Alright, I pulled the trigger and ordered a DIY kit and some flavoring! My newest question is whats the best way to taste test my creations? I have had little success so far with take'n the filler out of a cartridge and the cart still working. What else can I use with minimum fuss to taste my creations before I make a bottle, without filling a cart? I hope I'm make'n sense here......
Taste Testing
- Thread starter Cuzinshaggy
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo smokeless image
- Status
I will gladly test your creations, maybe then i will find my all day vape......lol
But seriously, i am very new to this, but IMHO dripping onto a 510 LR brings the best of a flavor to me
But seriously, i am very new to this, but IMHO dripping onto a 510 LR brings the best of a flavor to me
The best way to do that is to drip directly onto the atty. Besides that, 510-T tanks are kind of OK. Can't think of anything else that wouldn't result in a massive waste of hardware and/or liquid.
A couple drops on the atty is probably the way almost all of us taste flavors. Nothing like a quick easy flavor change with no waste or trouble, plus sometimes the change in flavors blends two into one new one you might like! Welcome to dripping!
I'll chime in and say...
that a few drips into an attomiser is the easiest way to test flavors ....
hmmm & "carts" as you put it ...
sounds like you are talking about cartomisers ???
(atty& cart all in one unit w/poly filler )
& yeah they are not the most economical way to
taste test flavors (too hard to clean)
you would just have to vape up what ever juice you put in there ...
another diy tip is ...
make your juices w/out nic base to start,
add the nic base after you think you
have the flavor where you want it
....then adjust flavor from there.
that a few drips into an attomiser is the easiest way to test flavors ....
hmmm & "carts" as you put it ...
sounds like you are talking about cartomisers ???
(atty& cart all in one unit w/poly filler )
& yeah they are not the most economical way to
taste test flavors (too hard to clean)
you would just have to vape up what ever juice you put in there ...
another diy tip is ...
make your juices w/out nic base to start,
add the nic base after you think you
have the flavor where you want it
....then adjust flavor from there.
Just use an atomizer. 901s or 510s work well for taste testing since they are simple to clean and use.
Yea, I meant cartomisers. I actually got the filler out of a cartomiser without ruining it and it seems to be working good. Thanks for the tip about not use'n any nic also! The thought hadn't crossed my mind, but that would be a whole lot cheaper! Thanks guys for the guidance!
I couldn't find it. Thought he had them.
You can get an atomizer at Good Prophets and a drip tip.
Spare Atomizer for GP901
You can get an atomizer at Good Prophets and a drip tip.
Spare Atomizer for GP901
Thanks for the link and helping me look!!!! I was searching too and all I could find was GotVapes Fluxomizers. On a side note my cartomiser with the filler removed seems to be doing the trick for now!
That's good, and cheaper too! I'm almost positive he did have them at one time. Maybe he doesn't carry them anymore. According to everyone on the board, a 901 will work with a KR808. Don't you love the numbers!
BTW dripping is not recommended on auto batteries.
Use a manual battery with a well-sealed threaded end
510 - use a 510 manual or 510 mega xl manual with 510 normal (non-T) standard resistance atty and drip tip (and if you have 510-T do not charge any other 510 or EGo batteries ont eh 410-T charger cable - it will fry them)
KR808D-1 - the current Vapor4Life and standard manufacturer manuals should be fairly well sealed, and the Smokeless Image Volt manuals are totally sealed. Use a standard resistance DSE901 atty with no adapter (or 510 standard resistance w/ an adapter) with a 510/901 drip tip
It's not perfect for testing unless you have a lot of clean attys. With one you can blow it out between flavors then try the new flavor. With totally sealed manuals (and i would only do this if you have a spare atty) you can blow out the atty and run water through it, shake and blow it out, blow through it a it to dry it, reprime, wait and try another flavor.
Use a manual battery with a well-sealed threaded end
510 - use a 510 manual or 510 mega xl manual with 510 normal (non-T) standard resistance atty and drip tip (and if you have 510-T do not charge any other 510 or EGo batteries ont eh 410-T charger cable - it will fry them)
KR808D-1 - the current Vapor4Life and standard manufacturer manuals should be fairly well sealed, and the Smokeless Image Volt manuals are totally sealed. Use a standard resistance DSE901 atty with no adapter (or 510 standard resistance w/ an adapter) with a 510/901 drip tip
It's not perfect for testing unless you have a lot of clean attys. With one you can blow it out between flavors then try the new flavor. With totally sealed manuals (and i would only do this if you have a spare atty) you can blow out the atty and run water through it, shake and blow it out, blow through it a it to dry it, reprime, wait and try another flavor.
Last edited:
- Status
Similar threads
