VOLTAGE UP) (adjusts voltage upwards)
once you see 1.Uu , wait 2 seconds or so and then the voltage your device is set at will appear, then push the button again or hold it to raise the voltage setting

Push the button 4 times to go to voltage down menu.....2.Ud (VOLTAGE DOWN)
Once you see this wait 2 seconds like before then refer to previous as above.

Push the button 5 times to go to menu 3.So (switch on/of)
When you see this in the display wait 2 seconds then you can turn the device on and off, when the device is off when you push the fire button you will only see --- in the display.

Push the button 6 times for menu 4.Uc (voltage check) here you can check the combined voltage of both batteries.
Once you see 4.Uc wait 2 seconds till you see the actual voltage of your device example, fully charged will display 8.4v

Push the button 7 times for menu 5.dS (display showing) this is what the display will show when you press the fire button to vape.
When you see 5.dS wait 2 seconds then you will see and have 3 options to choose from: do (display output)......dA(diaplay atomiser or resistance).....dv (display voltage) dv displays "real time" underload voltage as you vape when pushing th fire button.

Push the button 8 times for menu 6.Lo (light on/off) this will turn on/off the blue led in the fire button and the 10 second cutoff light warning.
When you see 6.Lo, wait 2 seconds till L.on, then press the fire button to change it from L.on to L.of (light on, light off)

After making your adjustments in any menus wait 2 seconds for the display to go black and your settings have been saved ....vape away.
**Reminder and word of advice***** Your new VMAX is set to start at 5 volts everytime you change batteries, go to menu 1.Uu at cycle the voltage back around to 3v to start out then adjust upwards according to your prefference,trust me when I say...the voltages your used to with other mods might not be what you need on the VMAX, I usually vape at 4.3-4.5v on my new 3.2amp lavatube with a 3ohm boge, with the Vmax Im at 3.4-3.8 and Im getting more than enough vapor and total satisfaction. Those that dont have a Vmax yet dont have a clue to what Im talking about and are probably doubtful,but those that do have a VMAX know EXACTLY what Im talking about. This mod WILL suprise you at lower voltages, and really you dont have to go reall high with this device and your saving your battery life by vaping in the lower voltages. My AW IMR 18350's are lasting me from 4am when I get up everyday till 7 or 8 pm sometime longer with vaping fairly heavy.

I hope this helps present VMAX owners and future owners to come,I tried to make these instructions easier to read than the PDF file smoktech sent me,if anyone needs any further help or tips just PM me and I'll do my best to help you any way I can.
Take care everyone ....and be safe... Puff I got your PM, I hope this helps ya out a bit. ...............J
 

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
Agreed 100%. There is some psychology going on with 90% of new vapers that we all forget when we make recommendations about our favorite PVs. The way I see it, in most cases I consider it a triumph when someone skips the cigarette look-alike in favor of a simple larger battery PV, like an eGo or kGo or whatever. Often, it's a victory if you can persuade them to skip the worst of the cig types and buy a Volt. At least they have half a chance. There are always the newbs who are technically oriented, prepared and well researched. Generally, you can tell who they are by the questions they ask, or don't ask. To recommend a Provari to someone who asks what an atty is, is folly, IMO. I'd love to be able to give them a long dissertation or seminar, but that's unrealistic and generally a fools errand. If they were receptive to it, they'd have had a good start on it already. Or, they'd continue the dialog and ask more questions, showing signs of independent study.

I'm looking for the inevitable price drop on the Vmax. It's just priced too closely to the Provari to overcome the Provari's reputation on the strength of some arcane technical specs that may or may not have real life benefits. How much difference will most people notice, or use, between a 3.5 and 5 amp limit? There are hardcore "heat-heads" that will appreciate it for sure but, for most people, it might not be that big of a deal. If the difference between a 2.5 and 3.5 limit didn't hurt the LT, I can't see the difference between 5amp and 3.5amps hurting the Provari. As for the better PWM, that strikes me as a subject akin to the arguments over headphones with a 20kHz frequency response vs. those with a 30kHz response. I'm not sure a significant proportion of users could ever tell the difference. Maybe in real life they could, probably they could, but PVs are mostly sold "on paper" and that could be a tough sell to someone relying on word of mouth or printed reviews. Probably as many people will be turned off by 2 batteries as will be attracted by a superior PWM algorithm.

That said, when the Vmax gets down to <2/3 the price of a Provari, all bets are off, assuming no significant reliability issues crop up in the meantime. Unless it starts failing left and right, I would buy one for ~$80 in a heartbeat.
 
Last edited:

John D in CT

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
1,576
860
Connecticut
Look at Digger's post again. How successful do you think you'd have been had he asked for a recommendation and you hit him with that wall of text?

Speaking of "wall of text" ...... TLDR.

Secondly - reported.

