Ended Smoktech giveaway! 250 Cloud Machines to win...

[Daddy]

your right in your thinking in this subject as I had no idea that the demand was so high on the item. it is my first win and I was not complaining at all. just used info I had

I don't think they anticipated the demand either, which is a good problem for a business to have but none the less it still is a problem.

 

[danjaman]

I had an M80 die too. I was lucky enough my B&M replaced it for free, it was only a month old or so. The repaired one should be back any day now and I'm going to buy it back from him. Really love that little box mod. Just so you know he told me if you never run it down below 70-80% battery life you shouldn't ever have issues with it. Pretty much try to keep it topped off as much as possible he says.

I had one before this one, it worked perfectly fine for the first day, I went to charge it on the evening and the charger port didn't work!
I tried a whole bunch of different plugs and cables, but no luck.

I sent it back the next day, had a load of issues with it going to the wrong address, and ended up getting a replacement about 2 weeks later.

Ever since that, I didn't have any problems for months until a few weeks ago I screwed an Atty down too far and pushed the pin right in with a massive click, pulled it out, all good until the resistance started jumping around everywhere, and now the charge doesn't last too long now, but being disabled and mostly house/armchair bound it doesn't affect me too much.

Other than that it's been quite good, and still better than the equivalent istick 50w.

Sent from my XT1032 using Tapatalk

 

[Daddy]

I just got a call from my local B&M, they gave him a credit for my broken one instead of giving him replacement parts. So I'm out of luck. Was looking forward to having two. I might just buy another one.

I had an issue with the resistance jumping ALL over the place from 2.2 ohms to .15 where it was suppose to be. My problem was the coil I think. Are you using the TFV4? I had an issue with the quad coil jumping all over the place and come to find out it was because I burnt it up vaping to hard with thick juice. I thinned my juice out and the problem went away.

 

[danjaman]

I just got a call from my local B&M, they gave him a credit for my broken one instead of giving him replacement parts. So I'm out of luck. Was looking forward to having two. I might just buy another one.

I had an issue with the resistance jumping ALL over the place from 2.2 ohms to .15 where it was suppose to be. My problem was the coil I think. Are you using the TFV4? I had an issue with the quad coil jumping all over the place and come to find out it was because I burnt it up vaping to hard with thick juice. I thinned my juice out and the problem went away.

Not got a TFV4 yet, I've been having the problem on all of my atty's, even ones that I know for a fact are working fine, I think it's something to do with the 510 pin, I have to pull it up with tweezers to get it to make contact sometimes.

Sent from my XT1032 using Tapatalk

 

[Lomka]

I think fine packaging means that they had to individually pack all 300 kits and make sure that the packing was neat and safe.

 

[Dconnor]

I think fine packaging means that they had to individually pack all 300 kits and make sure that the packing was neat and safe.

You mean as opposed to the standard packaging of a Manila envelope and duct tape?[emoji87]

 

[pbanj]

You mean as opposed to the standard packaging of a Manila envelope and duct tape?[emoji87]

I have gotten some from China that look like bombs. You ever see that warning sign at the post office about suspicious packages? Lol

 

[crxess]

patiently waiting

 

[Midnightalaskan]

patiently waiting

Definitely waiting.... Although I'm not too sure about the patiently part. Lol

 

[gofishtx]

Definitely waiting.... Although I'm not too sure about the patiently part. Lol

Waiting anyway. What happened to Madvapes receiving them to ship out. Sorry I have been busy in the other contest.

Never mind I went back a few pages and answered my own question, I have no problem waiting, it's free and I had fun in the contest. I have other mods to use and I can wait. Plus it gives me something to look forward to.... surprise vapemail.... Yippee...

This one will be a good fogger for home use Now back to the other contest. I can use that one as a stealthy work vape. I really need a durable pocket sized mod now

 

[pbanj]

Waiting anyway. What happened to Madvapes receiving them to ship out. Sorry I have been busy in the other contest

No one knows at this point. Madvapes said they had them and just needed the names but then smok said they didn't send them anything

 

[jseah]

Waiting anyway. What happened to Madvapes receiving them to ship out. Sorry I have been busy in the other contest.

Never mind I went back a few pages and answered my own question, I have no problem waiting, it's free and I had fun in the contest. I have other mods to use and I can wait. Plus it gives me something to look forward to.... surprise vapemail.... Yippee...

This one will be a good fogger for home use Now back to the other contest. I can use that one as a stealthy work vape. I really need a durable pocket sized mod now

What's funny is that if you go to Madvapes website, they don't even show them even carrying the XCube 2, let alone having any in stock.

 

[jseah]

Depends on how you define cost, I guess. The black tank/mod are on back order or pre order everywhere. I have not seen any vendor online or B&M with them in stock. I'll admit I haven't looked real hard either but I have seen a few people here or there asking for them. I was at my local B&M store a few days ago and THREE people came in asking for the black set up. Store owner has not received his shipment yet and told them it would likely be 2 or 3 weeks before he got any - he later told me he did not have the funds nor business to compete with the online retailers so he let them all get their shipments before getting his own - he said SMOK's rep he uses required a $10,000 order to guaranteed being filled and that was just to much for him.

I too think the likely issue is that the product was more successful then they ever imagined and fell behind on supplies. They then made a business decision to fill the orders of paying customers and put us on the back burner, which I completely understand. But it all speculation. They know the winners and the prize will arrive when it arrives, and not a day sooner!

Actually, Misthub has the black in stock. Just ordered one this afternoon and got the shipping notification and tracking number this evening.

 

[The Eciginator]

Vape Royalty has the black in stock too.

 

[dcfluegel]

Got a black one in today from sweet vapes... It's a beaut!

Sent from my SM-N900V using Tapatalk

 

[Croak]

My black X Cube is out for delivery, unexpectedly. Seriously, figured it was still a week out, since it was just cheap $3.00 registered mail coming from Malaysia, and didn't ship until the 18th.

My birthday was yesterday, so this is a nice only-slightly-belated gift.

 

[Daddy]

My black X Cube is out for delivery, unexpectedly. Seriously, figured it was still a week out, since it was just cheap $3.00 registered mail coming from Malaysia, and didn't ship until the 18th.

My birthday was yesterday, so this is a nice only-slightly-belated gift.

Happy belated Birthday!

 

[spartanstew]

Patiently waiting here too, though I'm surprised this thread hasn't been moved to the lounge yet.

 

[Croak]

If anyone is still wanting to pick up the TFV4 dual coil RBA (TF-R2), there's a few left here at $4.99

https://smogdistro.com/shop/smok-tf-r2-rebuildable-coil/

Also, Goliath V2's for $14.99, one hell of a deal, and colored replacement glass (fits both the Goliath V2 and Goblin Mini) for $0.99 each.

 

[Opinionated]

My black X Cube is out for delivery, unexpectedly. Seriously, figured it was still a week out, since it was just cheap $3.00 registered mail coming from Malaysia, and didn't ship until the 18th.

My birthday was yesterday, so this is a nice only-slightly-belated gift.

Happy belated birthday to you!