$7.20 Accessory Set for GT 3 RTA Atomizer (4 Pieces) - stainless steel + PEI at FastTech - Worldwide Free Shipping
Sent from my ONEPLUS A3003 using Tapatalk
- Status
Sent from my ONEPLUS A3003 using Tapatalk
is there any place where you can buy the Version I or version II, or their clones.
Yep GT v3 is the best version
To get especially for price easier to build wick ,
has option of more Airflow if needed,
V2 was very nice ,
but a pain in some ways,
Sent from my ONEPLUS A3003 using Tapatalk
Anyone want to hazzard a guess on when the GT4 clones will show up? I am too cheap to buy the real deal, but very anxious to try the GT4! The GT3 has been my go to for over a year now.
Word has it that someone in here has the Asmodus Lustro? Because I love Asmodus and have a few Minikens I was considering getting the Teal Lustro. Any thoughts on it from anyone?
Anybody know where to get replacement parts for the GT 3? I order some screws and what I'm gonna call the white top hat, the 510 insulator from fast tech- but nothing fit 
For the record, I'm trying to use these in three clones I have. I don't remember where I got them from but I wanna say fast tech. One stainless 316, one stainless 304 and one black 316.
BTW I can't wait until the GT4 starts shipping [emoji16]
Sent from my SM-G950U using Tapatalk
For the record, I'm trying to use these in three clones I have. I don't remember where I got them from but I wanna say fast tech. One stainless 316, one stainless 304 and one black 316.
BTW I can't wait until the GT4 starts shipping [emoji16]
Sent from my SM-G950U using Tapatalk
USPS is killin' me
The GT2 was always one of my favorites, and for whatever reason, I completely bypassed the GT3 (which turns out was a huge mistake, d'oh), and all I want is some Taifun action back in my life.
On a side note, I got a pretty neato mod to pair it with (really rollin' the dice on this one, but SmokerStore hasn't let me down yet). Maybe by next month I'll be able to use them together
Sent from my Pixel 2 XL using Tapatalk
The GT2 was always one of my favorites, and for whatever reason, I completely bypassed the GT3 (which turns out was a huge mistake, d'oh), and all I want is some Taifun action back in my life.
On a side note, I got a pretty neato mod to pair it with (really rollin' the dice on this one, but SmokerStore hasn't let me down yet). Maybe by next month I'll be able to use them together
Sent from my Pixel 2 XL using Tapatalk
Whelp, it FINALLY arrived today
The Box is still en route, but luckily enough, this Slim is actually 25mm on the top, so it's a tidy fit!
Really enjoying my first tank through it!
Sent from my Pixel 2 XL using Tapatalk
The Box is still en route, but luckily enough, this Slim is actually 25mm on the top, so it's a tidy fit!
Really enjoying my first tank through it!
Sent from my Pixel 2 XL using Tapatalk
Nice! Let us know how that baby works for you.Whelp, it FINALLY arrived today
The Box is still en route, but luckily enough, this Slim is actually 25mm on the top, so it's a tidy fit!
Really enjoying my first tank through it!
Sent from my Pixel 2 XL using Tapatalk
I finally managed to get my hands on GT IV. It's definitely a different vape than GT III which was my favorite RTA for a long time. It feels more airy and bulky. It reminds me the kind of vape I got from Taifun BT, the mesh RTA they released last year.
Installing a coil is extremely easy and the new build deck can accommodate thicker coils. I used a 24ga SS316L wire, spaced and 3mm diameter. Wicking is also quite simple and you can be quite generous with your cotton length in this one.
Flavor is solid as to be expected from Taifun, but getting a tight draw like you could with GT III is a bit more difficult. But then again, I couldn't test it properly, because the airflow ring is far too tight that I have a really difficult time turning it.
Both the airflow and the liquidflow rings can be removed. Each has a o-ring under them. The liquidflow ring is also quite tight but putting some liquid on the o-ring under it usually fixes it. Not with the airflow ring... No matter what I tried I can't turn that thing unless I apply extreme force. I can turn it for a minute or two after I put some liquid on the o-ring underneath but after that it gets stuck again. And yes, I did change the o-ring with one of the spares.
So all in all, it looks like a solid tank but the airflow adjustment is quite difficult which can be listed as a minor inconvenience.
Installing a coil is extremely easy and the new build deck can accommodate thicker coils. I used a 24ga SS316L wire, spaced and 3mm diameter. Wicking is also quite simple and you can be quite generous with your cotton length in this one.
Flavor is solid as to be expected from Taifun, but getting a tight draw like you could with GT III is a bit more difficult. But then again, I couldn't test it properly, because the airflow ring is far too tight that I have a really difficult time turning it.
Both the airflow and the liquidflow rings can be removed. Each has a o-ring under them. The liquidflow ring is also quite tight but putting some liquid on the o-ring under it usually fixes it. Not with the airflow ring... No matter what I tried I can't turn that thing unless I apply extreme force. I can turn it for a minute or two after I put some liquid on the o-ring underneath but after that it gets stuck again. And yes, I did change the o-ring with one of the spares.
So all in all, it looks like a solid tank but the airflow adjustment is quite difficult which can be listed as a minor inconvenience.
Finally arrived, Taifun Box!
Dicodes chip inside of a box built like a tank!
This is pretty sweet!
Edit...sorry, no idea why the photos uploaded through Tapatalk didn't go through, but here is one of the setup.
Sent from my Pixel 2 XL using Tapatalk
Dicodes chip inside of a box built like a tank!
This is pretty sweet!
Edit...sorry, no idea why the photos uploaded through Tapatalk didn't go through, but here is one of the setup.
Sent from my Pixel 2 XL using Tapatalk
Attachments
Last edited:
All on Fasttech all spares look up Taifun GTV3 on there all parts stripped down are availableAnybody know where to get replacement parts for the GT 3? I order some screws and what I'm gonna call the white top hat, the 510 insulator from fast tech- but nothing fit
For the record, I'm trying to use these in three clones I have. I don't remember where I got them from but I wanna say fast tech. One stainless 316, one stainless 304 and one black 316.
BTW I can't wait until the GT4 starts shipping [emoji16]
Sent from my SM-G950U using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Its not a cheap mod but sadly wont be able to buy that or the GTv4 unless clones , no one ships UKFinally arrived, Taifun Box!
Dicodes chip inside of a box built like a tank!
This is pretty sweet!
Edit...sorry, no idea why the photos uploaded through Tapatalk didn't go through, but here is one of the setup.
Sent from my Pixel 2 XL using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
OMGEE beautiful!Finally arrived, Taifun Box!
Dicodes chip inside of a box built like a tank!
This is pretty sweet!
Edit...sorry, no idea why the photos uploaded through Tapatalk didn't go through, but here is one of the setup.
Sent from my Pixel 2 XL using Tapatalk
- Status
Similar threads
- Locked
