The Baby Raven Has Hatched - Shorty PHOENiX Raven 2.0ml 35mm AVAILABLE NOW

[dannoman]

GotVapes PHOENiX Baby Raven™ tank 510 Bottom Coil 2.0ml 2.4ohm
$8.95

Introducing the GotVapes PHOENiX Baby Raven 2.0ml - the younger sibling of the original 3.5ml Raven. The Baby Raven utilizes a 35mm bottom coil fillerless carto while the regular Raven is 45mm. This is a flangeless system. See the pictures on the left. We will be getting 35mm Ravens in stock for separate purchase but you should be able to use most other 35mm cartos such as our SMOKtech 35mm DCT.

The PHOENiX Baby Raven™ does not require a pressurized fill. It can be filled by simply pushing down on the steel-encased PHOENiX fillerless cartomizer, then pulling out the flanged carto at the bottom, then filling straight from your juice bottle if you wish:

Facts & Info - The GotVapes PHOENiX Baby Raven™

• The 2.0ml tank is made of polypropolene (PP)
• The top and bottom caps are well sealed and made of aluminum.
• The steel-encased PHOENiX Raven™ carto is bottom-coil and fillerless.
• You can use any standard 510 drip tip for your mouthpiece.
• When using a carto for the first time drip 3-4 drops down the carto tube, then take a few dry draws to get the capillary action going for best results.
• With this listing you will receive one COMPLETE 2.0ml CLEAR GotVapes PHOENiX Baby Raven™, including tank assembly, 2.4-2.6ohm bottom coil carto and one mouthpiece with this purchase.

GotVapes PHOENiX Baby Raven™ Tank 510 Bottom Coil 2.0ml 2.4ohm [gv-PhoenixBabyRaven-2.0ml-CLEAR] - $8.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[yiddleboge6]

OMG!!!!! thank you Danno!!!!!

 

[badkolo]

Dan sit down and relax, take a deep breathe, you just gave birth to a baby raven, you look exhausted my friend, ill get a crew there to wipe the sweat off you and tuck you in

our little hatchling, we so proud, get a blanket stat, wanna keep our baby warm

 

[dannoman]

lol........

 

[yiddleboge6]

I NEED this....and lots of extra cartos for it......coming soon, I hope?

 

[VapingTurtle]

Nasty Danno pushes Baby Ravens out of their comfortable nest!

 

[byggd]

Cool!!!!!!!!!!!

 

[yiddleboge6]

 

[yiddleboge6]

early morning bump....

 

[JoAnnW]

Will the 35mm baby raven's replacement cartos be available with and without the flange?

 

[ScubaBebe]

When will the Baby Raven cartos be available?
I can't stand regular cartos after using the Phoenix fillerless but I am having problems with leaking through the post, how can I fix this? The only tank that seems to be ok most of the time is the nest tank, which I love, but I do want to be able to use my other tanks. Any help with a fix would be much appreciated.

 

[Gypzy.Mama]

When will the Baby Raven cartos be available?
I can't stand regular cartos after using the Phoenix fillerless but I am having problems with leaking through the post, how can I fix this? The only tank that seems to be ok most of the time is the nest tank, which I love, but I do want to be able to use my other tanks. Any help with a fix would be much appreciated.

I'm wondering this too. Those Raven cartos have me spoiled.

Sent from my SGH-T889 using Tapatalk 4

 

[ScubaBebe]

I love the Raven cartos too! I am in need of a little help. I'm having a problem with leaking. I've read through several threads and have seen pressure mentioned when filling but haven't found the answers yet. Thought it might just need bigger o rings?
Can someone please give me the tips and tricks to making these work or post the link to the thread? I never want to use a reg carto again but I'm losing too much juice in all my tanks except the nest tanks. They seem to be okay but all the others including the Ravens leak like crazy. Help please!

 

[Gypzy.Mama]

I wish I had an answer. Mine start flooding and leaking halfway through the tank. I just popped one in a pyrex SmokTech tank, so I'm looking forward to seeing how it does. I started running a Qtip down the carto and in the battery connector when it starts flooding, but that only buys me a quarter tank of vaping before it floods and leaks again. Maybe someone else has answers.

