The bliSS rebuildable atomizer now in stock!
- Thread starter jayson
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo lavatube provari revolution
- Status
Is it possible to enlarge the air holes without using a drill? Is there a reamer or something suitable to enlarge it? I dont have a drill, I know what? a man without a drill!
Only way I know how to do it is with a drill and a good fresh bit. All the reamers I have seen taper (and are larger than you would want) this would leave a hole that is noticibly wider on the outside than inside. I'll venture to say its possible but not recommended and probably is a little unsightly when done. IMHO it is worth widening one of the holes out, both would be a little airy for my taste.
I see you are in Orlando, if you are ever in sofla let me know.. You can try my bliss with the hole widened and I'll drill yours out if you want. If I head up there ill let you know too. I have a friend in Oviedo that might be willing to help too.
Last edited:
Yes a drill is the best way to enlarge a hole, I used a 1/16" bit and enlarged only one of the hole and i'm really liking it.
I can't seem to get my bliSS to fire on my Provari, I seem to remember reading somewhere that the pin may need to be knocked down? Can someone explain to me how to do this safely please....
I second this... Are we still looking at October for a release / payment? I haven't seen anything about this since mid last month, beginning to wonder if its still happening.
Pull wicks and wires out. Remove screws and washers from center post.
Option #1:
Cover with a cloth and gently tap (TAP VERY LIGHTLY, not hit) the center post, make sure the bottom 510/post isnt sitting on the table/surface because then it won't move the post
I had to rest the flat bottom part on the edge of the table with the entire 510 hanging off the table, then tap gently. Option #2:
push the top post against a solid surface like a table or door frame. I found this method to be less accurate.
Well, my bliSS was out for delivery today but didn't show up in the mail. Finally at 4:30 I went to the PO. They have lost it! They are going to talk to my mail carrier in the morning. Hoping to have it in hand tomorrow.
The USPS is driving me crazy lately. They lost a large priority mail package coming to us.
I am still pushing for them. It will probably be a few more weeks. Production is just starting.
Yeah, I hear ya, that's the second package of mine they fumbled in less than a week.
Jayson- I know we must be driving you mad with questions about this, but thanks for answering anyway! Its just that we all love your customer service and great products so you have us all hooked and excited.. might be annoying but its a good thing
hahaha Will you post in this thread when they are ready? or should we look for a new "bliss titanium rebuildable atomizer now in stock" thread ?
Can any one tell me the difference in a version one and two ext.
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
This has got to be the only piece I have ever gotten that I flat out regret.....
Sorry to hear that LongHaul, what dont you like? do you have a v1 or v2? I have helped a few people through PM get theirs up an running great, so if you are open to tinkering let me know here or PM me and ill do all that I can to help. Ill admit its not the easiest to get performing 100%, but when you do its one of the best imho.
I rebuild all my vapes and a ZAG is my go to.....but for 140 bucks this thing needs to jump out of the box rockin....shouldn't have to tinker.
After every wick style and mesh it's going on the classies.
I understand. I like the fact that I could customize this one, it comes with a tight draw cap that works well but doesn't produce a ton of vapor. By opening up the airflow a little it out performs every zen/or genesis I have tried and is on par with the hellfires I have tried. The Zens are Great attys and just work out of the box, every one is the exact same, and produces the exact sam vapor. I just prefer a little more extreme vapor, and the bliss can get there. mild to wild you can make your bliss what you want.
Sorry I couldnt help.
I gotta say,
I just got a Bliss yesterday from a classified trade.
Out of the box I wasn't happy with it at all.
Tried all kinds of setups, coils and wicks.
I bored out one air hole to 16th of an inch
Ended up with a solid Wick and a four wrap Of 32 guage kanthal.
That set up same juice is blowing away my Zen atties.
And I run a three wrap of 30 guage on the zens.
Not knocking either product they just run different.
Sent from my Galaxy Nexus using Tapatalk 2
I just got a Bliss yesterday from a classified trade.
Out of the box I wasn't happy with it at all.
Tried all kinds of setups, coils and wicks.
I bored out one air hole to 16th of an inch
Ended up with a solid Wick and a four wrap Of 32 guage kanthal.
That set up same juice is blowing away my Zen atties.
And I run a three wrap of 30 guage on the zens.
Not knocking either product they just run different.
Sent from my Galaxy Nexus using Tapatalk 2
Horses for courses, not every atty is perfect for everyone. I wish I only had one regretful purchase.
BliSS rocks the best flavor of any atty I have tried including many highly sought after models. My #1 criteria is flavor, the rest I can tweak in the build. The chamber design, size, & airflow are perfect for producing the intense flavor I crave.
BliSS rocks the best flavor of any atty I have tried including many highly sought after models. My #1 criteria is flavor, the rest I can tweak in the build. The chamber design, size, & airflow are perfect for producing the intense flavor I crave.
Genesis devices in general have a large learning curve. These devices are for experienced vaper's who have the time and interest to dedicate to learning and understanding the in's and out's of how these devices work. Once this is achieved the payoff is amazing. I understand this particular device had a bit of a leaking issue, Mine does as well, but this is a simple fix. Any other issues besides the leaking, are user error and cannot be blamed on the device. As Keegan pointed out, this is a different type of device than the Zen lineup. This is a great example of the only difference between gennys. What surrounds a wick and coil doesn't change any further than Keegan mentioned. So once the setup is mastered you can use any genny and enjoy the benefits.
I personally own many RBAs and the Bliss is one of my favorites. This device will end up being one of the greats that will be around in the end.
I personally own many RBAs and the Bliss is one of my favorites. This device will end up being one of the greats that will be around in the end.
- Status
Similar threads
- Locked
