So I made myself sick

[Sucker_dad]

Ok, I started dripping a few months back and I have dropped my nicotine down to 6mg. I have made sure to be safe. I have very good batteries I am familiar with Ohms law I test my builds very well before I fire them up. I do everything I can to be safe. I built my first ridiculous sub ohm coil tonight. A twisted 28 gauge dual coil running about .3 ohm. I know that's the very limit of what I should go down to. I like to keep it around .7 or .8, I was just experimenting. Well this thing hits like a Mack Truck and tastes fantastic. I have been vaping like a fool and now, I am so nauseous I think I might actually hurl. I feel like an idiot. I think I'm calling it a night.

 

[Dusif]

Been there done that... Banana nut bread with chocolate is such a dangerous flavor to use on a subohm built :S


__________________________
M16 helio 0,35
Galileo helio/chimbus 0,5/0,4
Bolt carto tank
Vamo vivi/protank
Kts+ igo-w 0,7

 

[Sucker_dad]

Funny mine is a banana flavor as well. Jedi Juice


Sent from my intestines using my linear gas accelerator.

 

[Ohms Lawbreaker]

True, folks got to watch, especially after upgrading to better gear. Blowing clouds should not mean blowing your oats too.

 

[Choc_Addic]

TBlowing clouds should not mean blowing your oats too.

8-o

 

[Ryedan]

Well this thing hits like a Mack Truck and tastes fantastic. I have been vaping like a fool and now, I am so nauseous I think I might actually hurl. I feel like an idiot. I think I'm calling it a night.

Don't feel too bad, I did the same thing when I got my first good build on my AGA-T. I was still vaping nic juices then. I think it was Strawberry Margarita from Madvapes at a measly 6 mg. It had never tasted so good, but I was already dropping my nic levels and was not used to it any more. I never made that mistake again and you won't either

I think of it now as the RBANB. RBA newbie blues

 

[cramptholomew]

Been there done that... Banana nut bread with chocolate is such a dangerous flavor to use on a subohm built :S

Hmm, I will have to try this Choconana Bread you speak of...

 

[Sucker_dad]

Wow, I sure won't be forgetting that anytime soon. I was really really queezy last night. I never get that way. Lesson learned. I'm still taking it easy today. I may need to get some 0nic or get an extra flavor shot and cut it 1 to 1 with VG On another note, I will be building coils like that again. I was amazed at the flavor and hit I was getting. I do need to get a better Ohm meter if I'm going to continue it.

 

[stylezuk]

Lol first 0.4ohm quad with 24mg high PG juice was a bottle given and didn't read the mg as vape 6-12 when dripping, thought was going to hurl but more than anything it ripped through my stomach, had to laugh after.

Shot yourself in the eye yet "user error as my responsibility"

 

[Sucker_dad]

Lol first 0.4ohm quad with 24mg high PG juice was a bottle given and didn't read the mg as vape 6-12 when dripping, thought was going to hurl but more than anything it ripped through my stomach, had to laugh after.

Shot yourself in the eye yet "user error as my responsibility"

Oh yes. I have one dripper that has a 3/16th air hole and if I don't turn it the right way it shoots fight at my eye. I've had a couple of shots to the eyeball.

 

[Visus]

Its surprising how much nic isnt vaped when using higher ohm coils or an improper build.

Methinks its how its thinned when combusted at such high temps, the vapor is compacted more, dense and rich. 2mg is way to high on some of my builds and I normally use 12mg on a basic build..

Whats good if your not to far out a small 20 minute rest and it goes away, sometimes even shorter rest but you have to lay down to quiet and that part befuddles me as to why it last so long while sitting.

 

[alkaiser]

Its surprising how much nic isnt vaped when using higher ohm coils or an improper build.

Methinks its how its thinned when combusted at such high temps, the vapor is compacted more, dense and rich. 2mg is way to high on some of my builds and I normally use 12mg on a basic build..

Whats good if your not to far out a small 20 minute rest and it goes away, sometimes even shorter rest but you have to lay down to quiet and that part befuddles me as to why it last so long while sitting.

it's not that the nic isn't vaped. lower ohm/multiple coils/higher airflow just means that more juice is being vaporized. more juice = more vapor.

 

[stylezuk]

it's not that the nic isn't vaped. lower ohm/multiple coils/higher airflow just means that more juice is being vaporized. more juice = more vapor.

Is there a higher burning point to Nic than say PG/VG as what your saying had'ent passed my mind before, so there fore the latter of juice left would be a higher Nic content?

 

[alkaiser]

i'd say they're probably similar (but i'm not a pro, so don't trust me on this) from my observation. the nic level throughout my juice (in my tank/well) is pretty consistent as long as it doesn't fit for a long period of time (nicotine does separate from the pg/vg)

 

[Nikkita6]

Ok, I started dripping a few months back and I have dropped my nicotine down to 6mg. I have made sure to be safe. I have very good batteries I am familiar with Ohms law I test my builds very well before I fire them up. I do everything I can to be safe. I built my first ridiculous sub ohm coil tonight. A twisted 28 gauge dual coil running about .3 ohm. I know that's the very limit of what I should go down to. I like to keep it around .7 or .8, I was just experimenting. Well this thing hits like a Mack Truck and tastes fantastic. I have been vaping like a fool and now, I am so nauseous I think I might actually hurl. I feel like an idiot. I think I'm calling it a night.

This made me giggle ... so now you know why many sub ohmer's vape zero nic!

 

[Visus]

it's not that the nic isn't vaped. lower ohm/multiple coils/higher airflow just means that more juice is being vaporized. more juice = more vapor.

DUh lol but theres something about the extra dense with the heat being amped up.. I can make a 3 ohm coil that can make as much or more vapor than a low ohm build and it doesn't over-nic me so fast. I really do think the combustion point has science intuit there.. Almost 1200 degrees on a .2ohm to my 400 or 500 degree on a 3 ohm difference..

 

[alkaiser]

DUh lol but theres something about the extra dense with the heat being amped up.. I can make a 3 ohm coil that can make as much or more vapor than a low ohm build and it doesn't over-nic me so fast. I really do think the combustion point has science intuit there.. Almost 1200 degrees on a .2ohm to my 400 or 500 degree on a 3 ohm difference..

i'd like to see that 3 ohm build that creates as much or more vapor as a 0.2 ohm build

 

[Mitey F]

DUh lol but theres something about the extra dense with the heat being amped up.. I can make a 3 ohm coil that can make as much or more vapor than a low ohm build and it doesn't over-nic me so fast. I really do think the combustion point has science intuit there.. Almost 1200 degrees on a .2ohm to my 400 or 500 degree on a 3 ohm difference..

I have to ask... are these temperatures purely made up? Or did I miss something where you actually measured it?

 

[Visus]

I have to ask... are these temperatures purely made up? Or did I miss something where you actually measured it?

Lol a little research guy gives ya results
I was wrong its a lot hotter than what I was saying
The cloudy is all in the build, airhole, ejuice vg %, wicking
I usually never build below 1.5ohms @1.5 ohms its compatible with probably a .1 ohm coil lol
Nano coils ...

 

[Visus]

Heres a custom stripped down boge I built its micro nano 3.4 ohms ss mesh and sterile gauze hybrid and blows humongous rich clouds thick milky soupy
Gauge plays a huge role its 32 gauge nichrome which at low amps heats up fast and hot as hades much quicker than a 28 gauge coil but will pop on ya if the build isnt built without twisting kink from wrapping it.. My mod ramps up so quickly I probably only heat it up to about 400-500 degrees or so. If I hold it for more than 4-6 secs it gets blazing hot..