Sent from my SGH-T889 using Tapatalk 4

 

[Adrena]

I love the Raven cartos too! I am in need of a little help. I'm having a problem with leaking. I've read through several threads and have seen pressure mentioned when filling but haven't found the answers yet. Thought it might just need bigger o rings?
Can someone please give me the tips and tricks to making these work or post the link to the thread? I never want to use a reg carto again but I'm losing too much juice in all my tanks except the nest tanks. They seem to be okay but all the others including the Ravens leak like crazy. Help please!

Are you leaking down the outside of the carto where the tank grips?

 

[Adrena]

I wish I had an answer. Mine start flooding and leaking halfway through the tank. I just popped one in a pyrex SmokTech tank, so I'm looking forward to seeing how it does. I started running a Qtip down the carto and in the battery connector when it starts flooding, but that only buys me a quarter tank of vaping before it floods and leaks again. Maybe someone else has answers.

Sent from my SGH-T889 using Tapatalk 4

Only thing I can think of is try to blow through the connector end upward?
Maybe take a needle or pin and see is you cant reposition the wicks to fill both holes?
Honestly I have no clue, not had a leak from a Raven, yet. *knock on wood*

 

[Gypzy.Mama]

For whatever reason, when I try blowing from the connector end it floods even worse, to the point I have to completely dump the tank, rinse and dry burn the carto. I'm wondering if maybe there's a problem with a seal or something. Had zero issues with flooding or leaking on my last Raven (that I lost :/). So far none with my SmokTech tank either. I wasn't paying attention and put a flanged carto in with the tank upside down, but hey it's actually working really well.

Sent from my SGH-T889 using Tapatalk 4

 

[badkolo]

For whatever reason, when I try blowing from the connector end it floods even worse, to the point I have to completely dump the tank, rinse and dry burn the carto. I'm wondering if maybe there's a problem with a seal or something. Had zero issues with flooding or leaking on my last Raven (that I lost :/). So far none with my SmokTech tank either. I wasn't paying attention and put a flanged carto in with the tank upside down, but hey it's actually working really well.

Sent from my SGH-T889 using Tapatalk 4

gypsy follow this if you dont mind for testing purposes on the one with the issue, empty out the juice, rince it out like you normally do,, cover the connector and fill with hot water then blow it through, then clean like normal, flick dry, and dry burn, normal stuff... now if you have a long pin or even a qtip, snap off the cotton part so you have a stick or use a tooth pic, see if you can get some light down the tube so you can see the wick and coil , now with whatever tool you have try to reposition the wick and coil so the coil is centered and the wicks are fluffed on each side. then fill and try it out.

 

[lorikay13]

Just wondering if there are any plans for a Pyrex Raven? I love my Baby Raven but have also recently got back into trying new juices and fell in love with KeyLime. I hear that citrus can be a tank killer but then I'm also thinking that there is a difference between polypro and other types of non-glass material? Is that correct? Will polypro stand up to high acidic liquids? I don't want to hurt the poor thing.

 

[Gypzy.Mama]

gypsy follow this if you dont mind for testing purposes on the one with the issue, empty out the juice, rince it out like you normally do,, cover the connector and fill with hot water then blow it through, then clean like normal, flick dry, and dry burn, normal stuff... now if you have a long pin or even a qtip, snap off the cotton part so you have a stick or use a tooth pic, see if you can get some light down the tube so you can see the wick and coil , now with whatever tool you have try to reposition the wick and coil so the coil is centered and the wicks are fluffed on each side. then fill and try it out.

Hoping this fixes it. On one, the coil was completely off-center and you could see straight through the connector. Got it fixed and testing it out now. The other, I wasn't able to do much repositioning. It appears that there are two metal cylinders maybe and the wick holes aren't properly aligned so the whole coil assembly is just about fubar. Tried to re-center it and got the wicks fluffed, but not sure how it will do.

Sent from my SGH-T889 using Tapatalk 4