Snails - Response on Threads

Status
Not open for further replies.

SilverBear

Super Member
ECF Veteran
Verified Member
Sep 30, 2009
351
54,956
Just because you've said that, I hope they are on a non-combustible surface ;)

In an enclosed amoire, polyurethaned to within an inch of its life.

Very similar to this... and it came with a small stepstool to enable seeing into the top couple of drawers. (Those are where the nasty unspeakables reside. And I'm not talking about vaping materials.)

novara_armoire_mocacchino_bg.jpg
 
Last edited:

TomCatt

Da Catt
ECF Veteran
Verified Member
Mar 8, 2011
4,162
18,320
Upland, PA
Guess I need to go to pro vapes dot com and get a refresher on the Provari menu system!!!

:herp:
:derp:
:hurrrrr:
:durrrrr:

They do the : press : : press: : press : <oh, crap, went too far> : press : : press : : press : : press : : press :, don't they? :blink:

I've been adjusting the voltage back and forth on my rebuilt Evod a lot lately - extremely easy with the Vamo and Robust. If I had a Provari it would be a very expensive twisted piece of metal if I had to do that to adjust the Vs.


Oh, the Panasonics CGR batteries do have more life than the cheapy EH IMRs. Put the Pannies in storage for when the EHs conk out. Still, I don't get multiple days with the Vamo with either battery; but then I don't run the battery down until the mod kicks off, but I do run them down to ~3.5 - 3.6V.
 

SilverBear

Super Member
ECF Veteran
Verified Member
Sep 30, 2009
351
54,956
They do the : press : : press: : press : <oh, crap, went too far> : press : : press : : press : : press : : press :, don't they? :blink:

Yep! As impatient as I am with a lot of things, for some reason, that does not get me all riled. I don't fiddle around from puff to puff.

BTW: I forgot that the carto does NOT come off with the tank simply by pulling... so I ended up with >5ml of juice all over the place (hands, lap, carpet, dektop). Plus, the carto was completely saturated from sitting for so long.
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
They shouldn't mold, PG is a 'disinfectant'; however flavorings may degrade and depending on the time/temperatures stored at the nic may degrade also.


on the juice darkening in clearo - some of that is 'backwash' from the 'gunk' build-up on the wick/coil; some possibly from heat degrading the juice. If you haven't tried any of the bottom-coil clearos (Kanger), give them a shot; seems to happen less with these than the top-coils - for me anyway.

(Dry burn and rinse after every, or every other, fill can keep the 'backwash' contribution down.)

PG is a solvent. I use it to dissolve the gunk from the coil, actually. I put unflavored in my clearomizer and vape for a while, empty the tank, put fresh unflavored, reapeat until the eliquid runs clear. My idea of a wet burn. :D
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread