Are there any differences? For instance, do you squonk less with a carto, as there is absorbent material in the carto ?
- Status
ya , probably best to pre-fill your carto then do squanks without firing and let sit to absorb in the carto then fire away because the carto is a bit different then running an Atty where you can squank and fire at the same time. I'm not saying you cant squank and fire a carto at the same time but the carto needs to absorb the liquid to fill up the Atty doesn't. so with the carto the liquids come into the carto's center tube then have to flow up over that center tube and over flow into the filler to fill the carto. just my 2c.
Lots of us around here in Reoville don't fill the cartos first. Many have tried this and it seems to make the cartos last a lot longer.
Just put it on, give two or three squonks while drawing before firing. The filler does not need to soak. You only need the juice to surround the coil. Great taste and vapor when done this way!
Here is a cartos that has been used about 24 hours, not filled!
With an atty, you need to keep it wet. Put in a few drops, then draw and squonk before the first hit.
Just put it on, give two or three squonks while drawing before firing. The filler does not need to soak. You only need the juice to surround the coil. Great taste and vapor when done this way!
Here is a cartos that has been used about 24 hours, not filled!
With an atty, you need to keep it wet. Put in a few drops, then draw and squonk before the first hit.
This isn't accurate. The juice does not have to flow up and over the center tube to soak into the filler.
The center tube is fashioned from the filler material. Squonking juice into the carto gets it directly to the filler.
If you carefully take apart carto and the diaper you will see the coil(single coil) inside the diaper and its only about 1/3 the way up the carto from the screw in end, with Reo only really need to keep bottom half of carto wet. If you fill carto and soak it to the top I have found this to be the way to kill my cartos. Didn't understand this until I got clear cartos. Good Luck.
I pre-fill. There's only one reason why. The mini has a 3 ml bottle - a carto holds about a ml - I use about 3.5 ml most days while I'm working. Prefilling means I don't have to carry anything but a spare battery.
An interesting note for this topic - There is now a micro version of the resurrector carto called the super shorty 1.7 ohm. It is 26 total mm long including the connector: 20 mm long above the connector. The regular resurrectors are 48 mm long total: 42 mm above the connector.
An interesting note for this topic - There is now a micro version of the resurrector carto called the super shorty 1.7 ohm. It is 26 total mm long including the connector: 20 mm long above the connector. The regular resurrectors are 48 mm long total: 42 mm above the connector.
I knew Andrew @ CCV was supposed to get some of these short resurrectors. Where did you get yours? Thanks.
Cool, I picked up 5 of them to try out before I order a bunch. Hope they work well. I've always liked and used the XL Resurrectors on my 3.7 non feeders.
Another vote for pre-filling a carto. It's one of the only ways to avoid the dangers associated with cartos. Anyways, the only difference between a carto and atty. Is that you prolong the squonk for about 2 seconds with a carto. While with an atty, you should immediately stop when you hear the gurgle.
I got my "shorty" Resurrectors yesterday. Haven't had a chance to try one yet, due to being a bit ill, haven't been vaping much. Just thought I'd mention that they are 25.3ml overall length, compared to the 28ml length of a Joye atty. Hopefully be able to try one before to long.
Last edited:
i also pre fill my cartos....but with a smaller amount....just to get a little liquid in there and soaked in before I use it...habit I guess..lol..I have tried it both ways...and this is just my preference..
Let us know how they work and where did you get them from. Thanks.
Stilll haven't gotten around to trying it yet, but I will in the next day or two. I got these from Madvapes. I'm waiting for CCV to get some in and will order a larger quanity from them on my next monthly order.
Great looking REO you got. Interested in getting a couple of those short resurrectors too but, they're sold out right now. I think but, when they get them back in stock. I'll definitely give a couple of them a try. The XL versions just look funny on a REO IMO. Rather use those on my other mods.
Thanks. Yeh, using a XL on there seems such a waste, course didn't use to have a choice, and the shorty look, looks better.
- Status
Similar threads
- Locked
