So I'm looking into kayfun lites for my mvp2.0

[nelska]

in this review rip trippers is vaping it at 8-9watts.
https://www.youtube.com/watch?v=e3CQnBesJaY


Think it's worth the risk to purchase?
$14.39 Kayfun Lite Styled Rebuildable Atomizer (4.5mL) - clear tank section at FastTech - Worldwide Free Shipping

 

[DingerCPA]

I just got one very similar that arrived last week: https://www.fasttech.com/products/1692100

Built to 1.9 ohms and I am liking it - probably build 1.7-1.8 next time.

I'm now looking at this one: https://www.fasttech.com/products/1699800 because this one has airflow control. However, I'm not sensing the need - idk - that and this one looks "pretty" and "shiny"

This was my first fasttech purchase. All-in-all, not disappointed. Just had to learn the ropes of how they work.

For less than $15, I'd say it's certainly worth the experiment.

 

[nelska]

Nice, thanks. So, I'll be buying that and probably coil and wicks.

 

[quest]

I have a KFL+ v2 clone that I got from 101 vapes for my mvp 2 (faster shipping, more reliable). I'm a bit skpetical about the rba's from fasttech in terms of quality, but that's just me. I would suggest that you invest in a Kayfun lite plus clone rather than the regular KFL clone because they've made improvements to the build. The KFL plus has another screw at the bottom to adjust airflow, deeper juice wells, and a bigger air hole. It also comes with a stainless steel tank if you don't like the see-through plastic tank. You can find the KFL+ and KFL+ v2 at fasttech too.
Either way, hope you enjoy your kayfun, mate!

 

[Den Chan]

Do yourself a favor, pick up some cellucotton rayon. It's brought my KFL+ out of retirement. No dry hits, and tastes like a dripper.

 

[Iusedtoanalog]

Hi nelska. So i have one piece of advice if you decide on getting an order from FT... either of the new Kayfun Lite +v2 either the black or the stainless.... they have the proper juice channels and airflow as well as the nano body and the shallow top cap..... yes either is a couple of dollars more than the one in the op but they are well worth it. Fyi i have both of them and they are as good as my Kebo Russian in build quality and in performance...... if FT supplies you with products as nice as the ones I have received you will find it hard to shop at other places.... Good Luck. Happy Vaping.

Sent from my rotary phone using sheer willpower

 

[Despraci]

I would not recommend that KFL from fasttech. I actually purchased it and gave it a bad review that they refused to publish. It is complete garbage compared to a Ehpro KFL v2 clone or even a Tobecco KFL v2. That exact item is now in my trash waiting to make its way to the landfill. I've built KFL builds on authentics and clones and never had a leak out of the airhole till I tried this device.

Do yourself a favor and spend a little more and be a lot happier.

 

[amolson]

I have an EHPro KFL+ I got off ebay with no problems whatsoever. Although if I were to get another one, I'd probably get the V2 version from 101vape

Mostly just to have it in stainless to match my precious. But it's great, no complaints. Just black and I already have too much black stuff.

 

[JoeJL]

I also bought SKU: 1567302 from Fast Tech.(sorry being a newb here doesn't allow me to post links) I have to say that it is a big pile of something... I never have used a real kay fun lite, but this one has very restrictive air flow and on impulse of the great price I didn't realize it was chromed brass. The chrome started flaking off the connection block after one use and forget about washing it in water properly. it will rust the 510 post and the screws just after a few minutes being wet.

 

[Despraci]

I also bought SKU: 1567302 from Fast Tech.(sorry being a newb here doesn't allow me to post links) I have to say that it is a big pile of something... I never have used a real kay fun lite, but this one has very restrictive air flow and on impulse of the great price I didn't realize it was chromed brass. The chrome started flaking off the connection block after one use and forget about washing it in water properly. it will rust the 510 post and the screws just after a few minutes being wet.

That's the same one as the OP linked and is the same piece of garbage, just in black chrome. I really really recommend getting an Ehpro or even a Tobecco for $10 - $15 more and have less problems and more enjoyment.

 

[JoeJL]

That's the same one as the OP linked and is the same piece of garbage, just in black chrome. I really really recommend getting an Ehpro or even a Tobecco for $10 - $15 more and have less problems and more enjoyment.

Agreed will have to look into the Ehpro or the Tobecco KFL's . I have learned that you really get what you pay for on Fast Tech.

 

[cashew]

It does with the luck of the draw at FT, sometime you get a steal and sometime you........

 

[Kor 214I]

Another+ for the Ehpro KFL+ V2,I have 5 ( 2 vaper household) thats all we use,got em from 101Vape,their a little more but worth it. Hope this helps.

The wife uses it on a MVP2 also.

