Syringe Holder 18650 Tube Mod

[Connman]

Now my sister found this at the local Animal Feed store. So again thank you sister. And it was only 60 cents for the syringe and all.
Now since I needed a place to stick that nice new 18650 2400mAh battery with flames on it. This works great for now. Actually very comfortable in the hand. The syringe will fit a 14500.

This mod holds a 18650, LED and has a 510 connector on it. The switch is a press fit switch from madvapes.
Mini Black Plastic Push Button Switch

The Syringe holder into a mod

The syringe and tube for 60 cents from the local Animal FEED store.

So not only do these work for a completed battery mod but previously on ECF there was a pssthrough made with a tube very similar to this.
http://www.e-cigarette-forum.com/forum/battery-mods/92173-i-made-ugliest-usb-801-passthrough.html

Now back to other mod building now in progress.

 

[Sci]

Now that is kool. Plain, pure, & simple. Is that a 12cc syringe?

 

[laborer75]

Very inventive. Thats gotta be one of the cheapest PV's to make. Great job!!!

 

[Connman]

Thanks for the replies,

Now that is kool. Plain, pure, & simple. Is that a 12cc syringe?

Yes 12cc syringe it is.

 

[misterD]

hey! this is a good thing to use in place of the PVC for a JB!!! im at work now so lemme go take a look at what we have here!

 

[Chiqa]

I love it! Seems like it is one step closer to waterproof for kayaking

 

[dreams n chains]

I want to see how well they'll melt and paint! But shhhhh, I don't think Connman knows that yet.

There is also the possibility that a paper with an image of choice could be cut to fit, rolled up and stuck inside to give the vaper unlimited personalized variations!

Guess he's gonna experiment with some of his ideas.

 

[CloudBurst]

Is nothing sacred?? LOL Love it!

 

[Parky50]

Now, that's one sweet little Mod...
Great job thinking "outside the box" !!!

 

[Sci]

You going to make one out of the syringe also? 2 mod bases for $.60. Can't beat that with a stick Great find, connman!

 

[dreams n chains]

You going to make one out of the syringe also? 2 mod bases for $.60. Can't beat that with a stick Great find, connman!

Not only that but the needle is large enough to get e-liquid through! Bottom feed? Juice injection box? File the point off and use like 42109 does by sticking it on a dropper bottle and using it for those who drip?

Many uses!

 

[Chiqa]

I would bribe someone to come up with 3/7v mod that is mostly waterproof so I can just put it into my pfd pocket without some of the bizarre things I have been coming up with for carrying my mods.

 

[dreams n chains]

hey! this is a good thing to use in place of the PVC for a JB!!! im at work now so lemme go take a look at what we have here!

I gotta get out more and read more posts! You always come up with some great ideas MisterD!

umm.... not referring to borrowing from work kinda ideas....

 

[Connman]

My sister mentioned this idea and it works rather well. These can easily be decorated although it fits a little snug with any cut piece of paper as I did below. Just need to slide it in with the battery at the same time.
Now I`m wishing I didn`t use that big white plug for the positive contact to be on for this.

Cut out of a Nascar magazine,

Life Savers wrapper,

 

[Connman]

And yes Sci it`s two mod tubes for 60 cents. Plus additional higher priced parts.

And Chiqa I think that`s right on track a syringe type PV would be as close to a water tight device I can think of. I`ll for sure look into this and let you know if I come up with anything soon. A good switch and what a possible cover for the atty?
I think the battery being in the syringe would be water tight with a sealed connector so that part is simple.

Then there is MisterD. That idea sounds really good with it replacing the PVC it seems easily shaped with a little heat. I`m sure my sister will play with that idea she likes melting things.

 

[Sci]

And yes Sci it`s two mod tubes for 60 cents. Plus additional higher priced parts.

Those additional parts don't count, you had them laying around.

And Chiqa I think that`s right on track a syringe type PV would be as close to a water tight device I can think of. I`ll for sure look into this and let you know if I come up with anything soon. A good switch and what a possible cover for the atty?
I think the battery being in the syringe would be water tight with a sealed connector so that part is simple.

Then there is MisterD. That idea sounds really good with it replacing the PVC it seems easily shaped with a little heat. I`m sure my sister will play with that idea she likes melting things.

LOL...

 

[CloudBurst]

You could just glue the pic to your battery, put a different one on each one! I love this! But...no juice!

 

[dreams n chains]

You could just glue the pic to your battery, put a different one on each one! I love this! But...no juice!

LoL! That's what I said when he was kind enough to ask me if I wanted to try it.

I was, like, "But there's no e-liquid injection."

He'll understand if I ever get his juicers finished for him to try. I'm too busy making them pretty and shiny and all to conn him away from his various collection of mods.

Now.... besides fighting over the 18650 batteries.... we're going to be fighting over 60¢ tubes!

 

[Sci]

This looks like it would be relatively easy to mount a juice bottle to it?

 

[misterD]

think mAhmba or Juice Machine Mk3