***

"I'd love to be able to give them a long dissertation or seminar, but that's unrealistic and generally a fools errand". Real nice. C'mon man, I can hear you - I'm sitting right here.
 
Last edited:

John D in CT

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
1,576
860
Connecticut
Thank You Ms. Class! WE ALL have ONE thing in COMMON here in the ECF and that is the SATISFACTION and ENJOYMENT of VAPING and staying away from those HORRID ANALOGS! NOT ONE PV DEVICE is better than the other PERIOD! ENOUGH SAID...


Freddie, I really can fully understand the spirit in which you said that, but I can't at all agree with it. A ProVari is better than an e-Power or a kGo, for example.

And if the discussion could be kept civil, I think we could freely discuss the relative merits of various devices without the need for moderators to step in. "Nuff" will be said when everyone is off stinkies and enjoying the best vape that they can have, and/or want to have. That said, there are many who don't even know what they want, except to have a fine vape and to stay off stinkies. I just like to give people as much information as I think they need to make a good, informed decision.
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
Why mess with that knock off? I would rather pay the extra money and buy a Provari that has a proven track record.. Plus if you have a problem with it, you cant beat Provapes customer service... Made in the USA.........
Very TRUE my friend, but just like the Provari when it first came out everybody gave it a chance and that actually goes for any PV! I NEVER recommend any one particular PV to anyone because what works for me, may NOT work or satisfy the needs of others! The Provari is a VERY beautiful device hands down period and yes the customer service warranty is OUTSTANDING, but I'm just giving the VMAX a chance like everyone did the Provari! The ONLY downfall is NO warranty as you stated, but I am willing to take that chance! I RESPECT your view and opinion very much and in fact I RESPECT you even more because you didn't BASH the device! In fact the VMAX is a nice device and performs outstandingly and I do worry about it malfunctioning, but like I said I am willing to take that chance! If and when it does go bad GUARANTEED I'll be getting the Provari! :D
 
Last edited:

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
[/B]

Freddie, I really can fully understand the spirit in which you said that, but I can't at all agree with it. A ProVari is better than an e-Power or a kGo, for example.

And if the discussion could be kept civil, I think we could freely discuss the relative merits of various devices without the need for moderators to step in. "Nuff" will be said when everyone is off stinkies and enjoying the best vape that they can have, and/or want to have. That said, there are many who don't even know what they want, except to have a fine vape and to stay off stinkies. I just like to give people as much information as I think they need to make a good, informed decision.

John, I don't think anyone has been discussing the relative merits of any PVs. I know I haven't. I freely concede that the Vmax is a better device than any of the *Gos and likely better than the Provari. I've not seen anyone say anything to the contrary. There has been some discussion of the Vmax vs. Provari, but it seems to have been quite civil. And, as far as I can tell, the only need for moderators to step in is at your behest. My entire point has only been that no device is THE BEST device for everyone, especially every newbie. You seem to disagree. Fine. I'm willing to leave it at that. Our disagreement has never been about what device is better than what other device, despite some other poster's efforts to portray it like that.
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
[/B]

Freddie, I really can fully understand the spirit in which you said that, but I can't at all agree with it. A ProVari is better than an e-Power or a kGo, for example.

And if the discussion could be kept civil, I think we could freely discuss the relative merits of various devices without the need for moderators to step in. "Nuff" will be said when everyone is off stinkies and enjoying the best vape that they can have, and/or want to have. That said, there are many who don't even know what they want, except to have a fine vape and to stay off stinkies. I just like to give people as much information as I think they need to make a good, informed decision.
What I'm trying to say bro is that an individual can enjoy a 510 device and they would be happy at that level! I know several of my friends that are happy with their regular 510 devices and think mine is TOO much for them! In that they are happy and satisfied with what they have and enjoy VAPING like we ALL do! :D
 

John D in CT

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
1,576
860
Connecticut
Hmmm.. this is beginning to get a little.. disturbing. If you're vaping a 2ohm carto at 3v, that would be 4 and a half watts and shouldn't be a very "beastly vape" In fact, it should be the equivalent of a 3.7 device with a 3ohm carto. Are you using a voltmeter to test to see if the voltage is right? I was sorta interested up until this point.

And there's a guy who keeps begging for someone to tell him how to adjust his voltage.. how hard can it be? Is it like... stuck at 5v? I'm really really not trying to dis something but these are valid concerns that would affect the end user here. What I'm saying .. if I want to set my device at 3v with a 3ohm carto.. I want it to feel like I'm vaping a 3ohm carto at 3v.. not that I'd want to vape at 4 and a half watts but there are some that do. 3v should not feel like 5.5v and if it does..how can that be a good thing?

