I have all 3, Provari V1&2, and 4 VMAX's.....my Provari's are put away.....yes it is that good.
- Status
I have all 3, Provari V1&2, and 4 VMAX's.....my Provari's are put away.....yes it is that good.
Well my SS Vmax is on order from CCV. I was about to order a Lavatube, since I can not afford a Provari currently, and ran into this thread.
Looks like somebody sanded it with gravel haha. It would look nice with proper sanding and a polish. But maybe that's what they were going for "the rough look".
Vmax user settings:
UU- Power up 3 clicks
UD- Power down 4 clicks
SO- Power on/off 5 clicks
UC- Battery Check 6 clicks
DS - display information setting 7 clicks
*do- atomizer output voltage
*du- battery output voltage
*dR - atomizer ohm
LO- LED on/off 8 clicks
Power Adjust Up:
1. Press the button 3 times in a row until "UU" is shown on the display.
2. When UU is shown on the display, leave the button idle for 2 seconds. The display will change to show the last voltage selected.
3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc. When you reach 6.0, it will rotate back to 3.0 and go up again.
4. When you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
Power Adjust Down:
1. Press the button 4 times in a row until "UD" is shown on the display .
2. When UD is shown on the display , leave the button idle for 2 seconds. The display will change to show the last voltage selected.
4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc. When you reach 3.0, it will rotate back to 6.0 and go up again.
4. when you have reached the desired setting, leave the button idle for 2 second. The setting will be saved and VV will resume normal operation.
Power On/Off:
1. Press the button 5 times in a row until "SO" is shown on the display.
2. When UD is shown on the display, leave the button idle for 2 seconds. The display will show the last setting, on or off .
4. Each time you press the button the display will toggle between on/off.
4. When you have reached the desired setting, leave the button idle for 2 seconds. If you selected "OF" the VV will go into standby mode.
Battery Check:
1. Press the button 6 times in a row until UC is shown on the display.
2. When UC is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement.
3. The battery voltage will be displayed for 2 seconds, then the display will turn off.
Display Information Setting During Vaping:
1. Press the button 7 times in a row until DS is shown on the display,
2. When DS is shown on the display, leave the button for 2 seconds, the display will show the current setting: DO, DU or DR.
3. Each time you press the button, the setting will toggle among "DO" "DU" or "DR" ,
4. When "DO" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer working output voltage during your vaping;
5. When "DU" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery voltage during your vaping.
6. When "DR" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer resistance during your vaping.
LED On/Off
1. Press the button 8 times in a row until "LO" is shown on the display.
2. When LO is shown on the display, leave the button idle for 2 seconds, the display will show the current setting: ON/OFF .
3. Each time you press the button, the setting will toggle between on/off.
4. When you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
Short Circuit Protection:
The display will show the below error code when there is a short circuit:
1. F1: resistance for the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R
2. F2: resistance for the heating coil of cartomizer is smaller than 0.5R
Errol
Vmax user settings:
That was great Errol, can you work on my cell phone book?
That was great Errol, can you work on my cell phone book?
There are some advanced technology things us old timers refuse to learn and for me it's the Cell Phone, don't have one and doubt I ever will.
Errol
I think it looks great. The rough look is exactly what he was going for. Google steam punk. You'll understand...
All this talk of the SS version is making me think I need one! I have a black V2 right now and love it. Was saving to get a bottom feeder to try out, now Im thinking SS VMAX....
Even sweeter, item released from customs
Even sweeter,I got my replacement this morning \o/
That was fast. I'll bet you got the original turbo model again
Good to be home again, innit?
I also recently picked up the iTaste which is pretty cool. However, when vaping it I'm thinking 'neat little toy' whereas with the vmax 'Ahhh, the real McCoy.'
Correct thinking like this will be rewarded
I have a v1 black and currently waiting on an SS to arrive. Beauty and the Beast.
Will also be getting the gun metal when available. The Howitzer.
Correct thinking like this will be rewarded
I have a v1 black and currently waiting on an SS to arrive. Beauty and the Beast.
Will also be getting the gun metal when available. The Howitzer.
Ohhhhhh SNAP Fuzzi's goin for a hat trick !!!! lol Wait till yuo see whats on the way to me in a few days.
My guess is Howitzer. Only you can't name it that, it's mine
Suggestion for your gun metal one: Uzi
My guess is Howitzer. Only you can't name it that, it's mine
Suggestion for your gun metal one: Uzi
Considering it's VapnJ saying it, my guess is a version3...
Either that or an "experimental" finish they haven't announced yet...
Thanks for all the replies about the Vmax/Provari question.
Is the SS version more accurate than the previous version? do the actual numbers some close to what if feels like it is putting out? I haven't seen any youtube vids on the SS version
Is the SS version more accurate than the previous version? do the actual numbers some close to what if feels like it is putting out? I haven't seen any youtube vids on the SS version
- Status
Similar threads
