How come when I put these in the SS GGTS they don't work? In my GGTB they work just fine, I removed the spring and still nothing... My lifepo4 tenet us are working just fine in the GGTS though.
Tenergy RCR123A li ion
- Thread starter Titan Vapes
- Start date
- th_trl_thread_readers 0
- Status
Are they 3.7V? I use the 3v all day every day. Have you tried the batts in a different mod? The PCB may have tripped for some reason. I really think that is an issue with one of your batts.
Thats strange!!
I thought it maybe the the positive connector on the li-on's but you say they work in your GGTB.
I have some 3.6 ultrafires and these work fine as do my Tenergy Lifepo's
Do you think they may not be making a connection with the Atomizer pin worth checking especially if the positive connector on the battery is slightly recessed as the pin might be just making contact with the sleeve
I thought it maybe the the positive connector on the li-on's but you say they work in your GGTB.
I have some 3.6 ultrafires and these work fine as do my Tenergy Lifepo's
Do you think they may not be making a connection with the Atomizer pin worth checking especially if the positive connector on the battery is slightly recessed as the pin might be just making contact with the sleeve
Last edited:
Sorry, forgot what you said about the TB when I went to post.
Do the batts have the nipple or are they flat? Could be a centering issue. My GF bent the positive pin on her aluminum GG and was having inconsistent batt issues, but I would think that the batts would give before the SS. If they are flat top batts, you could try a small magnetic batt spacer on the positive side of the batt between the batt and the positive pin.
Here is a little more info;
SS GGTS- with green lifepo4 batts works and fires just fine. Using the blue 3.0 liion rcr 123a's no fire, these are not flat top batteries and it looks like they are making a good connection, I'm using the same atty and everything under both conditions.
SS GGTS- with green lifepo4 batts works and fires just fine. Using the blue 3.0 liion rcr 123a's no fire, these are not flat top batteries and it looks like they are making a good connection, I'm using the same atty and everything under both conditions.
maybe it's a problem of battery protection, do you use the same atomizer on GGTB and GGTS?
Are they the same with the spring in?
i have left my spring in for all my battery combos
i have left my spring in for all my battery combos
My advice, use AW batteries and you don't have these issues 
personally I think the tenergy batts suck
personally I think the tenergy batts suck
I am using the blue tenergy batts right now. Something must be tripping the PCB. Reset the bats by putting them in the charger and try a higher ohm, or just different, atty. That is the only thing I can think of.
If you have a multimeter or some way of checking resistance, check that atty. If it is in a UFS, you can just check at the connectors where it attaches to the GGTS. I think that the amp draw may be too high, but the Chem of the LiFeP04's has a high enough rating to fire the atty, but it is too much for the PCB on the Blues.
If you have a multimeter or some way of checking resistance, check that atty. If it is in a UFS, you can just check at the connectors where it attaches to the GGTS. I think that the amp draw may be too high, but the Chem of the LiFeP04's has a high enough rating to fire the atty, but it is too much for the PCB on the Blues.
Are you trying to run an atty under 2 Ohm, if so they won't work, it trips the PCB into thinking there is a short with LR attys. Given that they work in your GGTB (if with the same atty) I honestly have no idea. I know mine won't fire 1.5 Ohm atys or dual coil cartos.
tpa, please put batteries inside GGTS and start to screw the telescope slowly by pushing the button at the same time. If you hear GG working in a position of the telescope and when you screw it more it doesnt work that means that pcb of the battery is problematic.
I have the exact same problem with my new SSGgTS. I'm using 2 Tenergy cr123a as well, the blue and silver bats.
When it's tightened all the way, nothing. When slightly tightened, I get very faint vapor...?
Okay, I tried it with out my UFS, and there is zero vapor, no activated atty, loosened or tightened telescope...? These are brand new bats too, and I know they work.
- Status
Similar threads
