- Status
Got my magneto today. Initially I'm very impressed. It's a good looking mod. The threads are really nice - especially on the lockout. It's a little long - think ill use it with 18500 more than 18650. I was initially concerned about the non adjustable pin but it works with everything I have - Cisco spec atty, mini nova, igo-l, pheonix v5, cyclone clone, kanger protank and rsst.
All the way to the left is a ba gua...14500 stiffer magnets 120-140
second from the left is the atomo...switch is pure sex...180ish delivered iirc
The only other magnetic button mechanical I can think of the Nzonic by Mad Modz. This was what Sigelei tried to rip off with their whole 19a-z with the Nzonic cap, but only used the magnets to hold the battery in place. The Sigelei 19s have a regular bottom firing button with a magnet thrown in for nothing. I think they thought us stupid Americans would just read magnets and order 1! haha..
Got my logo less one yesterday.
IGO L works great on it.
Seems pretty well made and finish is nice.
Good size for holding with 18350, but 18650 is light saber mode IMO.
Switch seems a little "skritchish", I will lube it with graphite or mallox (what we sparky's call noalox).
BTW, a thin coat of noalox is much better for car battery terminals than those little green and red rings.
Lockring works smooth and so does other threads.
Overall I am very pleased for the price.
IGO L works great on it.
Seems pretty well made and finish is nice.
Good size for holding with 18350, but 18650 is light saber mode IMO.
Switch seems a little "skritchish", I will lube it with graphite or mallox (what we sparky's call noalox).
BTW, a thin coat of noalox is much better for car battery terminals than those little green and red rings.
Lockring works smooth and so does other threads.
Overall I am very pleased for the price.
Wanted to wait a bit before posting my thoughts. Had it for about a week now. I use my AGA-T2 on it, and I have the silicone seals for the tank so my center post has some room to drop down. My bottom post grommit was weak and it ripped so I put a new one on and held ok. I tore down my AGA and took the bottom cap and seated the pin on the device and rebuilt the aga around it and it is flush and flawless. Looks great, fells great. Buttery action. I have switch contact issues. Took it apart and lightly sanded the contacts. Still had issues. Finaly descovered that the cap locking ring wasnt fully seating causing a short. Fixed it and working well now.
Got my logo less one yesterday.
IGO L works great on it.
Seems pretty well made and finish is nice.
Good size for holding with 18350, but 18650 is light saber mode IMO.
Switch seems a little "skritchish", I will lube it with graphite or mallox (what we sparky's call noalox).
BTW, a thin coat of noalox is much better for car battery terminals than those little green and red rings.
Lockring works smooth and so does other threads.
Overall I am very pleased for the price.
Did you re-wrap the Igo? I find its factory dual coil setup, not real Mech friendly, not at 1.6. I also used noalox on all my mods and it helps
Sent from my phone with an identity crisis.
I'm hoping they'll sell the top cap separately for those of us that already have it.
Sent from my phone with an identity crisis.
1Ω coil of .6mm X .07mm Kanthal ribbon cold twisted then 3 of those hot twisted opposite direction 5.6 ohm ft, over a couple layers of 400 mesh, over boiled 100% cotton.
Scan of twisted twisted ribbons at 1200 dpi
Talk about surface area!
Hi Face i'm glad you made this post...I just got my magneto and i love it just was worried when i tried to put a carto in and didn't screw it in all the way and it didn't work. Then i looked up if it had any issues with the mod...and was like great i was ......... but a much happy Vaper now can't wait to build my AGA T2 Saturday... 1st. build wish me luck..
Mine just arrived - my Smok DCT's won't fire.
And it figures, now that we have ours, their releasing a new version with the adjustable pin. I'm expecting they will sell just the top cap for folks like us.
Sent from my phone with an identity crisis.
I got mine yesterday and it functions great with my ProTank, AGA-T ver 1, various cartos and clearos, as for the AGA-T series of rebuildables the fix is simple. The positive post on the AGA's is basically a floating pin, all you need to do is back the atty off a half turn remove the cap and push the post down, tighten the atty and you're good to go. For the price the Magneto is a must buy. Mine came from electronicstix.com.
Yes, I was able to use ego adapter and BCC also. I even got my Carto tank going with an adapter, but I am still very disappointed that SMOK would put out a product that is not comparable with their own accessories without additional adapters. I think they figured that out and changed the design with the next batch (now shipping with adjustable pin cap). But for those of us that had faith in SMOK and ordered early, we will apparently have to wait AND make an additional purchase to get the cap! I don't mind the wait, but I feel like having to purchase the cap is unfair.
- Status
Similar threads
