- Status
I don't prime before putting it in the tank but I do drip 5-6 drops before the first puff on it.
real soft hits don't seem to pull the juice into the atty as well as a medium hard hit does. If you hit light you may need to do a dry hit every so often.
You do want that coil nice and wet before you start vaping
Last edited:
Tried the Raven in the BB...not impressed :/ If I had a lathe it would be super easy to retrofit the insides vision clearo to fit in the tank
(vision guts pressed into 510 base with the sleeve left in tact for 1/4", then the bottom half of an 808 with the center pin removed and the air slots machined flat to compress down from the brass screw onto the silicon top of the coil...of course you would need to add a spring or something as a ground on the base)...
but I don't have access to a shop any more
I'm sure DD will come up with something good though
(vision guts pressed into 510 base with the sleeve left in tact for 1/4", then the bottom half of an 808 with the center pin removed and the air slots machined flat to compress down from the brass screw onto the silicon top of the coil...of course you would need to add a spring or something as a ground on the base)...
but I don't have access to a shop any more
I'm sure DD will come up with something good though
Got through half a tank with the Raven, and then it started leaking like a sieve. Have no idea why.....but the juice runneth out the 510 connection like a big dog. Would be Royal Pi$$ed if that happened in my BB! So the jury is still wayyyyyyyy out for me. :-(
SOOOOOO PRETTY. I never spend money on myself (just ask my 10yr old sneakers) and had a hard time coughing up 25 bucks for a spinner....but i'm pretty sure if the "buy it" button was available i'd have clicked it already.
Kudos.
Kudos.
Keefer, my tank looks kind of like yours LOL I don't have any DC tanks so threw it into my Vaperfexion Namber tank, so far I'm liking it a lot.
Majority of the time it isn't the carto or atty at fault, it is the tanks o-rings...usually something isn't sealing. If a carto or atty is bad it will leak like a fiend while you are filling the tank.
Good evening folks. I don't frequent this thread sad to say. 
But I did managed to snag myself a BB from the classifieds and received it today. Most of the day was spent using a 510 Boge. But being the 801 Fusion fanboy that I am, I set out to get an 801 Fusion to work in the BB. While I did succeed, it was by no means an easy task. It took about 30-45 minutes with a Dremel to get it done, but I just wanted to let anyone who was curious about it know, that it can in fact be done.
View attachment 203177
But I did managed to snag myself a BB from the classifieds and received it today. Most of the day was spent using a 510 Boge. But being the 801 Fusion fanboy that I am, I set out to get an 801 Fusion to work in the BB. While I did succeed, it was by no means an easy task. It took about 30-45 minutes with a Dremel to get it done, but I just wanted to let anyone who was curious about it know, that it can in fact be done. View attachment 203177
Lots of creativity here! Amazing how much is being done with this beautiful device in such a short time. I am too scared to start screwing around with 801's and whatnot until I get a few spare tanks. It is great to see how diverse this thing can be. Thanks to all those sharing.
Hiya Bamrz! Figures I'd find you here seeing how BB's and bikes go together so well lol! 
So on my way home from work today, I was sitting in traffic vaping away as usual. I look over to the car next to me and the guy had a provari, so I waved and flashed my box. He rolled his window down and say holy crap is that the billet box! Those are so awesome! .. but then traffic started to move so I couldn't show it off any more or ask how he knew about them. But that was my first run in with another vaper that knew what it was
Sent from my SGH-T999 using Tapatalk 2
Sent from my SGH-T999 using Tapatalk 2
I set up a DCT with a Raven last night, added a sort of light flavored strawberry/menthol juice (50/50), and the flavor is awesome! I do have to be careful about chain vaping, letting it rest every couple of puffs, or it gets a funky taste. I'll dig out my Dremel tomorrow and cut one down for my BB if my boys don't bug me with other stuff.
IMHO, the Ravens have definite possibilities! Can't wait for the unflanged regular ones to become available!
Hiya Bamrz! Figures I'd find you here seeing how BB's and bikes go together so well lol!
Hello Queen!
Good to see you here too! Not surprising, since you seem to have a knack for finding great mods!
So on my way home from work today, I was sitting in traffic vaping away as usual. I look over to the car next to me and the guy had a provari, so I waved and flashed my box. He rolled his window down and say holy crap is that the billet box! Those are so awesome! .. but then traffic started to move so I couldn't show it off any more or ask how he knew about them. But that was my first run in with another vaper that knew what it was
Sent from my SGH-T999 using Tapatalk 2
People look at me like I'm smokin crack when I'm vaping. Can't wait to get my BB and watch everyone try to figure out what it is.
Sent from my SCH-I605 using Tapatalk 2
Well The Queen is The Expert at being "Royally ......" in terms of being both angry and trashed.
Having Anything Leak in a BB once I'm able to get my "Royal Hands" on one would send me into a "Royal Rampage"!!!
People look at me like I'm smokin crack when I'm vaping. Can't wait to get my BB and watch everyone try to figure out what it is.
Sent from my SCH-I605 using Tapatalk 2
i brought mine to work today, where i am allowed to vape, and they thought i was swigging booze from a flask until i blew some vape clouds lol
Ha, very funny Doug! The man makes precision machined parts to mil spec tolerance and then expects us to believe he's a some kind of gorilla using rocks! Porta-band and a belt sander <sheesh> It was that little 26tpi slip that gave it away. We know you wouldn't have used less than 36tpi on stainless! Gottch ya! We know what the HASS was doing today....
Thanks! I know that both of us have the knack for finding great mods and all things vape related!Hello Queen!
Love the new avatar you're wearing!
Who's the designer? This BB is awesome in beauty, function, adaptation, price and durability!!! I've definitely got a bead on this one...
I'm sure that this is "The One" that will not only survive, but get us both through World War Z too!
LOL!!!
I was doing that at VapeBash out of my pink flask filled to the brim with Patron Silver Label...
Thanks! I know that both of us have the knack for finding great mods and all things vape related!
Love the new avatar you're wearing!
This BB is awesome in beauty, function, adaptation, price and durability!!! I've definitely got a bead on this one...
I'm sure that this is "The One" that will not only survive, but get us both through World War Z too!
I agree with it getting us through WWZ!
My avi is actually a Tshirt design from Threadless, designed by Travis Pitts from NC.
- Status
Similar threads
