Some juices not working

[Sequal]

I ran into an issue with 2 of my juices. I have ry4 from MBV and some Atlanta Peach leaf from nambler. Well i cant get any vapor out of my the ry4 and the peach was working fine but when i woke up and went to take a toot it too is not making vapor. This is in 2 different Kanger v2's. I even replaced the cartomizer in the RY4. what the heck is going on?

 

[Red_Bird]

Could be many things:

1) Bad contact between battery and device on top of it. Unscrew device, if juice is in the small well ontop of your battery swab it out with a qtip dipped in isopryl alcohol. Make sure threads are juice free too.

2.) Is battery life depleted?

3.) What kind of battery? How many volts is it pushing? What is the ohms resistance of your cartomizer/ clearomizer? You may need to increase voltage, if it is possible.

 

[Sequal]

This is on an ego. I have 2 batteries and its the same with both of them.

 

[tmaxxking2]

Maybe the center pin on the ego batt or the T2 has been compressed to far 1 T2 I had to use needle nose on the center pin just a tiny wiggle moved the pin out enough to make contact on the batts again ... make sure you give it almost no force at all you might pull the pin out of the clearo

 

[Sequal]

Ok thanks i will check the center pin when i get home. I do see the light on the ego come on dosent that mean it has contact with the carto?

 

[tmaxxking2]

Light will work with no tank at all