Square tank made specifically for box mods!!! (KS RTA)
- Thread starter SteamHead
- Start date
- th_trl_thread_readers 0
- Status
https://www.fasttech.com/products/3...placement-stainless-steel-acrylic-tank-for-ks
Just have to ask, in the new arrivals.
Just have to ask, in the new arrivals.
So it looks like Tobeco is going on the success of the KS, looks interesting.
Super tank KS(with 2 super tank coil) .
Huge capacity about 8ml
Can use rebuildalbe coil and supertank coil.
Easy to control airflow
PMMA tank
$25 @ Angelcigs, think I'll wait for Kanvape to get them.
Super tank KS(with 2 super tank coil) .
Huge capacity about 8ml
Can use rebuildalbe coil and supertank coil.
Easy to control airflow
PMMA tank
$25 @ Angelcigs, think I'll wait for Kanvape to get them.
Looks great, but I am growing tired of the dual coil Orchid style decks on everything these days.
Agreed, would have liked it more with a two post deck, wonder if any other decks would screw into it.
Well I do like the KS, so I had to try it. Got it from Kanvape, they have it in black, and Silver. $20 to my door. Its pretty much the KS with a dual coil deck, a little more capacity, and a fair bit more air flow.
Not much excitment with the RBA deck, pretty familiar design, but it works well enough. Also uses Supertank pre0builts, which I believe are compatible with Atlantis type coils. I have a 26g 316L 2.5mm dual coil build in it coming in @ .23 ohms. Usable power or TC mode. Currently using it in TC mode, resistance is stable its working quite well.
Air flow not as open as some of the latest, but quite sufficient for good open lung hits. It does not close off 100%, but does shut down pretty tight.
Tanks are not interchangeable between the KS, and the KS ST. Overall I like it, I have not tried it yet with prebuilts, but it does include one .2 ohm, and one .5 ohm coil heads.
Kind of cool in the respect it is an original design by Tobeco, it is most certainly based upon the Holyland KS, but internally it is quite different, and to me improved a fair bit, especially the AFC.
Not much excitment with the RBA deck, pretty familiar design, but it works well enough. Also uses Supertank pre0builts, which I believe are compatible with Atlantis type coils. I have a 26g 316L 2.5mm dual coil build in it coming in @ .23 ohms. Usable power or TC mode. Currently using it in TC mode, resistance is stable its working quite well.
Air flow not as open as some of the latest, but quite sufficient for good open lung hits. It does not close off 100%, but does shut down pretty tight.
Tanks are not interchangeable between the KS, and the KS ST. Overall I like it, I have not tried it yet with prebuilts, but it does include one .2 ohm, and one .5 ohm coil heads.
Kind of cool in the respect it is an original design by Tobeco, it is most certainly based upon the Holyland KS, but internally it is quite different, and to me improved a fair bit, especially the AFC.
Last edited:
Nice looking tank cc! I think I'll pass on this one as I don't do coil heads and it has that tiny little Orchid style deck...
A velocity style deck would have been excellent!
A velocity style deck would have been excellent!
Another option for it, kind of bought it figuring a little versatility, maybe I'll see a few more options for decks, either way its pretty decent.
hey guys, quick question. i got a ks styled rta from FT. it only has an rba deck no pre mades for this puppy. does this tank have juice control? didnt come with instructions, so im having to figure this out on my own. also the poly carb tank doesnt appear to separate? howyou guys wicking this thing. i just cut the wicks and stuffed em down into the cup, nuttin hanging into the channels. crappy tablet=crappy photo.
Don't have one because fasttech screwed up my shipping but as I understand it you twist the drip tip unscrewing the chimney to open the juice port slots and you control it that way.
yep a little fiddling around with it and saw that the whole barrel/chimney screws up and down. before i knew this the barrel was all the way down, went to vape it at 35 watts .56 ohms and inhaled a lovely, tasty and satisfying fire ball. yum........ all good now, got the barrel all the way up, great vape.
I have yet to reorder mine from fasttech because I was so ...... they shipped it via ems after their contract ran out so it was returned to them. A month & half later I asked them where my order was and they said it was returned to them and they contacted me to see if I still wanted it (I thought they said they would ship it via a different method, but apparently they said they would like to pending my approval but their version of engrish is different than mine).
I got ...... & cancelled the order completely.
Now that you have it - what do you think? See the price has dropped so I was thinking of reordering but airflow is imagined as kayfunish and I may find it severely lacking. See they have a Super KS coming out with greater airflow, premade coils and replaceable single & dual coil build decks. Might be worth waiting for
Super Tank KS Hybrid Tank by Tobeco | VapoRider
I got ...... & cancelled the order completely.
Now that you have it - what do you think? See the price has dropped so I was thinking of reordering but airflow is imagined as kayfunish and I may find it severely lacking. See they have a Super KS coming out with greater airflow, premade coils and replaceable single & dual coil build decks. Might be worth waiting for
Super Tank KS Hybrid Tank by Tobeco | VapoRider
Last edited:
Do you have a link or description to this single coil deck for the Super KS Tank? Can't seen to find it.Another option for it, kind of bought it figuring a little versatility, maybe I'll see a few more options for decks, either way its pretty decent.
Hard to find unless you know what your looking for I'd suggest this one Authentic Anyvape SegaTank RBA V2 Coil Head (PRE-BUILT) Deck Kit Sega Tank
But Fasttech has a clone for less, but unknown quality. $2.81 Replacement Rebuildable RBA Coil Head for Atlantis Clearomizer - 0.5ohm at FastTech - Worldwide Free Shipping
Also, there is a version 1 around, don't buy that one, make sure it is V2 like I've linked if you buy elsewhere.
But Fasttech has a clone for less, but unknown quality. $2.81 Replacement Rebuildable RBA Coil Head for Atlantis Clearomizer - 0.5ohm at FastTech - Worldwide Free Shipping
Also, there is a version 1 around, don't buy that one, make sure it is V2 like I've linked if you buy elsewhere.
Got one today and have a small question. With the 0.5/0.2 i have no leaking. But with the RBA (4 posts) it leaks out the bottom and from the air hole on the side. Anyone else has any problems with leaking? Like i said the premade ones work perfectly.
The RBA deck is fairly critical of under/over wicking, it works pretty well when you get it right, but get it right you must.
I'm gonna give it another go because the taste of the provided coils is just not hitting the spot. Thanks
- Status
Similar threads
- Locked
