Step into the Zone with Vapingzone

Status
Not open for further replies.

mgmrick

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2010
2,813
2,369
66
New York
Anyone know if the body can be soaked to clean the innards? Its mechanical after all.


Neon

Through operator error I got some juice in my switch. I was having miss fires. I filled a shot glass with everclear and soaked the switch end in the everclear overnight. Let it air dry and has worked perfect for the last 10 hours no miss fires
 
Last edited:

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com

Neon

Ultra Member
ECF Veteran
Nov 8, 2009
1,047
109
Earth
Through operator error I got some juice in my switch. I was having miss fires. I filled a shot glass with everclear and soaked the switch end in the everclear overnight. Let it air dry and has worked perfect for the last 10 hours no miss fires


Thanks Rick, thats exactly whats been happening, just a bit of goo on the switch. Thanks for the reply!



Neon
 

mgmrick

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2010
2,813
2,369
66
New York

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
Just arrived today.....get yours now they wont last long....

VZ VV eGo 3 to 6 Volt E-Cig Mod Kit
Sale price: $79.99
List price: $99.95
You Save20%
Quantity:

VZ VV eGo 3 to 6 Volt E-Cig Mod Kit

Kit Contains :

One VV body

two high ohm atomizers (3.3ohms)

Two High Drain and quality 18650 Batteries

one Normal 18650 Battery Charger

one normal Gift Box

Features :

On/Off (Small Red Power Button):

Press and hold for 5 seconds to turn on device

Press and hold for 5 second to turn off device

(+) Button:

On press, increases voltage by .1 increment between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts

(-) Button:

On press, decreases voltage by .1 increment between 3 volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts

(+) and (–) Button:

Press and hold both buttons for five second to disable the + and – button

Features:

· Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.

· If the activation button is held down for 10 seconds or longer, the VV will shut itself off until the button is released.

· Short Circuit/Atomizer Protection

· Reverse Battery Protection - Protects against reverse battery installation.

· Battery Monitoring/Over-Discharge Protection – Device should monitor the battery voltage and automatically turn off when the battery is discharged.

· Amperage Limiting to 2.5 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.

· Vent hole on the bottom of the device for added safety

Warranty and Replacement info:

14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.

http://www.vapingzone.com/VZ_VV_eGo_3_to_6_Volt_E-Cig_Mod_Kit/pid-315.html
 
Last edited:

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
Also the mini........

MINI-VZ VV eGo 3 to 6 Volt E-Cig Mod Kit
Sale price: $79.99
List price: $99.95
You Save20%
Quantity:

MINI-VZ VV eGo 3 to 6 Volt E-Cig Mod Kit

The Mini is 30mm shorter than the original and uses a single 18350 high-drain battery.

Kit Contains :

One VV body

two high ohm atomizers (3.3ohms)

Two High Drain and quality 18350 Batteries

one Normal 18350/18650 Battery Charger

one normal Gift Box

Features :

On/Off (Small Red Power Button):

Press and hold for 5 seconds to turn on device

Press and hold for 5 second to turn off device

(+) Button:

On press, increases voltage by .1 increment between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts

(-) Button:

On press, decreases voltage by .1 increment between 3 volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts

(+) and (–) Button:

Press and hold both buttons for five second to disable the + and – button

Features:

· Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.

· If the activation button is held down for 10 seconds or longer, the VV will shut itself off until the button is released.

· Short Circuit/Atomizer Protection

· Reverse Battery Protection - Protects against reverse battery installation.

· Battery Monitoring/Over-Discharge Protection – Device should monitor the battery voltage and automatically turn off when the battery is discharged.

· Amperage Limiting to 2.5 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.

· Vent hole on the bottom of the device for added safety

Warranty and Replacement info:

14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.

http://www.vapingzone.com/MINI-VZ_VV_eGo_3_to_6_Volt_E-Cig_Mod_Kit/pid-342.html
 
Last edited:

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
Just the body....no batteries included.....make sure to use high drain batteries...

VZ VV eGo 3 to 6 Volt E-Cig Mod Body only
Sale price: $49.99
List price: $69.95
You Save29%
Quantity:

VZ VV eGo 3 to 6 Volt E-Cig Body only


One VV body

Features :

On/Off (Small Red Power Button):

Press and hold for 5 seconds to turn on device

Press and hold for 5 second to turn off device

(+) Button:

On press, increases voltage by .1 increment between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts

(-) Button:

On press, decreases voltage by .1 increment between 3 volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts

(+) and (–) Button:

Press and hold both buttons for five second to disable the + and – button

Features:

· Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.

· If the activation button is held down for 10 seconds or longer, the VV will shut itself off until the button is released.

· Short Circuit/Atomizer Protection

· Reverse Battery Protection - Protects against reverse battery installation.

· Battery Monitoring/Over-Discharge Protection – Device should monitor the battery voltage and automatically turn off when the battery is discharged.

· Amperage Limiting to 2.5 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.

· Vent hole on the bottom of the device for added safety

Warranty and Replacement info:

14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.

http://www.vapingzone.com/VZ_VV_eGo_3_to_6_Volt_E-Cig_Body_only/pid-316.html
 
Last edited:

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
We have been testing through out the day.

These are working very good

Vaping at 6 volts on the lcd screen using 2 ohms twin coils.....tons of vape.

We have compared these to our vz mod at 6 volts and feel the vapes are very close to the same.

Get yours now we expect them not to last very long on the shelf.....

Link for the regular sized vv mod

http://www.vapingzone.com/VZ_VV_eGo_3_to_6_Volt_E-Cig_Body_only/pid-316.html
 
Last edited:

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
And the mini vz vv ego 3 to 6 volt body only....use only high drain batteries

MINI-VZ VV eGo 3 to 6 Volt E-Cig Mod Body only
Sale price: $49.99
List price: $69.95
You Save29%
Quantity:

MINI-VZ VV eGo 3 to 6 Volt E-Cig Body only

The Mini is 30mm shorter than the original and uses a single 18350 high-drain battery.

One VV body

Features :

On/Off (Small Red Power Button):

Press and hold for 5 seconds to turn on device

Press and hold for 5 second to turn off device

(+) Button:

On press, increases voltage by .1 increment between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts

(-) Button:

On press, decreases voltage by .1 increment between 3 volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts

(+) and (–) Button:

Press and hold both buttons for five second to disable the + and – button

Features:

· Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.

· If the activation button is held down for 10 seconds or longer, the VV will shut itself off until the button is released.

· Short Circuit/Atomizer Protection

· Reverse Battery Protection - Protects against reverse battery installation.

· Battery Monitoring/Over-Discharge Protection – Device should monitor the battery voltage and automatically turn off when the battery is discharged.

· Amperage Limiting to 2.5 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.

· Vent hole on the bottom of the device for added safety

Warranty and Replacement info:

14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.

http://www.vapingzone.com/MINI-VZ_VV_eGo_3_to_6_Volt_E-Cig_Body_only/pid-343.html
 

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com

louielouie

Registered Supplier
ECF Veteran
Feb 23, 2011
842
247
South Carolina USA
www.vapingzone.com
Status
Not open for further replies.

Users who are viewing this thread