- Status
if I had to guess... it's a tankless electrical water heater... If it were me, I'd get gas, and a battery backup. That way, if the power goes out, you can take a hot shower and step out to freezing cold.
That is a geothermal heat pump.
ConGrats on Vape Mail
I also learned just now, that Koopor's website is broken beyond... hmmm, I don't even know how to describe it.
Impossible to log in, gives an unknown error, impossible to verify device, does just nothing...
On the bright said, the Nitecore passed verification, wich is nice, since I ordered it from AliExpress, without retail packaging, for something like $13.
EDIT:
Lol, while Koopor's website is pretty much unfunctional. I passed the validation on SMOK's website without a problem, haha!
really hope Smok gets it together on this - after the debacle with the m80 plus TC being a bust, they really need to step up on this one or they will be in some deep doodoo...I was just on SMOK Technology Co.,Ltd | Facebook
And I don't think it was the users fault
There's quite a few post about people having problems with their X Cube II
Here are just a few Quotes,
There's a ton of contest questions too, but Not one reply from anyone from SMOKtech
- tank...the o-rings are too small and of crappy construction...the top doesnt stay closed...the tank leaks thru the airflow control ring.
- the sillicon rings of the atomizers are NO good development. Its a standard ring for a 50cent atomizer and too NARROW, thats why its not sealed and dripping.
- RBA leaking
- For those with LEAKING issues with the TFV4 > look at the inside of the base , you'll see an inkeeping but NO rubber ring. I had also a lot of leaking and put in the base a rubber ring. So far no leaking smile emoticon
- after putting in fully charged batteries now shows 'ERROR: NO SECRET -KEY
- Just done the update to 109 using the new beta tool, said it was finished but then came up with ERROR: no secret key
- Today updated the firmware to the x cube 2. All successful. When you turn on error has issued "no secret key". And now not working.
- The resistance won't stay stable.. It wildly jumps from ohm to ohm no matter what atomiser
- Just updated to v 1.09 firmware on my xcube ii my titanium setting has disappeared even though it is upgraded in the bec app also there is no stainless steel option.
Reddit has it share of comments like these ones too
Cheking my email and bump into you win Smok machine Best day ever!! Automaticly pulled order on 4x25r samsung and single, double rba for tfv4. Tnx to all who made this happen and good luck to all of you!!!!! Happpyyyy!!!!!!!!!!!! 
Best day ever!! Automaticly pulled order on 4x25r samsung and single, double rba for tfv4. Tnx to all who made this happen and good luck to all of you!!!!! Happpyyyy!!!!!!!!!!!!
congrats, Iken!
Cheking my email and bump into you win Smok machine
Congrats!
ConGratsCheking my email and bump into you win Smok machine
When did you get the email? Did you only just now check your mailbox or was SMOK late sending it I'm wondering?Cheking my email and bump into you win Smok machine
(I'm still hoping to magically find a 'you won a kit' email lol)
I was just on SMOK Technology Co.,Ltd | Facebook
And I don't think it was the users fault
There's quite a few post about people having problems with their X Cube II
Here are just a few Quotes,
There's a ton of contest questions too, but Not one reply from anyone from SMOKtech
- tank...the o-rings are too small and of crappy construction...the top doesnt stay closed...the tank leaks thru the airflow control ring.
- the sillicon rings of the atomizers are NO good development. Its a standard ring for a 50cent atomizer and too NARROW, thats why its not sealed and dripping.
- RBA leaking
- For those with LEAKING issues with the TFV4 > look at the inside of the base , you'll see an inkeeping but NO rubber ring. I had also a lot of leaking and put in the base a rubber ring. So far no leaking smile emoticon
- after putting in fully charged batteries now shows 'ERROR: NO SECRET -KEY
- Just done the update to 109 using the new beta tool, said it was finished but then came up with ERROR: no secret key
- Today updated the firmware to the x cube 2. All successful. When you turn on error has issued "no secret key". And now not working.
- The resistance won't stay stable.. It wildly jumps from ohm to ohm no matter what atomiser
- Just updated to v 1.09 firmware on my xcube ii my titanium setting has disappeared even though it is upgraded in the bec app also there is no stainless steel option.
Reddit has it share of comments like these ones too
And 99% of those are still - User error
Tanks need people that can look and make sure they are set up properly.
Ripping the Glass from a silicone gasket is not smart. Hot water or vodka soak. Glass is not polished and will bite to seal. Most Glass tanks are NOT polished.
Error Code issue is a non issue and steps are explained on Smok's site.
X CUBE II V1.091 firmware upgrade guide--SMOK® Being with you for all great vaping time!
Congratulations!Cheking my email and bump into you win Smok machine
And welcome to ECF!
Good morning everyone & congrats to the latest winners..........
Bringing this forward
Smok email winners known to date:
VapeBritain
jpbavaro
Rob Cason
John Shalin Arricivita
Nokosa
boggy18
OBEYbryant
hyds
Dunder Mifflin
jander541
luxury
Jaysen B. VIF coming soon
Jessejames224
elpsycongroo
milo walker
amagos
LowVoltSparky
VapingSam
Ariesvape
@Iken 2015
Congrats!
Smok email winners known to date:
VapeBritain
jpbavaro
Rob Cason
John Shalin Arricivita
Nokosa
boggy18
OBEYbryant
hyds
Dunder Mifflin
jander541
luxury
Jaysen B. VIF coming soon
Jessejames224
elpsycongroo
milo walker
amagos
LowVoltSparky
VapingSam
Ariesvape
@Iken 2015
Congrats!
WELL PlAYED! Romano, or should I say "Mr. Cheese".
Testing after the latest firmware upgrade, with actual temp reading and what not.
The actual testing starts at around 07:20
The actual testing starts at around 07:20
I ordered a Sigelei and herakles from them (sing post) August 3 waited till the 26th good luck!Woot!
Picked up my first ever vapemail from the post office today!
Now I can stare at my Nitecore D2 and Koopor Mini, while Fasttech decides to send me my Uwell Crown, which was ordered like almost two weeks ago.
Well, it's not really a problem with shipping. When I ordered, it said that the tank and coils would ship out in three days. First it took a day for them to process the order, then for four days nothing happened. On the fifth day they shipped out my batteries, that were in the same order, and split off the tank/coils under separate order, saying that they are restocking, which takes from 1 to 5 days. Soooo... those five days have passed now as well. With the hollidays they are having, I'm damn sure it won't move until Tuesday at the earliest...
I don't know if any of you were in here yesterday (I think) when we were talking about the various black holes that our vape mail disappears into when it is shipped via USPS. One of them is Opa Locka Florida. Well I have to eat my words today. Shipped 09/02 From Miami Fl. rec'd today in Reedley Ca. My jaw is still dragging on the ground. Never ever ever got anything that fast before.
Cheking my email and bump into you win Smok machine
Congrats!
- Status
Similar threads
