Less is more. Not only goes for Charmin, but cotton as well. What's your build, watts, etc?
Supreme RDTA by Steam Crave
- Thread starter Petabread
- Start date
- th_trl_thread_readers 0
- Status
Less is more. Not only goes for Charmin, but cotton as well. What's your build, watts, etc?
3mm ID, dual fused Clapton (UD wire), 6 wraps. Running it anywhere from 60 to 90 watts. If I put less cotton I get flooding, turn the juice flow down and get poor wicking. When I put more wick I can open the juice flow up but it still results in charred wicks by mid day. Using rayon for wick. Like I said, I have a slew of tanks and have been rebuilding for close to 2 years. This style tank just really has my number I guess.
Just got my V2 a few days ago. Lots to like with this delivery device.
I have a question: I ran dual Claptons in both vertical and horizontal configuration. Wicked with KGD using the prebuilt UD coils. ID 2.6 and I ran around 60 watts. I'm getting dripping juice out of the AFC. I played with the JC and AFC settings and no help. This is 65/35 juice. It's not vapor perspiration but juice. Any tips? Then I switched to a vanilla dual Kanthal horizontal build with KGD and no more juice leaks. Great vape! I'm stumped and would appreciate any tips. Here is a pic of the old build which produces juice dribbles out of the AFC:
I have a question: I ran dual Claptons in both vertical and horizontal configuration. Wicked with KGD using the prebuilt UD coils. ID 2.6 and I ran around 60 watts. I'm getting dripping juice out of the AFC. I played with the JC and AFC settings and no help. This is 65/35 juice. It's not vapor perspiration but juice. Any tips? Then I switched to a vanilla dual Kanthal horizontal build with KGD and no more juice leaks. Great vape! I'm stumped and would appreciate any tips. Here is a pic of the old build which produces juice dribbles out of the AFC:
oh, seems I missed this page. I too was able to fit 24/32 calptons 4mm ID X 6 wraps into my build with little issue. simply pushed the coils slightly up and presto wonderful vape! only complain is with that size the airflow was slightly restricted. still playing around with builds trying to get the perfect vape but so far im loving this tank.
EDIT* wrong picture posted, I'll update it once I find the need to redo my build.
EDIT* wrong picture posted, I'll update it once I find the need to redo my build.
Attachments
So...I was stuck in one of those interstate traffic jams...the kind where you go 1 mile in 1 hour. I managed to empty the Supreme by the time I found an escape exit.
So...I was stuck in one of those interstate traffic jams...the kind where you go 1 mile in 1 hour. I managed to empty the Supreme by the time I found an escape exit.
Yep. The Supreme is 'supremely' efficient. Definitely chugs the juice.
Just got my Supreme V2 a few days ago. YEA! This puppy consumes juice big time. Decided to try a quick experimental build with dual Kanthal + KGD and stuff stuff stuff. About 0.7 OHMs. This build actually produces a really great vape. The flavor/vapor is moist and rich. Very rich! Then the clouds, but I'm not really into fogging up central park. /lol No leaky, no dry hits, no gurgling, and no spitback The juice is 65% PG and 35% VG. Yea, I know. Where is Mr. Clapton? I ordered a spool from LV. It will be very interesting to compare this build with Mr. Clapton. That's going to be a tough act to follow but I'm ready to try.
New atomizer, new bells & whistles, new learning curve. lol
Received my Aromamizer Supreme a couple hours ago, washed, built with dual 26g SS 316L, KGD wicks, resistance set to 0.00091, filled and vaping. She's a beastie and drinks my eliquid faster than an Irish man drinking green beer on St. Patricks Day. lol
Little bit of a gurgle but I still have to tune the juice flow control.
Received my Aromamizer Supreme a couple hours ago, washed, built with dual 26g SS 316L, KGD wicks, resistance set to 0.00091, filled and vaping. She's a beastie and drinks my eliquid faster than an Irish man drinking green beer on St. Patricks Day. lol
Little bit of a gurgle but I still have to tune the juice flow control.
I have noticed my Aromamizer Supreme has a bit of a wiggle to it. Anyone else have this?
Bunch of those went out with bad o-rings on the deck. Swap it for one in the spares bag and you should be ok.
Also, make sure everything is screwed down firmly. I had this and originally thought it was the 510 connection but I took it apart and reassembled everything and no wiggle since.
Swap the deck oring with a 14mm oring that was included in the spare bag
Woot, just got my Supreme! One thing I noticed right off the bat is that the 510 pin sticks out a bit and I get quite a bit of resistance trying to screw it down all the way on my Reuleaux. I can't scew it down all the way cause I am afraid it might damage the Reuleaux. Not a big deal and not really the Supreme's fault, but something to consider.
Right now I have a 24g 3.5mm 13 wrap ss326L build in it. Haven't vaped it yet, but will report back when I do.
Edit - Yes it does indeed screw all the way down now.
Right now I have a 24g 3.5mm 13 wrap ss326L build in it. Haven't vaped it yet, but will report back when I do.
Edit - Yes it does indeed screw all the way down now.
Last edited:
Ok, first thing I noticed was, since you can't screw it down all the way on the Reuleaux, trying to adjust the juiceflow and trying to screw the top cap off to refill is iffy. The Supreme can't be screwed on tight, so it will unscrew itself when trying to do these 2 things.
First thing I'm gonna do is try to shorted the 510 pin. Looks like the insulator and maybe the pin is too long, gonna see it can be sanded down.
Edit - Yes it does indeed screw all the way down now, without modification.
First thing I'm gonna do is try to shorted the 510 pin. Looks like the insulator and maybe the pin is too long, gonna see it can be sanded down.
Edit - Yes it does indeed screw all the way down now, without modification.
Last edited:
For the record I have the Supreme on a DNA 200 Reuleaux and just tried it on the RX200 as well...not having any issues with the pin being too long. It screws down totally flush.
- Status