 

[Wow1420]

I would not recommend that KFL from fasttech. I actually purchased it and gave it a bad review that they refused to publish. It is complete garbage compared to a Ehpro KFL v2 clone or even a Tobecco KFL v2. That exact item is now in my trash waiting to make its way to the landfill. I've built KFL builds on authentics and clones and never had a leak out of the airhole till I tried this device.

Do yourself a favor and spend a little more and be a lot happier.

I've had the opposite experience. I have 8 different KF & Russian clones, 6 from FT, the one the OP linked to works perfectly for me, although not the best machining & finish. My tobecco are the worst, one with too shallow juice channels and one with too deep channels. I suppose it all comes down to poor QC on the clones, especially the less expensive ones.

Their V2 $31.02 Kayfun Lite Plus V2 Style Rebuildable Atomizer (4.5ml) - 1:1 clone / stainless steel at FastTech - Worldwide Free Shipping is the best them, really nice.

Also, if you want to post a negative review on FT, you have to do so from your order history, click on the "details, options and support" link and then clink on "write a review" next to the item. They let anyone write a positive review, but only verified buyers can write negative reviews and the way they know you bought the product is through the link inside your order history.

 

[Despraci]

Also, if you want to post a negative review on FT, you have to do so from your order history, click on the "details, options and support" link and then clink on "write a review" next to the item. They let anyone write a positive review, but only verified buyers can write negative reviews and the way they know you bought the product is through the link inside your order history.

Actually that's not correct. They review every review that gets posted. Even with the order history and doing it exactly as you stated, they will not approve the negative review I wrote, I can take a screenshot if you like.

Also, for $28 - $30 I can order a Ehpro KFL+ from a seller off eBay and have it to my door in a week, give or take a couple days. I've personally seen the difference between Fasttech and Ehpro KFL and Ehpro is probably the closest to authentic I ever seen.

And the link the OP provided... don't expect 80% of your 510 drip tips to fit either.

The one time I had one issue with a Ehpro from a seller, the seller reimburse me some money and provided the parts. Fasttech gave me the "we're sorry you are not happy with the quality and we'll try to control quality better in the future".... and it went in the garbage.

If I want cheap and can wait a month for it to finally show up, then Fasttech is a great way to go. I use it for my expected replaceable items... like tanks. But if I am in the market for clone, Ehpro is top of my list, Hcigar is second. Infinite and SGS is a possibility.

Some of Fasttech's items are truly like a box of chocolates.. you never know what you're going get, and it may end up in the garbage. And I learned not to trust their reviews since I now know first hand they are screening which ones get posted and which ones don't.

 

[VZToronto]

MVP wouldn't fire a Kayfun at sub ohms, so you won't be able to use the Kayfun at it's full potential.

 

[herb]

I bought this one $16.59 Kayfun Lite Styled Rebuildable Atomizer (4.5ml) - clear tank section / matte surface at FastTech - Worldwide Free Shipping after doing tons and tons of research on all the models FT offers.

Seems the discussions forum pinned this model as superb with top notch machining and most of the comments mentioned it was the best clone they have received when compared to the other FT clones they have .

Super smooth threading with a seamless fit , airflow works flawlessly and i have had zero leaks , easy to fill with an o ring equipped fill screw and hits like a beast on the MVP with builds in the 1.2-1.8 ohm range.

After playing with many different size and types of coils i strongly prefer micro coils on 28 gauge Kanthal and a mandrel no larger than 1/16th and then lightly compacted and wicked with cotton.

I have noticed (with 28 gauge) anything larger in diameter than 1/16 to wrap with does not heat the coils fast enough because the MVP has that cutoff feature

For $16.00 you can't go wrong

 

[herb]

MVP wouldn't fire a Kayfun at sub ohms, so you won't be able to use the Kayfun at it's full potential.

MVP is not a sub ohm device , i am blowing clouds with the Kayfun i just mentioned on a 1.4 ohm build as we speak lol.

 

[rc3po]

I would not recommend that KFL from fasttech. I actually purchased it and gave it a bad review that they refused to publish. It is complete garbage compared to a Ehpro KFL v2 clone or even a Tobecco KFL v2. That exact item is now in my trash waiting to make its way to the landfill. I've built KFL builds on authentics and clones and never had a leak out of the airhole till I tried this device.

Do yourself a favor and spend a little more and be a lot happier.

I agree. I'm not wasting my money on clones anymore. I'll save for 2 months to get the authentic before I buy another clone. Good luck getting it to fire in a Zmax also.

 

[Topwater Elvis]

MVP wouldn't fire a Kayfun at sub ohms, so you won't be able to use the Kayfun at it's full potential.

Hog wash, any RBA can be built and function to its full potential without the use of 'sub ohm' resistance coils.