Are those actually from a mop ? And if so what other mods did you have to make to make this work? I have got to give this a try!
- Status
they are from a commercial dust mop, this one happened to be 4ft wide (and new), you have to dremel out the slot where the wick fits in tube and cut down the silicone cap that goes on top ,pretty much all
Thanks dwcraig1 
Used to use one of those to clean up a warehouse i worked at and know exactly where to pick one up. Now I just need to figure out how to make coils and i should be good to go.
Used to use one of those to clean up a warehouse i worked at and know exactly where to pick one up. Now I just need to figure out how to make coils and i should be good to go.I know this is a VmaX thread but I know some of you guys have the Pheonix RBA, I'm having an issue with it that has never happened before (and I think It may have something to do w/the airhole placement, or the size)..idk, but no matter what voltage I set I get a nice TH and alot of flavor but the vapor seems quite muted..Or did I make a bad coil? I suppose I should make another one..Any help would be appreciated
Make sure you're not drowning the coil.
If you fill in too much liquid, the vaper production won't be very good.
Don't know if this has been asked before, 235 pages.... yeah... to many to read.
When I first put in the batteries at full charge, it runs really hot for the first 10-15 vapes, and near the end of the battery it gets really light. I thought it wasn't supposed to do that. Every hit was the same kinda thing. It's the V2, starts out at 3v, if that makes a difference.
When I first put in the batteries at full charge, it runs really hot for the first 10-15 vapes, and near the end of the battery it gets really light. I thought it wasn't supposed to do that. Every hit was the same kinda thing. It's the V2, starts out at 3v, if that makes a difference.
What batteries do you use?
It does drop off near the end, as far as I know, but I personally don't notice it though (I use AW IMR highdrain 700mmAH 18350's)
Drippers dream atty is a big fail. Worst atty I ever used hands down.
GotVapes Bridgeless 3 Hole Drippers Dream Atomizer & Hybrid Fuse Atomizer Review - YouTube
I know this is a VmaX thread but I know some of you guys have the Pheonix RBA, I'm having an issue with it that has never happened before (and I think It may have something to do w/the airhole placement, or the size)..idk, but no matter what voltage I set I get a nice TH and alot of flavor but the vapor seems quite muted..Or did I make a bad coil? I suppose I should make another one..Any help would be appreciated
That thing uses wire and wick?
The coil should be directly over the central air hole,far enough from it so not to flood it and let air circulates;and dont strangle that wick!
It's spent, dead, over, c-ya. Don't worry about trying to fix it anymore, I'd be more worried if the vendor you bought it from is going to warranty it after you opened it up and put a solder to it. When it does what your describing theirs no fixing it,it's dead.
So is Ms.T's Vanilla Custard sweet or is it just another custard with no real genuine sweetness to it like all the rest. No juice is too sweet or ever sweet enough for me, I always end up adding my all VG liquid sweetener to almost everything, forget the horrid ethyl maltol that taste fake and all the other stuff out there that takes hours to dissolve and actually maKE YOUR JUICE SWEET, This all VG sweetener is all natural, INSTANT, and has a real genuine sweet taste to it. Not to mention potent, 1 drop per mL. Make all juices taste sooo much better...'IF' you like sweet that is.
Hey Buff...can you shoot out a link for the Mini Nova, thats the 1 I've been waiting on to purchase just to see all this good talk from you about this Nova, I'm hearing a lot of positive things about this 2.5 version so I guess it's time to try it out.
Link me Buffalo.......TIA
My ViVi SRT is really performing well without doing anything major, just a lot of little things. I'm curious why Smoktech didn't at least make it work a little better out of the box. Perhaps if they did make it work to it's potential their carto factory might have a big layoff or they knew we would just re engineer it anyway. Anyway mine is working superb, way better than expected, just cotton wicks and a little dremel work here and there, I have another one coming ina couple of days, perhaps I will do the stainless wick. @3.3 ohm now
Still testing so ?
Still testing so ?
Last edited:
Is there any interest in this mini Nova knockoff? 510 HV-CE5 Rebuildable Clearomizer 3.5 ohm, Single Pc - E Cig : Joye eGo & eGo-T | Boge Leo | Cartomizers | E-Liquid | Electronic Cigarettes | eGo Tank
Well,some guys have steady e-mails exchange with him and it appears that if the present situation persists,the DiD might not be available for a couple months --insert conspiration theories here--
Jim posted this on the DID thread yesterday:
http://www.e-cigarette-forum.com/forum/euro-suppliers/296166-new-genesis-type-atomizer-did-186.html
"STOCK UPDATE!
I should mention everything is on track on my Stock
PreOrders for regular DID will be shipped on 20 August
PreOrders for Mini DID will be shipped on 10-14 August
All SS spare updates will be available by the end of this week
Please allow up to 3 weeks for delivery after your order is shipped
also please allow up to week for order processing ans shipping notice"
Doesn't sound to me like he's got any supplier issues as rumored. Consider this my conspiracy theory insert
yeah,my "source" --insert laughable adjective-- posted that even with the pre-orders date due in 2 weeks active,the DiD shipped the same day anyways
I believe that's a Kanger T2 - different replaceable head configuration.
No juice is sweet enough for me too...toss me a link I would love some of that. Been using that fake tasting crap.
It's definitely not a Kanger T2, but I'm not sure exactly what it is either. This is a T2: Kanger T2 Rebuildable Clearomizer
The head on that thing looks like it's a cross between a Kanger head and a Vision head.
My it's the Kangerision E2 Novadustomizer ver. 3.75
Love my Vmax but Im having an issue. With my Vivi Nova tanks it keeps spitting out an f2 error. The Boges work fine, but everytime I put a nova tank on I get a F2 error and eventually an F1 error ---> reset device. I have tried moving the center post on the novas but it hasnt made a difference. Cant figure out whats going on. It will fire at random times but its sporadic. I submitted a ticket with madvapes about it, but thought someone here might have a solution before I have to send it back for a replacement.
Sounds like a bad coil head. I've used the mini and standard vivi on my VMax and had no issues. Thoes heads are mass produced and can have shorts in them even though they still vape causing problems with devices.
- Status
Similar threads
