The $1 juice pump mod!
- Thread starter MoonMan
- Start date
- th_trl_thread_readers 0
- Status
Yeah I really hate having to fill while driving and thats always been when I smoked the most So I'm all about the easiest most user friendly mod I wanna be able to pretty much fuss with it once at night when I get my lunch and other work stuff ready and have it just work till the next night you know MoonMan I gotta say thanks for sharing your tinkering
Ahhh a narb. Is he a hunter or a mage?
As far as the mod, if this works as good as you say this is easily one of the best mods. It has to be - that is my biggest complaint; having to constantly fill/top off the cart, I'm talking 5-6 good, deep vapes and I need to open 'er up and put juice. Even if you had to pump every single time you took a drag this thing would be worth it.
I'm eager to hear from others that have made it and how it performs for them, I'm a nub - about to do a nicostick (first mod), I would LOVE to have an effective refiller like this.
Thumbs up man!
As far as the mod, if this works as good as you say this is easily one of the best mods. It has to be - that is my biggest complaint; having to constantly fill/top off the cart, I'm talking 5-6 good, deep vapes and I need to open 'er up and put juice. Even if you had to pump every single time you took a drag this thing would be worth it.
I'm eager to hear from others that have made it and how it performs for them, I'm a nub - about to do a nicostick (first mod), I would LOVE to have an effective refiller like this.
Thumbs up man!
We play MMORPGs it's what we do instead of going to the movies or out to eat and stuff. We game. His chair sits back-to-back with mine. It's the only way our desks will fit in this little room.
He hears "Wait! Don't hit anything, I need to drip on my cartridge" ONE SPLIT SECOND after he hits the "attack" button. Party wiped. (AKA, we're all dead)
Sometimes it's not necessarily lazy. (Although I do admit to that)
Sometimes it's a needed improvement.
I think this would also be awesome for people who commute or drive for a living. (TDMouse comes to mind)
Last edited:
He has a hunter (bear to tank) I have a hunter (Wold to DD)
We both have Paladins. He has a Warlock, I have a mage.
He has a rouge and I have a Priest.
Right now we're playing the hunters. And the priest.
I was wondering...He's done some very simple box mods, and I've ordered the bottles.
We'll see.Now all we have to do is figure out the tubing from the bottle to the cart. How do you not get it to leak when you pump it. (Or spray it. She had 4ml pumps and 2ml sprayers) I got some of each.
Do you wallow out the hole and stick the tubing in and epoxy all that in place, making on the bottom changeable? (And the cart, obviously)
Can you go into a little bit further depth about how to connect the tube that goes to the cart to the pump/sprayer? Please?
Thanks so much ~ P
We both have Paladins. He has a Warlock, I have a mage.
He has a rouge and I have a Priest.
Right now we're playing the hunters. And the priest.
I was wondering...He's done some very simple box mods, and I've ordered the bottles.
We'll see.Now all we have to do is figure out the tubing from the bottle to the cart. How do you not get it to leak when you pump it. (Or spray it. She had 4ml pumps and 2ml sprayers) I got some of each.
Do you wallow out the hole and stick the tubing in and epoxy all that in place, making on the bottom changeable? (And the cart, obviously)
Can you go into a little bit further depth about how to connect the tube that goes to the cart to the pump/sprayer? Please?
Thanks so much ~ P
The tubing is simply press-fitted into the hole that it used to spray out of (after I drilled it bigger of course). It's not a high-pressure system and the juice is fairly viscous so leaking isn't an issue. Please look at post #13 in this thread.
It holds by friction, no glue, no leaking - and it can be dissembled. It's a very simple design.
I have since moved on from this prototype to the UPAC (see my sig). Slightly different setup (the tubing hole is drilled into the top of the sprayer rather than the side) but it's the same idea. My first UPAC is still going strong - the only problem I've had is that the battery cover keeps falling off. I've had to start screwing it down, which is fine since I only need to open it about once a week to charge the batteries.
