Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

[rcbell.N51]

Hey EV1! I apologize for not checking in lately. Thought the thread was dead again but it's great to see some posts!

I see you two already have the V4 figured out lol. I was pretty confident the OD/Length of #25 would fit nice but was unsure about the wall thickness. Wanted to hold off on test fitting until the "1:1" clones hit for comparison purposes. It's fantastic to see #25 fitting authentic V4's...I'm assuming those are authentic V4's? Thanks for posting the pics guys...Just made my day!

BTW...Erlkonigin, Erlkonigin Nano, Lemo and Lemo Drop are on deck.

Nice. Thanks for the update on the Erls (and Lemo Drop for those that have 'em).

Yes, I'm using an authentic KF4. If there is a difference in size between the #25 and the authentic glass (either height, diameter, or thickness) it's too small for me to see, and I'm not exactly sure where my caliper is at the moment.

 

[BlaqueJezus]

Mine is also authentic. Now make the glow in the dark one

Sent from my iPhone using Tapatalk

 

[Dan Patrick]

I just sent in an order for the green. That will go great with my new Celtic Knot P3 set up and kayfun V4. I sent a contact form, and then finally found this thread, so I just ordered my first Spectrum tank! I am hooked.

 

[murtcepS]

#25 certainly fits the Tobeco Kayfun V4 perfectly... OD/ID/Length are identical to the stock tank

 

[witch1]

I just want to say thank you for having such great customer service! Ya'll are my favorite custom tank makers!

 

[murtcepS]

Just wanted to mention that the new sizes are in stock. Working on Billow now but here's some pics

Kayfun V4. Fits authentic, EHPro, Tobeco and Code Vape...That's all I can confirm for now.

Erlkonigin and Nano.

Lemo and Lemo Drop.

 

[rcbell.N51]

K4 looks good in green. Might have to give that a try, not to mention the Erl tanks. Thanks Spectrum.

 

[Uno mas]

Package received, thanks Mike

 

[murtcepS]

I have both of your names on the "automatic extra" list We have some UD Goblin tanks in stock (#34) Fairly limited quantities but 6 colors to choose from.

 

[murtcepS]

Here's how the Subtank Mini turned out

 

[Elantis]

Here's how the Subtank Mini turned out

I'ma gettin' one of them there tanks! Hoping that I like it, then I can buy a pretty tank for it !

 

[Uno mas]

Just picked up a Lemo Drop RBA, a colored tube sure would look nice

 

[Elantis]

Received my package today...thanks for being so speedy ...I am sure it confuzzled you that me, E, was actually buying PINK driptips.

I blame it all on the iSticks, you know how I have to be colored co-ordinated . Will probably be buying blue and smoke too in the near future.

ETA: and perhaps a couple of pretty tanks for the mini sub

 

[JeepR KReapR]

@murtcepS

Mike,

I recently purchased a teal ElrK tank and an amber ErlK nano tank from Spectrum. The glass is beautiful but after the first day I started to get a pretty serious leak between the glass and the bottom o-ring supplied with the tank. Now that I have reverted to the original poly tank & orings the leak is gone.

Is there someone else I can contact to discuss the issue? I'm not looking for a refund or exchange, but maybe I can provide some feedback if there are fitment issues since this is a new tank.

 

[murtcepS]

Uno, Pick-up a blue and put the other color you want in the "note to seller" part of PayPal. Always a 2 for 1 special going on for you

Elantis, The pink did throw me off a bit. I saw your order and thought to myself... Hormone therapy?? It's good to see you chime in again and I hope you can use that orange!

RC, I know we threw in an extra for you as well. Don't remember what it was but it made sense at the time. Thanks for the order my friend!

Jeep, I'm very sorry you had the leaking issue! I spot checked a couple dozen of the Erlk tanks for both full and nano. The ID was running +/- 0.09 and I was thinking...Nice!! It's possible you received a tank that fell out of tolerance so we'll measuring Erlk tanks prior to shipping going forward. It's either the o-rings or the glass...Shoot me an email and I'll make it right

 

[JeepR KReapR]

Uno, Pick-up a blue and put the other color you want in the "note to seller" part of PayPal. Always a 2 for 1 special going on for you

Elantis, The pink did throw me off a bit. I saw your order and thought to myself... Hormone therapy?? It's good to see you chime in again and I hope you can use that orange!

RC, I know we threw in an extra for you as well. Don't remember what it was but it made sense at the time. Thanks for the order my friend!

Jeep, I'm very sorry you had the leaking issue! I spot checked a couple dozen of the Erlk tanks for both full and nano. The ID was running +/- 0.09 and I was thinking...Nice!! It's possible you received a tank that fell out of tolerance so we'll measuring Erlk tanks prior to shipping going forward. It's either the o-rings or the glass...Shoot me an email and I'll make it right

Thanks Mike! I'll shoot you a PM on here with my order details. The glass is beautiful and I much prefer it to the IBT glass I tried before. I'll assume the Amber nano I got is fine for now. I haven't put it on yet due to the issues I had with the full sized teal tank.

I hope it works out, I've got my eyes on your kanger sub tank mini glass when I get my sub tanks next week!




Sent from my iPad using Tapatalk

 

[Elantis]

Elantis, The pink did throw me off a bit. I saw your order and thought to myself... Hormone therapy?? It's good to see you chime in again and I hope you can use that orange!

Awww thanks! I can always use the drip tips...they are my fave . I put the two pinks on my pink 20w and 30w iSticks. I can definitely use the orange on the black ones.

 

[Uno mas]

Lookin' forward to colored Lemo tubes, ordered

 

[murtcepS]

Thanks Uno! Saw your order and I'll get it shipped out tomorrow with the extra smoke Here's a pic of a Lancia clone. The stock tank is poly but it's been custom fitted to accept Pyrex.

 

[murtcepS]

Someone sent in a Prow-T last week hoping one of the stock sizes would fit. #18 installed perfectly using stock o-rings. Late night photo!