Ended Smoktech giveaway! 250 Cloud Machines to win...

[Shawn Hoefer]

How is everyone getting on with the temp control on nickel?

Sent from my XT1032 using Tapatalk

What does everyone think the best build is on the rebuildable decks? I haven't tried them out yet, but I purchased the single and dual coils and wanted to poll before I started tinkering. (c;

Don't think I'll ever run Ni200 on the Xcube... or Titanium. With the option to use the MUCH less expensive, much more user friendly, much more durable Stainless Steel (use 430), I'm a SS user for life. Not only is the TC very easy to use on SS, if you get bored with SS, the resistance is high enough, you can run SS on a mech or in Wattage mode.

I've got a SS430 build on the single coil deck reading in at .9 and it's a nice warm, dense vape at 440F. Ni200 always seems cool at that temp...

 

[Dconnor]

How is everyone getting on with the temp control on nickel?

Sent from my XT1032 using Tapatalk

I like it on my STM on the XCube but the TFV4 is no bueno for me. Been using the XCube with a PlumeVeil and enjoying it that way.

 

[Shawn Hoefer]

I like it on my STM on the XCube but the TFV4 is no bueno for me. Been using the XCube with a PlumeVeil and enjoying it that way.

Why you no like TFV4?

 

[Dconnor]

Why you no like TFV4?

I tried the stock triple coil, and the single coil RDA. Overall, I find it too airy for me, and I have had leaking problem at filling. When I fill I will get a decent amount amount of leakage, I clean it up and vape the rest of the tank with no leakage. On the next fill up, same thing again. Can't really figure out what's causing it, but combine that with the airflow I think I am kinda done.

 

[Kprthevapr]

I like it on my STM on the XCube but the TFV4 is no bueno for me. Been using the XCube with a PlumeVeil and enjoying it that way.

I use mine with a derringer on it

 

[The Eciginator]

I tried the stock triple coil, and the single coil RDA. Overall, I find it too airy for me, and I have had leaking problem at filling. When I fill I will get a decent amount amount of leakage, I clean it up and vape the rest of the tank with no leakage. On the next fill up, same thing again. Can't really figure out what's causing it, but combine that with the airflow I think I am kinda done.

You're overfilling it, only fill till the liquid reaches the top of the glass. And you can close the air holes as much as you like to adjust the airyness!

 

[Dconnor]

You're overfilling it, only fill till the liquid reaches the top of the glass. And you can close the air holes as much as you like to adjust the airyness!

I will give it another shot.

 

[danjaman]

You're overfilling it, only fill till the liquid reaches the top of the glass. And you can close the air holes as much as you like to adjust the airyness!

I fill mine up to the fill hole, haven't had any leaking issues at all.
Apart from earlier today when I forgot to mop up spillage on the white rubber fill gasket, closed the lid and it leaked out of the hinge on the top surface next to the drip tip.
I'm loving the triple coil, I can't believe it's still going strong, I've pumped more than quarter of a litre through it so far.

Sent from my XT1032 using Tapatalk

 

[danjaman]

I use mine with a derringer on it
View attachment 499383

Look at that massive box with that teeny weeny derringer with that huge drip tip!
Now that's a whole bunch of polar opposites right there!

Sent from my XT1032 using Tapatalk

 

[danjaman]

Well, it's 4.40am and my bedtime, I'll catch you all again soon!

Sent from my XT1032 using Tapatalk

 

[The Eciginator]

I fill mine up to the fill hole, haven't had any leaking issues at all.
Apart from earlier today when I forgot to mop up spillage on the white rubber fill gasket, closed the lid and it leaked out of the hinge on the top surface next to the drip tip.
I'm loving the triple coil, I can't believe it's still going strong, I've pumped more than quarter of a litre through it so far.

Sent from my XT1032 using Tapatalk

Still the best practice is to fill till the juice reaches the steel, then yer safe even if it's tilted for a while!

 

[Dconnor]

Still the best practice is to fill till the juice reaches the steel, then yer safe even if it's tilted for a while!

I am getting leakage through the AFC every time I fill no matter which coil.

 

[jseah]

I am getting leakage through the AFC every time I fill no matter which coil.

I've gone through 6 or 7 tankfuls of juice and not a leak from the AFC. Of course I'm using a pretty high VG juice and I'm also using the nickel air coils.

 

[Dconnor]

I've gone through 6 or 7 tankfuls of juice and not a leak from the AFC. Of course I'm using a pretty high VG juice and I'm also using the nickel air coils.

I'm going to play with it some more. Really was excited to get this tank. Was getting frustrated so put it down for a while. Will try the Nickel air coil. I tried the triple that came with it and a few different ni200 builds on the RDA1.

Edit:also I'm running 65/35 vg/pg.

 

[Brkdnc]

Mine hasn't had a leak yet, still running the tri-coil it came with and been through I don't know how many tank fulls of liquid. I have been filling mine with a syringe which makes it super easy to do

 

[jseah]

I'm going to play with it some more. Really was excited to get this tank. Was getting frustrated so put it down for a while. Will try the Nickel air coil. I tried the triple that came with it and a few different ni200 builds on the RDA1.

Edit:also I'm running 65/35 vg/pg.

All the juices I am using are a minimum of 80 VG.

 

[danjaman]

All the juices I am using are a minimum of 80 VG.

All of mine are 90-95% VG, no leaks yet.

Sent from my XT1032 using Tapatalk

 

[Kprthevapr]

I am getting leakage through the AFC every time I fill no matter which coil.

Take the bottom oring, the white one, make sure it's in correctly. That's what was causing mine to leak out of the air holes
Hope this helps

 

[Vapin Dave]

I tried the stock triple coil, and the single coil RDA. Overall, I find it too airy for me, and I have had leaking problem at filling. When I fill I will get a decent amount amount of leakage, I clean it up and vape the rest of the tank with no leakage. On the next fill up, same thing again. Can't really figure out what's causing it, but combine that with the airflow I think I am kinda done.

9.5 times out of 10 it is caused by improper wicking

 

[Dconnor]

9.5 times out of 10 it is caused by improper wicking

Thanks. Not helpful. I know how to wick