It holds by friction, no glue, no leaking - and it can be dissembled. It's a very simple design.
I have since moved on from this prototype to the UPAC (see my sig). Slightly different setup (the tubing hole is drilled into the top of the sprayer rather than the side) but it's the same idea. My first UPAC is still going strong - the only problem I've had is that the battery cover keeps falling off. I've had to start screwing it down, which is fine since I only need to open it about once a week to charge the batteries.
Last edited:
Got it. The pic helped a lot.
Thanks so much ~ P
Yeah, the upac is what I'm trying to get him to make me only at 5V. We're still working on it.
Thanks so much ~ P
Yeah, the upac is what I'm trying to get him to make me only at 5V. We're still working on it.
Last edited:
Good mod Moon! Thanks for posting it.
I'll have to give this one a try; After I finish a few other bbox mods that are ratteling around in my head.
Modding is like chips. You can't do just one.
I'll have to give this one a try; After I finish a few other bbox mods that are ratteling around in my head.
Modding is like chips. You can't do just one.
Not after you get used to it. Pumping too much is the same as overfilling the cart, but when you get the hang of it you learn how many drags you can take before it needs a pump to top off the cart.
I'd guess I take about 10-15 good drags before I give it a pump.
Last edited:
Hi all, I created this using a 3 AAA bat box and a 2 AA bat box. It's a god send. I've been using mine for give or take a month now and it's working beautifully. No liquid in the mouth. My feeder tube points down toward the heating element so it is absorbed immediately. I don't use my extra carts anymore. 3AAA holds the liquid container in the box, in the 2AA box, liquid container is velcro strapped outside the box.
As far as I know you're the only other person to build one. I'm glad to hear it works for you, but it also makes me a little sad that no one else has tried.
As far as I know you're the only other person to build one. I'm glad to hear it works for you, but it also makes me a little sad that no one else has tried.
Mine is in the archives somewhere ...
Mine is in the archives somewhere ...
No, I meant following my personal version. You had your own (very different) version, right?
Last edited:
As far as I know you're the only other person to build one. I'm glad to hear it works for you, but it also makes me a little sad that no one else has tried.
I'm working on a UPAC right now Moon! I've had the parts for awhile now, time to get off my .... and make the thing! I'm a bit of a lurker, but have followed a few of your threads and have to say, they are much appreciated! Now the only questions are... 510 or 801 and 3.7v or 7.4?!? 8-o
This mod looks great and I appreciate everyone that shares their mods and/or little tips and tricks about the way they do things.
I have been vaping for a while now and was looking into buying mod of some sort or possibly attempting to build my own. I was gonna start off easy with a Nicostick. After lurking around looking at a bunch of different mods and the way they're built, wired, etc, I think I pretty much get it and may attempt the UPAC as my 1st.
I just had 1 question so far Moonman. On the UPAC's sprayer when you drill in from the top, you're drilling the hole so you can fit the tubing down in there tightly as far as it goes and you don't have to do anything to the existing hole in the side like filling it somehow so it doesn't leak out from there right? If I'm understanding it right the tube you insert in the top will go all the way down and the hole in the side won't mater at all right?
I have been vaping for a while now and was looking into buying mod of some sort or possibly attempting to build my own. I was gonna start off easy with a Nicostick. After lurking around looking at a bunch of different mods and the way they're built, wired, etc, I think I pretty much get it and may attempt the UPAC as my 1st.
I just had 1 question so far Moonman. On the UPAC's sprayer when you drill in from the top, you're drilling the hole so you can fit the tubing down in there tightly as far as it goes and you don't have to do anything to the existing hole in the side like filling it somehow so it doesn't leak out from there right? If I'm understanding it right the tube you insert in the top will go all the way down and the hole in the side won't mater at all right?
I thought it may leak through the original spray hole, so I filled it in with a bit of glue just to be sure. I don't remember if I tested it first to see if that was actually an issue, I just figured better safe than sorry.
- Status
Similar threads
- Locked