**Reminder and word of advice***** ... trust me when I say...the voltages your used to with other mods might not be what you need on the VMAX, I usually vape at 4.3-4.5v on my new 3.2amp lavatube with a 3ohm boge, with the Vmax Im at 3.4-3.8 and Im getting more than enough vapor and total satisfaction. Those that dont have a Vmax yet dont have a clue to what Im talking about and are probably doubtful,but those that do have a VMAX know EXACTLY what Im talking about. This mod WILL suprise you at lower voltages, and really you dont have to go reall high with this device and your saving your battery life by vaping in the lower voltages. My AW IMR 18350's are lasting me from 4am when I get up everyday till 7 or 8 pm sometime longer with vaping fairly heavy.

Donnah, et al - I really can see how "beast" and "powerhouse" might seem like meaningless hyperbole, but as VAP said (and could probably explain the science behind), there is something about the way this device uses pulse width modulation that just really seems to be particulary effective at "convincing" a coil to excite the juice.

I've said, in this thread or another, that the current flow sounds a lot like the crackling of a MIG welder, if you've ever heard one in operation. A crackling of electricity, in this case caused I think by the rapid on-off-on-off cycling that the device performs as it powers the coil. It's not just a continuous flow of current, it's like a little jackhammer. Another way to look at it might be to use the example of an air-powered impact wrench, like the guys at the tire shop use on the lug nuts that hold your wheels on. An impact wrench gives many many little "smacks" in rapid succession, each of which exerts less force than would be required to apply a continuous, steady force that would be required to, say, loosen a particular nut, but when repeatedly put together one after the other, do the job wth individual blows of lesser force.

As VAP said, I think that you have to try it for yourself to see what this "phenomenon" is all about, but IMO - see it you will. And it's difficult (impossible?) to use of plain old voltmeter to accurately measure a PWM'ed current flow; the digital readout just jumps all over the place as the current rapidly fluctuates.

And I am now more eager than ever to get a ProVari V2 to see if its PWM works in a similar fashion.
 
Last edited:

VAPNJ350

Super Member
ECF Veteran
Verified Member
Mar 26, 2011
733
941
50
Jacksonville,FL.
You guys takes this for what it is....Please. Strictly my opinion by experience. I've converted quite a few people off analogs,too many too count and honestly I've lost track. But many want that "cig look a like" ecig at 1st. I have a pcc kit that I give all the people I convert to try at 1st. As soon as their ready ( a couple days or week at most) for something more, I get it back and set them up with a 900maH ego kit with BOGE 2.0's or a Dual Coil 1.5's. I've had about a 90% success rate with this type of attack,it seems to work pretty well,is it 100% success, no...but 90%...I'LL TAKE IT !! Just like when we started it was a learning experience. All we can really do is present good information and personal testimony, the rest is up to the individual BUT ALWAYS BE SUPPORTIVE AND HAVE A POSITIVE ATTITUDE NO MATTER WHAT THEY DECIDE OR CHOOSE. Most new vapers will crawl their way up to a V V type of mod, just try to be supportive in the mean time. We all want to try and save the newb time and money however we can, just try to keep in mind all the things you yourself were thinking the 1st time you got a hold of a ecig and all the questions in your head. Everyone please remember were ALL on the same team here. Take care and happy vaping everyone............. :vapor: J:vapor:
 

John D in CT

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
1,576
860
Connecticut
What I'm trying to say bro is that an individual can enjoy a 510 device and they would be happy at that level! I know several of my friends that are happy with their regular 510 devices and think mine is TOO much for them! In that they are happy and satisfied with what they have and enjoy VAPING like we ALL do! :D

Freddie, also my bro: :)

Check it out, dog - let's say that for the sake of "argument", for lack of a more palatable term, that we stipulate that a superior vape can be had with, say, higher volts and higher resistance than the converse.

So stipulated, your friends who are happy and satisfied are not getting the best vape they can get. I suppose I just keep coming back to "why not just get the best vape you can get?", especially if you're going to be in this for the long haul.

We are not talking about a huge sum of money, and again, $128 to $159, batteries not included, for a ProVari V2 of a VMax, pales in comparison to the multi-thousands per year that smokers spend, and ex-smokers spent, on stinkies.

I just got another friend off stinkies about a month ago. He used a Joyetech eGo-C for a couple of weeks, then ordered a V2 last week, once I finally figured out for myself that VV is the way to go. Of course, he loves it.

Another friend, John G., was just here with a friend of his. He has been vaping for about a week, is off stinkies, and already knows that he wants VV, and why. His friend, who knew zero about vaping before walking in here this morning, now completely understands why variable voltage has certain undeniable advantages, and will be giving me $250 so I can get her a VMax and as many tanks, cartos, and juice as that will buy. Will she be styling? Yes, she will. Is she totally ...... off that she wasted $120 on a Greensmokes kit, which would have just about bought her a VMax? Yes, she is.

