Some interesting information for you all that I tested out

[MegaDark]

I wonder if anybody have tried these experiment before.
After I recieved my astro from kato.
I found out the conductivity was dame amazing although the astro is made up of full SS but the conductivity does not lose to a full brass chi_you.
So I tried it out by removing the orignal spring that was provided by predo and replace with a brass spring I did myself.
And did a difference test between the normal spring and the brass spring I made myself.

Here are the readings I got using a multimeter to check the voltage drop.
The atty I used was a 0.45ohm dual coil.

A difference of 0.1 volt!!!!.
Will try to get some copper rod and make the spring to try it out.

 

[Hoseiliao]

silver plating the contacts/springs should narrow the figure down even more. And sub .5ohm coil is very borderline vaping liao bro be careful.

 

[Jxoo]

silver plating the contacts/springs should narrow the figure down even more. And sub .5ohm coil is very borderline vaping liao bro be careful.

Dont worry bout him man. He's been vaping .4 ohm dual coils for god knows how long.

 

[MegaDark]

I only use 18650 aw for my vaping needs

Sent from my GT-N7105 using Tapatalk 2

 

[goomok]

Hehe...subs the way man, yes it's better if you can silver plate it, but I heard silver oxidizes quickly, need extra cleaning of the contacts. Vape on.

 

[ussr]

Will try to get some copper rod and make the spring to try it out.

when will production start?

 

[Ash45]

Hehe...subs the way man, yes it's better if you can silver plate it, but I heard silver oxidizes quickly, need extra cleaning of the contacts. Vape on.

The solution:

Gold plate ON TOP of the silver.

Anti-corrosion mantains conductivity.

 

[goomok]

The solution:

Gold plate ON TOP of the silver.

Anti-corrosion mantains conductivity.

Wah u always poison ppl ash45, hehe...goldsmith can entertain or not? (Serious)

 

[goomok]

I wonder if anybody have tried these experiment before.
After I recieved my astro from kato.
I found out the conductivity was dame amazing although the astro is made up of full SS but the conductivity does not lose to a full brass chi_you.
So I tried it out by removing the orignal spring that was provided by predo and replace with a brass spring I did myself.
And did a difference test between the normal spring and the brass spring I made myself.

Here are the readings I got using a multimeter to check the voltage drop.
The atty I used was a 0.45ohm dual coil.

A difference of 0.1 volt!!!!.
Will try to get some copper rod and make the spring to try it out.

Bro, my friend uses a single core copper wire, not sure bout the diameter, but definitely thicker than normal copper wire and make the spring, now his Chinese mod hit obviously better. Budget free, hehe, recycle wires from home.

 

[Ash45]

Wah u always poison ppl ash45, hehe...goldsmith can entertain or not? (Serious)

Poison? Not at all.
It's a totally do-able approach with long term benefits.

Goldsmith, I dunno. Other places, yes.
There are 'shops' around that do gold plating without MOQ actually.

 

[MegaDark]

Bro, my friend uses a single core copper wire, not sure bout the diameter, but definitely thicker than normal copper wire and make the spring, now his Chinese mod hit obviously better. Budget free, hehe, recycle wires from home.

Copper is always better than alot other metals.
When did your friend tried it out

Sent from my GT-N7105 using Tapatalk 2

 

[kimochi-ii]

Like that... Mean can silver plate already then gold plate? Double plate?

 

[Ash45]

Like that... Mean can silver plate already then gold plate? Double plate?

Lol...

Extreme measure lah... Do-able, if you wanna, but don't overdo lah...
Later screwthreads jam.

Best is still one time Rhodium plate the bugger.

 

[kimochi-ii]

Steady.. We go do... But cannot one time plate all no mod use :x

 

[alvinado]

Like that... Mean can silver plate already then gold plate? Double plate?

elz, i have already one mod like that gold over silver over brass, the paps lux.

 

[mavieboy]

elz, i have already one mod like that gold over silver over brass, the paps lux.

hits damn hard.... i like my lux paps

 

[goomok]

Copper is always better than alot other metals.
When did your friend tried it out

Sent from my GT-N7105 using Tapatalk 2

Last 2 weeks...

 

[goomok]

If u guys into this plating thingy do let me know...hehe, wanna join

 

[Currynoah]

I wonder if anybody have tried these experiment before.
After I recieved my astro from kato.
I found out the conductivity was dame amazing although the astro is made up of full SS but the conductivity does not lose to a full brass chi_you.
So I tried it out by removing the orignal spring that was provided by predo and replace with a brass spring I did myself.
And did a difference test between the normal spring and the brass spring I made myself.

Here are the readings I got using a multimeter to check the voltage drop.
The atty I used was a 0.45ohm dual coil.

A difference of 0.1 volt!!!!.
Will try to get some copper rod and make the spring to try it out.

Interesting enough to say bro, I believe your experiment will work.

Simply bcoz this is what I found in the BBM Steampunk's switch:



Go for it, bro... Let us know what you found...