The bliSS rebuildable atomizer now in stock!

[the ob]

Are you just playing with me now??

I just took one of the smaller Zen~ o-rings (which would be used for the tank, not top cap on the Zenesis), and replaced only the very top o-ring on the Bliss that the top cap slides over before it hits the threading.

Between that and plugging the second wick hole since I'm currently only running one wick / coil has stopped all signs of leaking.

Sound like all the o rings will need to be replaced. I was just confused. Too many drinks at dinner

Btw the o ring like only shows #15. Guess it will have to wait a week.

 

[Vapor2112]

Try wrapping some thread under the existing top-cap o-ring on the bliss to fill in the channel a bit, then put the same o-ring back on. Pretty good chance that will push it out far enough to seat it better against the top cap. You'll feel some resistance putting it on if its sealing properly.

Sound like all the o rings will need to be replaced. I was just confused. Too many drinks at dinner

Btw the o ring like only shows #15. Guess it will have to wait a week.

 

[Flapenn]

This thing taste and hits like a champ, I have been using it and wiping it down I'll be happy when I get the o-rings but the thing is too good to not use already lol

and its also pretty damn legit looking



Sent by Jedi mind tricks.

 

[the ob]

Anyone know the exact measurements of the I rings and not just the number.

I am at the store and they are only sorted by size.

 

[the ob]

ok, bought some o-rings to tide me over till the real ones show up.

I am not home in front of my device, but I will be surprised if these #15 fit. They are huge. I mean the width of the actual rubber.

 

[jayson]

ok, bought some o-rings to tide me over till the real ones show up.

I am not home in front of my device, but I will be surprised if these #15 fit. They are huge. I mean the width of the actual rubber.

015 are for the tank. 014 are for the top cap. The link I posted to amazon actually listed all the dimensions for each size.

 

[jayson]

Dash Size Nominal ID Nominal OD Nominal Width Actual ID Actual OD Actual Width

014 1/2" 5/8" 1/16" 0.489" 0.629" 0.07"


015 9/16" 11/16" 1/16" 0.551" 0.691" 0.07"

 

[Don Kaluminati]

Check this out... I ordered my bliss on monday and have been watching the tracking. USPS said it was supposed to be here yesterday but I checked the tracking this morning and it left my state, Washington, and took a trip down to California for some crazy reason. Why is it now in CA? Is my bliss trying to become a Son of Anarchy or something? It was in Spokane WA and now it is in Goleta CA...

 

[the ob]

Dash Size Nominal ID Nominal OD Nominal Width Actual ID Actual OD Actual Width

014 1/2" 5/8" 1/16" 0.489" 0.629" 0.07"


015 9/16" 11/16" 1/16" 0.551" 0.691" 0.07"

I saw that after I asked the question. It will teach me to read and have more patience thanks!

 

[jayson]

Check this out... I ordered my bliss on monday and have been watching the tracking. USPS said it was supposed to be here yesterday but I checked the tracking this morning and it left my state, Washington, and took a trip down to California for some crazy reason. Why is it now in CA? Is my bliss trying to become a Son of Anarchy or something? It was in Spokane WA and now it is in Goleta CA...

It's actually been a while since I've seen the USPS mess up that bad. You should have had it in two days.

 

[tierrataz]

Don, I feel ya. Once my package from Greece was released from customs hell (5 days) it went to VA and has been there 3 days (scanned daily). I'm in Cali. Thank goodness USPS doesn't make vape gear.

 

[bjannr]

When the Bliss is available again, will the leaking issues be corrected? I am using one now that I got from the classifieds and love it. I went through about 5 tanks and no leaks. Then this morning I saw juice where it shouldn't have been. I will have to try it again. Maybe it just over wicked itself.

 

[Don Kaluminati]

It's actually been a while since I've seen the USPS mess up that bad. You should have had it in two days.

Thanks. I'm assuming you are part of the elite team. I in no way whatsoever am placing blame where it doesn't belong. It would have been here already which is incredibly fast if USPS didn't send my bliss on an adventure around the states lol.

 

[blondie1964]

Just got my Bliss yesterday, and im not having any issues. the bliss totally rocks with double coils.
no leaking issues and no issues with center pin. thanks for awesome device and quick ship..........

 

[jayson]

Just got my Bliss yesterday, and im not having any issues. the bliss totally rocks with double coils.
no leaking issues and no issues with center pin. thanks for awesome device and quick ship..........

Nice!

Our local gathering was last night. It was pretty cool to see everybody with their blisses.

 

[Don Kaluminati]

I was ecstatic when my bliss arrived this morning from it's cross country detour courtesy of USPS. Which was quickly followed by devastation. It arrived with a shattered tank. I'm hoping and preying that you guys have more. I want to order a backup too and an extra set of o-rings. I put in an inquiry on elite's site.... there are forces working against me which I cannot explain. I've never even gotten to try a ss mesh genny out yet lol. Still waiting on my cobra which will probably show up with a busted tank too knowing my luck.

 

[jayson]

I was ecstatic when my bliss arrived this morning from it's cross country detour courtesy of USPS. Which was quickly followed by devastation. It arrived with a shattered tank. I'm hoping and preying that you guys have more. I want to order a backup too and an extra set of o-rings. I put in an inquiry on elite's site.... there are forces working against me which I cannot explain. I've never even gotten to try a genny out yet lol. Still waiting on my cobra which will probably show up with a busted tank too knowing my luck.

Got your email and we will get it taken care of. Not sure what USPS did to your package. It is pretty hard to break the tank when it is assembled.

 

[jayson]

O-rings are here. It seems like the 014 silicone works well for all three o-rings. I will leave water on it tonight, then get them all shipped out tomorrow.

 

[Don Kaluminati]

Got your email and we will get it taken care of. Not sure what USPS did to your package. It is pretty hard to break the tank when it is assembled.

Thanks Jayson I have no idea how it broke. I inspected it for any type of dings around the windows... nothing. The only thing I can think of is maybe it took a huge drop or was tossed or something. Nothing penetrated the package and like I said the exterior ss is flawless and unmarked. My heart dropped when I saw the crack through the window. This thing looks high speed low drag.

 

[digunderground]

I was ecstatic when my bliss arrived this morning from it's cross country detour courtesy of USPS. Which was quickly followed by devastation. It arrived with a shattered tank. I'm hoping and preying that you guys have more. I want to order a backup too and an extra set of o-rings. I put in an inquiry on elite's site.... there are forces working against me which I cannot explain. I've never even gotten to try a genny out yet lol. Still waiting on my cobra which will probably show up with a busted tank too knowing my luck.

Don- Sorry to hear. Mine arrived broken too (crack up the side), but I was lucky enough to have been able to order a spare. Once you get the new one you will love it.


Jayson- Any word on when glass tanks will be back up on the site? At this point im not even concerned about the o-rings, just want a few extra tanks. ill stalk the site and this thread in the meantime.. haha