I think it's self-evident that mentoring is a huge part of getting a beginner off to a running start. VMax + DCT tanks + Boge 3.0 cartos + great juice = running start.

I was able to demonstrate a Joyetech eGo, a Smoktech e-Power 14650, a Smoktech Woo, and then the VMax. A two-minute explanation of how coils work, what watts are, how watts are related to voltage and resistance, and why it's an advantage to be able to vary the voltage, and she made the decision for herself that she wanted variable voltage.

I think that maybe it was the "Goldilocks" analogy that really brought it home for her. To recap: Goldilocks was able to optimize her bed and chair hardness, and her porridge temperature until it was, in her estimation, "just right". And isn't that what we'd all like to have, if at all possible - something that's "just right"?

***

And just to be clear; of course I see the advantages of having more than one PV, and will always use a smaller device from time to time, and not the VMax 100% of the time. But I think that the "stealth" PV should take a back seat to the really good one that should be acquired first IMO.
 
Last edited:

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
You guys takes this for what it is....Please. Strictly my opinion by experience. I've converted quite a few people off analogs,too many too count and honestly I've lost track. But many want that "cig look a like" ecig at 1st. I have a pcc kit that I give all the people I convert to try at 1st. As soon as their ready ( a couple days or week at most) for something more, I get it back and set them up with a 900maH ego kit with BOGE 2.0's or a Dual Coil 1.5's. I've had about a 90% success rate with this type of attack,it seems to work pretty well,is it 100% success, no...but 90%...I'LL TAKE IT !! Just like when we started it was a learning experience. All we can really do is present good information and personal testimony, the rest is up to the individual BUT ALWAYS BE SUPPORTIVE AND HAVE A POSITIVE ATTITUDE NO MATTER WHAT THEY DECIDE OR CHOOSE. Most new vapers will crawl their way up to a V V type of mod, just try to be supportive in the mean time. We all want to try and save the newb time and money however we can, just try to keep in mind all the things you yourself were thinking the 1st time you got a hold of a ecig and all the questions in your head. Everyone please remember were ALL on the same team here. Take care and happy vaping everyone............. :vapor: J:vapor:
You hit it DEAD ON my brotha! :D

BTW...I had NICOTINE BUZZ off of it...LMAO! I haven't even touched it since last night! :D
 

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
John, in all those examples you gave, you were engaging in a level of personal mentoring that just can't be done on a message board unless you develop some kind of prolonged and personal one-on-one rapport with a faceless newbie. That's the problem. It's perfectly fine to demonstrate, tutor and recommend an APV to a newbie when you have the opportunity to get their undivided attention for a while, and even give them some hands-on experience. When you attempt to achieve the same thing without the huge factor of mentoring, most times you'll fall flat, confusing the hell out of them and sending them packing with their arms thrown up in frustration.

So, I'm going to modify, really clarify, my opinion a little. The Vmax is a fine recommendation for a newbie when the opportunity exists for some one-on-one mentoring. There is nothing inherently wrong with the device that would preclude its use by a new vaper. But when the information necessary to appreciate the device is mixed in with all the other recommendations for everything from a Blu to a Darwin, it becomes a confusing jumble that has almost no chance of success and is more likely to be counter-productive. Newbs just don't have the knowledge, and most lack the inclination, to sort out the wheat from the chaff in that type of environment.
 

VAPNJ350

Super Member
ECF Veteran
Verified Member
Mar 26, 2011
733
941
50
Jacksonville,FL.
Sailor, scroll back a few pages, I kinda touch base on the scope figures I got off my chrome VMAX. But to kinda give you a idea of how this PWM is working without going all indepth crazzzy. This particular PWM is going a bit over the voltage set output. Where most all PWM devices has the highest voltage seen to be what it is set at the VMAX goes well beyond that. Example:
Say you have the voltage set at 5V, The PWM is letting the voltage go upwards of 5.8V and down to 4.3 at the lowest but coming out on top with a average 5.3-5.5V not loaded. The Vrms comes out right at 5-5.2v underload with about a 70% duty cycle at 714Hz. This may seem like german to most but hopefully it helps sailor out a bit. All in ALL, this device is VERY impressive to say the least,especially when I was expecting a real P.O.S. Having all subpar quality from chipsets to build,needless to say,it's FAR from what I expected. And yes I do have a Provari V1 and V2,both of which have been collecting a little dust since I got the chrome VMAX around a month ago. I still love my Vari's and will maybe even still use the V2 at certain times, but for now, my VMAX's do everything I ask them to do no mater what it is,3ohm single coil,1.5ohm DC, tanks, everything without hesitation or error. It's just that simple. I honestly don't see myself buying another mod, I'm not a collector and I don't like to waste money on something thats going to do the same job as what I already have,I just can't justify the means. It just works.
 
Status
Not open for further replies.

Users who are viewing this thread